Dutch Windmill
Save Project to My Library
Other Products: Resin Figure, Cutting file Dutch Windmill, Cardstock: Red, White, Light Blue, Green, Light Green, Light brown, Paper Dutch Flag, Cutting machine, acetate.
For more tips on creating with the Tulip Time collection, watch the tutorial at https://youtu.be/rfYMxeNBmJk.
Instructions: Click here to view a larger photo of this project. Cut the SVG file out using the cardstock colours. Put it together by following the Instructions that comes with it. Put a drop of the Nuvo drops on the door like a doorknob. Cut a border of the designer paper and put that in front of the door, like a doormat.
Stamp the fence with the Tuxedo Black ink on white cardstock, color it very lightly with Rich Cocoa ink, die cut the fence with the coordinating die, cut the fence in half and glue this on the front of the box with the long posts in the center.
Stamp the tulips from the same set as the fence, using black ink and color them with Fern Leaf and Leaf Green inks for the leaves and Vermillion ink for the tulips, die cut with coordinating die. Glue all the tulips around the windmill and in the front of the windmill where the fence is.
Now you can glue your resin figure in front of the windmill, add some 3D lacquer on your lattice flag and glue it on a very tiny strip of acetate to make it stronger, let it dry and glue the lattice flag on the blade.
Created By: Els Schutte
Truckin' Through the Garden
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Memento Dye Ink Pad - Morocco, TSMP201
Deluxe Flower Shaping Kit, HCST1-401
Memento Dye Ink Pad - Lady Bug, TSMP300
Wildwood Cottage Accents Cling Stamp Set, HCPC-3772
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Wildwood Cottage Accents Die, HCD1-7128
Stack and Store Daubers-Pack of 30, HCDA2-450
Simply Classic Die, HCD1-7159
Simply Classic Cling Stamp Set, HCPC-3801
Ranger Archival Ink Pad - Buttercup, RACP632
Ranger Archival Ink Pad - Fern Green, RACP962
Ranger Archival Ink Pad - Leaf Green, RACP436
Nuvo Crystal Drops - Ivory Seashell , NU675
Backyard Blossoms Cling Stamp Set, HCPC-3827
Backyard Blossoms Die, HCD1-7181
Created by: Els Schutte
All Laced Up
Save Project to My Library
Other Products: Scissor, tape, Cutting machine, Lace, Rose lace, Resin Flower, Fine liner, Eyelets, Ribbon, Bustier svg File, Crop-a-dile, Gluegun
For more tips on creating with the Floral Fashionista collection, watch the tutorial at https://youtu.be/9V6JOqdQtC8.
Instructions: Click here to see a larger photo of this project. Find the svg file here. Choose a nice paper of the beautiful paper Collection and a cardstock that will fit that color, and cut the Corset out of it, follow the instruction how to put it together. In the cardstock front pieces, you make some holes with a crop-a-dile and put some eyelets in the holes, you can do this also with the Crop-a-dile! Pull a ribbon through the holes and make a bow. On top of the corset you can place some Lace, and Rose lace, any lace will work! There are slits in the handle, you can also pull a ribbon through it and then glue it on the inside of the sides of the corset. Place the Resin Flower in the center of the corset above the bow.
Created By: Els Schutte
Save Project to My Library
The Envelope Please
Products Used
Designer Dries Clear Adhesive, 159723Memento Dye Ink Pad - Rich Cocoa, TSMP800
Memento Dye Ink Pad - Morocco, TSMP201
Deluxe Flower Shaping Kit, HCST1-401
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Stack and Store Daubers-Pack of 30, HCDA2-450
Bright Pearl Stamens-Small, HCS1-458-1
Ranger Archival Ink Pad - Buttercup, RACP632
Ranger Archival Ink Pad - Leaf Green, RACP436
Merry and Bright Accents Cling Stamp Set, HCPC-3838
Merry and Bright Accents Die, HCD1-7196
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Oakberry Cottage & Sentiments Cling Stamp Set, HCPC-3840
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Cottage Die, HCD1-7198
3D Blossoms Shaping Mold, HCFB1-469
Hand-Stitched Background Cling Stamp Set, HCPC-3854
Patchwork Daisy Cling Stamp Set, HCPC-3852
Patchwork Daisy Paper Collection, HCDP1-296
12" x 12" Insta-Album - Kraft, HCIA1-470
Other Products: 2 small envelopes, Brown cardstock, Creme cardstock, very small magnets, 3d foam pads
For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.
For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.
Instructions: Take the 2 envelopes and glue the flap of one envelope in the other envelope, now fold it double and you have the map, place the magnets on the inside on each side. Cover the whole map with paper from the collection.
Cut a piece of Brown Cardstock at 3 5/8 x 5 1/8" and glue this on the cover, cut a piece of Creme Cardstock at 5 x 3 1/2". Take your Hand stitched background stamp and Morocco Ink and stamp it on the creme cardstock, then take the big flower of the patchwork Daisy set and stamp it with the Rich Cocoa on top of the Creme cardstock, now glue this one down on the cover too.
Stamp with the Oak berry lane Blossom set and Rich Cocoa 2x the Big flower and 3x the leaves, now cut them out with the coordinating dies. Color the center of the flowers with Buttercup and the outsides with the Morocco, color the leaves with Leaf Green and some spots with the morocco, Place the flowers and leaves in the mold, spray them light with water put the lid on it and run it through the machine. Now glue 2 flowers on top of each other, make a hole in the center and pull the stamens through, stamp 2 acorns with Rich cocoa and color them very light with that too then on top some Morocco, cut them out with the coordinating die, Stamp with Rich Cocoa 2 sets of the pine tree leaves and color them with leaf green, cut them out with the coordinating die, now glue everything on the cover of your card in a nice composition.
Take a filmstrip from the big album and cut out 2 pieces and glue them on 3 sides on the inside, then you have 2 pockets to put a photo in.
Now cut 2 pieces of brown cardstock 3 1/2 x 5 1/2 for the inside of the envelopes.
Created by: Els Schutte
Hats Off to You
Products Used
Designer Dries Clear Adhesive, 159723Memento Dye Ink Pad - Rhubarb Stalk, TSMP301
Memento Dye Ink Pad - Toffee Crunch, TSMP805
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Deluxe Flower Shaping Kit, HCST1-401
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Stack and Store Daubers-Pack of 30, HCDA2-450
Bright Bead Stamens-Medium, HCS1-458-3
Bridal Bouquet Stamens-Small, HCS1-460
Ranger Archival Ink Pad - Majestic Violet, RACP494
Ranger Archival Ink Pad - Buttercup, RACP632
Ranger Archival Ink Pad - Leaf Green, RACP436
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Oakberry Lane Blossoms Die, HCD1-7200
3D Blossoms Shaping Mold, HCFB1-469
Patchwork Daisy Border Cling Stamp Set, HCPC-3853
Patchwork Daisy Paper Collection, HCDP1-296
Patchwork Daisy Border Die, HCD1-7209
Other Products: Silver Pin, Lilac Ribbon, clasp, Hat Pattern, Cutting machine, glue gun.
For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.
Instructions: Click here to view a larger photo of this project. Find the cut file for the hat here. Using white cardstock and Rhubarb Stalk ink, stamp the 1 large 1 medium and 1 small Oakberry Lane Blossoms. Using Majestic Violet ink, stamp 3 large, 1 medium and 1 small Oakberry Lane Blossoms. Die cut with coordinating dies. Color the center of the flowers with Buttercup ink and the petals with Majestic Violet ink. Place blossoms in the 3D mold, spray them lightly with water and place the lid on, run through the machine. Layer 2 blossoms together of the large and medium blossoms, creating 3 layered flowers. Make a hole in the center of the flowers and pull the stamens through. On the small flowers use only 1 bead stamen in the center of each flower.
Stamp the small flower flourish from the Patchwork Daisy Border die with Tuxedo Black ink on white cardstock, color the flowers with Majestic Violet and the leaves with Leaf Green, die cut with the connected die. Cut the hat with paper from the paper Collection using your electronic die cutting machine and this https://www.silhouettedesignstore.com/view-shape/67665 cut file, reduce the size till you like it. Assemble the hat. Then take the ribbon and the clasp and place along the bottom of the hat and create a nice bow.
Cut the small flower flourish in half, and arrange flowers as shown. Finally add the silver pin.
Created by: Els Schutte
Summer Vacation
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
3-D Crystal Lacquer, 3D1844
Memento Dye Ink Pad - Rhubarb Stalk, TSMP301
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Deluxe Flower Shaping Kit, HCST1-401
Tropical Hibiscus Cling Stamp Set, HCPC-3736
Tropical Hibiscus Die, HCD1-796
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Stack and Store Daubers-Pack of 30, HCDA2-450
Young at Heart Paper Collection, HCDP1-283
Card Shadow Box Set-Kraft, HCBC1-456-3
Bright Pearl Stamens-Small, HCS1-458-1
Rain Boots and Blossoms Cling Stamp Set, HCPC-3811
Rain Boots and Blossoms Die, HCD1-7169
Large Sweet Peony Cling Stamp Set, HCPC-3820
Sweet Peony Paper Collection, HCDP1-288
Large Sweet Peony Die, HCD1-7174
Ranger Archival Ink Pad - Vibrant Fuchsia, RACP524
Butterfly Dreams Paper Collection, HCDP1-289
Leafy Accents Die, HCD1-7193
3D Leafy Accents Shaping Mold, HCFB1-467
Blossoming Coneflower Cling Stamp Set, HCPC-3826
Backyard Blossoms Paper Collection, HCDP1-290
Blossoming Coneflower Die, HCD1-7180
Sweet as Honey Paper Collection, HCDP1-291
Leafy Accents Cling Stamp Set, HCPC-3835
Merry and Bright Accents Cling Stamp Set, HCPC-3838
Merry and Bright Accents Die, HCD1-7196
3D Blossoms Shaping Mold, HCFB1-469
Buttons and Blooms Paper Collection, HCDP1-295
12" x 12" Insta-Album - Kraft, HCIA1-470
Ornate Pocket Accents Die, HCD1-7214
Elegant Pocket Accents Die, HCD1-7213
Petite Pocket Accents Die, HCD1-7212
Decorative Pocket Accents Die, HCD1-7211
Other Products: Silver Washi Tape, Charms, cardstock: Purple, Ocre, Dark Blue, Pink, Red, Light Green, Orange, Dark green, Light Blue Creme; Pearl string, Bling on the Roll, Assorted Ribbons and Lace, Rub on Images, Silver Sticker Paper, Button, Assorted Stickers, Paperclip, Brads, Chain, Internet Image, Gold Paper, Clay Charm, Glitter Flowers Ornament, Cut Out Parasailing, Straw, Acetate, Gesso, Die Cutting Machine, Paper Cutter, Ruler, Blade, Scissor, Tape.
For more tips on creating with the pocket dies, watch the tutorial at https://youtu.be/uDhKUj9AAMo.
For more tips on creating with the 12 x12 Insta-Album, watch the tutorial at https://youtu.be/d5BIbbxA5u4.
Instructions: Click here to view more photos of this album. Cover the front cover with purple cardstock, then layer your photo on it. I used Photoshop to add text to my 11 1/4 X 11 1/4" photo creation. Layer ribbons along the bottom. Stamp with Rhubarb Stalk ink the big and smaller peony on white cardstock, color them in the center with Buttercup and the ends with Vibrant Fuchsia, then cut them out with the coordinating dies. Shape them using your Deluxe shaping kit. Make a hole in them and place the stamens in the center. Stamp with Rich Cocoa and the Leafy accents stamp some leaves on white cardstock, color them with Bamboo Leaves and Vibrant Fuchsia, die cut with the coordinating die and place them in the 3D mold, spray with water, put the lid on and run them through the machine. Arrange flowers as shown, adding pearl decorations. For the flap you take a purple cardstock and cut that on the right size, take the filmstrip and place the photo's behind it, glue this down, next to the filmstrip on both sides you can place a double piece of the bling on the roll, then take some Silver Washi tape and fold this over the edge, use 3 strips for this!
For the teal flip fold, choose your paper from the paper collections. Mat your photo on red cardstock and place it on the paper., Die cut the Decorative Pocket Accents die from red cardstock and now glue this on the top left corner of the photo. Since the teal paper is too large to fit in the die cutting machine, use your knife to cut a slit in the opening of that die. This will create the pocket. Take the corner die of the Ornate Pocket Accents die and die cut it from red cardstock and glue this on the right bottom part around the photo. Take 2 pieces of chain and glue this under the edge of the corner. Cut a word or sentiment from paper and mat with red cardstock. Glue this on the bottom of the chains to create a sign. Using black ink, stamp the denim pocket on white cardstock and die cut. Color with Teal Zeal ink, adhere a wooden button on the pocket. Add glue along the edges, without adding glue behind the photo as this will be your pocket. Add tickets, or anything personal, including the denim pocket you've created. Adhere swan sticker and add Crystal Lacquer as water splashes.
For the green flip fold, choose your paper and adhere to flip fold. Take a vertical photo and die cut the eyelet border die along the bottom, saving both pieces of the photo. Mat your photo on white cardstock allowing extra space between the die cut. Die cut border along the white opening of the photo mat. Stamp a sentiment from the butterfly collection under due cut border. Die cut the beautiful corner of the Ornate Pocket Accents die from white cardstock and place this on the upper left corner of the photo. Add sentiment sticker as desired.
Add paper to remainder of book. Embellish as desired. I die cut the elegant corner pocket from dark blue cardstock and adhered in the lower right hand side and stamped the Oak berry Blossom in Rhubarb Stalk ink, on white paper and die cut. Color with Buttercup in the center and Vibrant Fuchsia ink on the ends and shape using the coordinating mold. Using green cardstock and a scissors fussy cut a palm branch and adhere these in the upper right corner. Add sentiment stickers and images fussy cut from paper as desired. I will place more photos on my blog.
Created by: Els Schutte
Have a Beautiful Day
Save Project to My Library
Other Products: Fine liner black, Flat back pearl, Bling on the roll, Foam pads, Lilac Cardstock, pencil, scissor,
For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Cut a piece of the Lilac Cardstock at 10 x 7". Score in half so you have a 5 x 7" card. Now cut a piece of the paper collection at 6 3/4 x 4 3/4", distress the edges with a scissor and glue the piece on the front of your card. Cut a piece of the lilac cardstock 1 inch wide, distress one edge and glue this on the front about 1 inch from the left corner, then take a piece of design paper also 1 inch wide, distress that and glue it down on the lilac piece overlap them. Then cut a piece of the collection at 3 1/2" wide and stamp with the Teal Zeal and the patchwork daisy Border edge stamp on 1 edge of the paper. Die cut it with the coordinating die, distress the left edge with a scissor and glue this on top of your card, fold the leaves a little bit up.
Take a strip of the bling on the role and glue that on the left side of the last paper, take your fine liner and make little stripes on the edge of the papers. Stamp with the Oakberry Blossom stamp, 4x the leaves from that set with Rich Cocoa on white cardstock and color them with the Leaf Green and the edges with some Cactus Flower, then place them in the 3D mold, spray them with water, put the lid on it and run it through the machine. Place the leaves on the front of your card under the folded leaves. Stamp the 2nd size and the 3rd size of the Buttons and Blooms flowers with Sweet Plum on white cardstock and color the center with Majestic Violet and then the rest of the flower with Cactus Flower. Shape them on your shaping mat and glue the flowers on top of each other 1 big flower and 2 small ones, place these on the edge on the right side of that edge die shape.
Place a flatback pearl in the center of the flowers, then put some glue in it and sprinkle some Crystal Clear in it, let it dry and then on top of that add a dot with the Nuvo drops Sweet Lilac. You can also put some Turquoise drops in between the flowers on your card. Cut a word from the paper collection and mat it on 3D foam pads on lilac cardstock and place this on front of your card. Cut a piece of Design paper at 6 3/4 x 4 3/4" for the right side in the card and a piece of white cardstock the same size for the left side of the inside of the card, make some lines with a pencil so you can write in the card, also make little stripes on that with the fine liner.
Created By: Els Schutte
Ric Rac Wishes
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
Memento Dye Ink Pad - Rhubarb Stalk, TSMP301
Memento Dye Ink Pad - Teal Zeal, TSMP602
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Deluxe Flower Shaping Kit, HCST1-401
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Stack and Store Daubers-Pack of 30, HCDA2-450
Lush Lilac Cling Stamp Set, HCPC-3816
Lush Lilac Die, HCD1-7170
3D Lush Lilac Shaping Mold, HCFB1-466
Ranger Archival Ink Pad - Cactus Flower, RACP985
Hand-Stitched Accents Cling Stamp Set, HCPC-3851
Patchwork Pocket & Patterns Cling Stamp Set, HCPC-3850
Buttons and Blooms Cling Stamp Set, HCPC-3849
Buttons and Blooms Paper Collection, HCDP1-295
Hand-Stitched Accents Die, HCD1-7207
Patchwork Pocket & Patterns Die, HCD1-7206
Buttons and Blooms Die, HCD1-7205
Other Products: 3d foam pads, cream cardstock, pink Cardstock, blue cardstock, cutting machine, Scor tape, black fine liner, silver flat back pearls, scissor, hole punch, small magnets.
For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Cut a piece of Creme cardstock at 7 1/2 x 8 1/2" and score the 8 1/2" side at 7 1/2" and 7 3/4". Now glue the 7 1/2" part on the end of the 8 1/2-inch part, so you have a spine now of 1/4 inch. Cut a piece of Cream cardstock at 5 3/4 x 7" score on the long side at 1/2 inch. Open up your card so the closed side is up and place this on the top on the inside, just glue the 1/2 inch flap down, now you have a fold out flap. Take a magnet and place 1 on the upper inside on the right side, put the other half on the inside of the flap on the left side.Cut 3 pieces from the paper Collection at 7 1/4 x 5 1/4" and glue 2 of them inside and 1 on the front, take a piece of cream cardstock and cut it at 5 1/2 x 3 1/2". Put glue on the 2 sides and the bottom and glue it down on the bottom part inside the card. Take a circle punch and make a 1/2 hole in it, now you have a pocket. Take a fine liner and make little stitch marks on all 4 sides of the pocket. Cut a button strip out from the paper collection and cut it at 5 1/2 inch and glue this on the pocket. Take the arrow from the Hand Stitched set and stamp it with the Tuxedo Black on the cream cardstock, now stamp Happy Birthday on it and cut it out with the connected die. Ink the edges with Teal Zeal, now put 3D foam pads on the back and place them on a piece of pattern paper. Cut with a scissor around the arrow so now you have a mat and you can place it on the bottom of the pocket too.
Cut out some of the bigger images and mat them on the blue cardstock and place them in that pocket you just made. This time I die cut out a lot of buttons from the paper collection so that they fit and match all the colors. Glue 3 Buttons with Foam tape above the button strip, now your bottom part is done. For the upper inside part you have the flap so you can cut 2 pieces of pattern paper at 5 x 6 3/4" and glue that on the in and outside of the flap. For the outside cut a strip of 4 inches from the pattern paper with the buttons and fold it double. Attach it on the front and the inside so you have a pull tab. Cut out a button from the paper and put a 3Dfoam behind it and place it on the front of the flap on the end of the pull tab. Cut also a strip from the paper with a special hug for you and glue it on the front of the flap. For the inside of the flap, just cut a piece of pattern paper 5 x 5 inches, make a mark at 1/2 inch on the bottom left side and cut it from the right upper corner to the mark of the 1/2 inch. Put glue on the right and bottom piece and place it on the inside of the flap, now you have a pocket, cut some labels and an image and mat them and put them in the pocket. Take also a button from the paper and pop it up and place it on the bottom corner of the pocket!
For the front of the card you have to take the pattern paper with the zigzag stripes and cut it at 5 1/4 x 7 1/4" with the stripes up. Ink the edges with teal Zeal and stick it down, make some stitch marks all the way round with a black fine liner. Cut a strip of design paper at 7 1/4 x 1 inch, ink the edges and glue it down off centered. Take the biggest die from the Hand Stitched Accents die and cut it out of cream cardstock, now mat it on a piece of pink cardstock and glue it down on the front of the card. Take the stamp from the Hand Stitches Accent set and stamp it with Teal Zeal on the cream cardstock, cut it out with the connected die. Color the leaves with the blender tool and Bamboo Leaves and color the flowers with Cactus Flower, glue it on top of the card. Cut out 2 zig zag strips from the paper with the zigzag die and place them on the bottom of the card, put 2 tiny buttons on the ends.
Take your Lush Lilac stamp and stamp a few Lilacs using Rhubarb Stalk ink, color them with Cactus Flower and cut them out with the coordinating die. Place them upside down in the 3D mold and spray them lightly with water, put the lid on and run them through the machine. Now you can glue the lilacs on top of the stamped flowers and place a silver pearl in the center of each flower.
Created by: Els Schutte
Walk In Closet
Save Project to My Library
Other Products: Score board, spacers, brads, flatback pearls, beads, wire, paperclips, corner stickers, holographic cardstock, 3D foamtape, sticker, dog button, ribbon, purse (sticker), wood dowel
For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.
Instructions: Click here to view a larger photo of this project. Cut a piece of brown cardstock at 7 1/2 x 8 1/2" and score the 8 1/2" side at 7 1/2" and 7 3/4". Now glue the 7 1/2" part on the end of the 8 1/2"part, so you have a spine now of 1/4 inch. Now cut out the center a hole of 4 1/2 x 3" on both sides of the score lines. Take your Paper pad and take the papers you like and cover the inside and outside of the card. Cut a piece of the dowel so that it fits on the onside of the spine, glue it in the spine! Cut a piece of the Holographic cardstock of 3/4 x 3 3/4" this if for the mirror, glue this on the left side of the card and decorate it with some corner stickers.
Cut a piece of the Brown cardstock at 4 1/2 x 1 1/2" and put 3D foam pads behind it now stick this on the bottom part of the card like a drawer, put designer paper and glue this on top of it, cut 2 pieces of brown cardstock at 1 1/2 x 3/4" and make a hole in the center get a brad and a spacer and place them in that hole fold out the brad and stick them down on the drawer. Get a piece of wire and put some beads on it close it and hang it out of the drawer, you can do that also with some Gloves (stickers). Take the Dog (button) and glue this on the left bottom corner. Take 5 paper clips and shape them into a clothes hanger, make some dresses of pattern paper and decorate them and hang them on the clothes hangers in the closet.
Created By: Els Schutte
Sew Fascinating
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
3-D Crystal Lacquer, 3D1844
Memento Dye Ink Pad - Rhubarb Stalk, TSMP301
Memento Dye Ink Pad - Teal Zeal, TSMP602
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Deluxe Flower Shaping Kit, HCST1-401
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Stack and Store Daubers-Pack of 30, HCDA2-450
Ranger Archival Ink Pad - Buttercup, RACP632
Ranger Archival Ink Pad - Cactus Flower, RACP985
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Oakberry Lane Blossoms Die, HCD1-7200
3D Blossoms Shaping Mold, HCFB1-469
Patchwork Pocket & Patterns Cling Stamp Set, HCPC-3850
Buttons and Blooms Cling Stamp Set, HCPC-3849
Buttons and Blooms Paper Collection, HCDP1-295
Hand-Stitched Accents Die, HCD1-7207
Patchwork Pocket & Patterns Die, HCD1-7206
Buttons and Blooms Die, HCD1-7205
Other Products: 3d foam pads, Brown Cardstock, Cutting machine, Scor tape, Black fine liner, Glue gun, Sewing needles, Brads, Flat back pearls, Safety pin, Lace, Paperclip, Scissor, Distress tool, Silver marker, Embroidery Twine, Seam binding
For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Take a 12 x 12" brown cardstock for the base, then take a paper from the paper Collection and cut it smaller than the cardstock and make the edges rough with a distress tool. On the above right side just make a cut and pull the distresser over it too then curl the 2 flaps, put the safety pin through it and ink all the edges with Rich Cocoa. Now glue or tape it on the brown Cardstock, do some doodling on the edges off the paper with the Black Fine liner. Cut another piece from the paper collection at 11 x 4 1/2" and place this 1 inch from the bottom and glue this down and put a brad on 3 corners.
Mat your Photo on a piece of cardstock and place this on top of the design paper, a little bit over it. Stamp with the Tuxedo black and the pocket stamp on design paper and cut it out with the coordinating die, glue 3 sides of it and place that next to the photo, then you have a pocket.
Take the same color of your photo mat and use the label from the Hand stitched accent die set, stamp also with the black some Buttons, cut them out with the Button die and color them with the Buttercup Ink, then put some 3D Crystal Lacquer on them and let them dry. Then glue them on the label and place the label in the pocket, color the needle with the silver marker and put a piece of Twine through the button and place the button on the pocket with a 3D foam pad. Place the box with sewing needles on the bottom part of the photo. Place also 3 small buttons on the left side of the Safety pin. Place a little piece of lace behind the tear you made. Stamp with the Patchwork patterns stamp and the Tuxedo Black ink on the White cardstock and color it with the Teal Zeal, cut them out with the coordinating die, place 3D foam pads behind them and stick them on the top right side of the photo. Cut a piece of the design paper of 4 x1 1/4" and fold it over the straight part of the paperclip, then cut out a stamp from the collection and glue this on top, make a bow with the seam binding on the top of the paperclip and stick this on the left corner of your layout.
Stamp with Rhubarb Stalk and the Oak berry Blossom stamp on White Cardstock and cut them out with the coordinating dies, then color them with New Sprout in the middle and on the ends with Buttercup on the petals, put them up side down in the 3D mold and mist them very lightly with water, (you can put 3 layers in if you want) put the top on the mold and run it through the machine, Now glue 1 on top of the stamp on the paperclip and put a pearl in it.
Stamp with Tuxedo Black and the Buttons and Blooms stamps on White cardstock, color them with the Buttercup, Teal Zeal and Cactus Flower and cut them out with the connected dies, place them wherever you like on the layout, on some of them you can glue some of the flowers, finish them off with some pearls. The word Buttons is from the strip of the paper collection.
Created by: Els Schutte
Sew Sweet
Save Project to My Library
Other Products: 3d foam pads, Black Cardstock, Silver Cardstock, Ochre Cardstock, 2 Paper Coaster, wool, Cutting machine, empty paper roll, Scor tape, Clear wire, Black fine liner, Silver marker, Glue gun, needle, Pins, Embellishment, small wooden spools, svg file
For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Click here to view a larger photo of this project. Take your black, silver and ochre cardstock and cut out this SVG file of the Scissor and pin cushion. Enlarge the file to 125% follow the instructions on how to put it together.
Take 2 paper coasters and cover them with paper from the paper collection and ink the edges, take a piece of the empty roll and cover this also with the design paper then glue it in between the 2 coasters, now you have a spool. Take the wool and run it around the spool and put a needle on the end and stick this as a decoration in the wool. Take the Scissor and glue this against the spool.
Put some wool in the holes of the pin cushion as if it is stitched. Make some stripes on it using a fine black marker, now you can stick some pins in it and cover the back with some white cardstock. Glue the pincushion next to the Scissor on the spool.
Take a strip of the design paper and make a tape measure with it using a silver and black marker, and glue this with a twirl on the top of the spool. Take a piece of clear wire and run this from the top through the scissors to the bottom, here you can glue some buttons on.
Using Rhubarb Stalk stamp the Oakberry Blossoms on white cardstock and cut them out with the coordinating dies, then color them with New Sprout in the middle and on the ends with Teal Zeal on the petals. Put them up side down in the 3D mold and mist them very lightly with water, you can put 3 layers in if you want. Put the top on the mold and run it through the machine. Glue 2 flowers on top of each other, make a hole in the middle and pull the stamens through. Then glue them on top and bottom of the spool.
Stamp using Tuxedo Black the Buttons and Blooms stamps on white cardstock, color them with the Buttercup, Teal Zeal and cut them out with the coordinating dies, you can glue them around the flowers on top and bottom of the spool, now put 3D Crystal lacquer on the flowers and let them dry.
Created By: Els Schutte
In Perfect Form
Save Project to My Library
Other Products: Ribbon, bling on the roll, 3d foam pads, lace, Black Cardstock, Light Blue Cardstock, Paper Coaster, Dowel, Blue pearlpen, embroidery yarn, Cutting machine, Black leather look fabric, Scor tape, Black fine liner, Glue gun, svg file Dress form, ribbon
For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Click here to view a larger photo of this project. Take your Black and Light Blue cardstock and paper from the paper collection and cut the Dress Form from this SVG file. Follow the instructions on how to put it together. To add strength, you can put a wooden dowel in the stand and then glue the whole dress form on a paper Coaster. Take some Lace and put that around the waist. Make a nice bow and glue this with the Heat gun on top of dress form.
Stamp with Rich Cocoa and the Leafy Accent stamp, two images on white cardstock and color them with the Bamboo Leaves ink. On the ends, you can use some berrylicious ink, then cut them out with the coordinating die, put them in the Leafy Accents mold, mist them lightly with water, then put the top on and run it through your machine. Glue one Leaf on top of the dress form and one on the bottom.
Stamp with Rhubarb Stalk and the Oak berry Blossom stamp on white cardstock and cut them out with the coordinating dies, then color them with New Sprout in the middle and on the ends with Berrylicious, put them upside down in the 3D mold and mist them very lightly with water, you can put 3 layers in if you want, put the top on the mold and run it through the machine. Glue 2 flowers on top of each other, make a hole in them and pull the stamens through. In the center you can add some glue and sprinkle some Shard glass on it. Then glue them on top of the upper leaves, keep one for the bottom.
Stamp with Tuxedo Black and the Buttons and Blooms and the patchwork pocket & patterns stamps on white cardstock, color them with the Buttercup and Berrylicious inks and cut them out with the coordinating dies. Make holes in the buttons and put the embroidery yarn through it, then place the quilt pieces in the centre of the dress form and make little stitches with a Black fine liner, on top of them you can put the buttons, put a piece of 3D foam under them. Glue a strip of the bling on the roll around the under part of the dress form. On the bottom part you can glue some of the leather looked fabric. Finish the bottom with some flowers and Buttons, and some Blue pearls from the pearlpen.
Created By: Els Schutte
My Everyday Moments
Save Project to My Library
Other Products: This cutting file at the Silhouette store, Blue/green Cardstock, Paper Cutter, Cutting machine, Big Shot, Foam pads.
For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.
Instructions: Click here to view a larger photo of this project. Take the file from the Silhouette store and cut it out in the color you like, put it together by folding all the score lines and glue them as the instructions tell you. Take The Acorn House stamp from the Oak berry Cottage stamp set and stamp it with Tuxedo Black on White Cardstock. Color the stamp with a mix of toffee Crunch and Rich Cocoa, cut the acorn out with the coordinating die and also the squirrel inside of the house, put her on 3D foam squares to pop her up, color her also with the Rich Cocoa and her apron with lady Bug. Put some Ivory Shells Nuvo drops on the cakes, On the glass of the windows you can put some 3D Crystal lacquer and let that dry.Cut a piece of the paper pad with a background and glue this on the back of the card like a background for the house, then glue the house in front of that on the slider flap that pops up when you pull the ribbon.
Now stamp the flowers and grasses from the woodsy wonderland with the Black tuxedo on white cardstock and color them with the mix of the greens, yellows, lavender and the brush marker, or the colors you like for the flowers, then cut them out with the coordinating dies and arrange them in front of the house on 3D foam pads to make more depth. Important to keep it only on the small flap otherwise it won't slide anymore!!!
Stamp the standing squirrel of the furry tailed set with Black Tuxedo on White cardstock and color it with the Rich Cocoa, then cut it out with the coordinating die and place it on a foam pad in front of the greenery. Take the sentiment from the Oak berry Cottage set and stamp it with the Black Tuxedo on the card. Take the Lavender Nuvo drops and put some on the Flowers and in the front. Take a sentiment from the paper collection and put it on foam pads and tape it on the bottom of the card.
Created By: Els Schutte
A Time to Remember
Save Project to My Library
Other Products: Brown Cardstock, Seam-binding, Scor-tape, Big-Shot, Silver Decoration, Glitter Beads, Small Buttons, Stapler, Thread, camera Stamp, Heat gun, Paper cutter, Ruler, Cutting knife, pencil
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.
Instructions: Click here to more photos for this project. Take 1 piece of the Brown Cardstock and cut it at 6 x 6 inches, this is the bottom of your album, make 4 strips of Brown cardstock : 2 1/4 x 6", 2 1/2 x 6", 2 3/4 x 6", 3 x 6". Score them on both long sides 1/2 inch in, fold them and put tape on 1 side of both flaps, do this on all 4 pieces. Take 1 cardstock and score it in half, turn it and score it in half again, now you have for squares on your paper. Take your ruler and cutting knife and cut in one of the scor lines till the center, cut on both sides of the scor lines so the opening is around 1/8 of an inch, do this with all 4 of the papers. Place your 6 x 6" paper in front of you on the table and tape the 2 1/4 x 6" strip on the upper part, tape it on the back, then the next strip of 2 1/2 x 6" goes on the right side, the 2 3/4 x 6" goes on the bottom part and the last one 3 x 6" goes on the left. Take your big sheets with the slit in it and tape them down on the flaps you just placed, tape the squares on the left side of the cutting!!! (I will place a photo on my blog), do this with all of the sheets. Fold all the pages in half and then double, now you can fold them in your book, start with the top one, this has the smallest spine, then the right side one then the bottom and then at last the left side.Take a ribbon and tape it on the front and back of the album. Now you can cover all of the cardstock in your album with design papers, front and backs, also the front and back of the album.
So, with all the new labels, tags, arrows and corner dies of this special launch you can decorate your album, I also put some white cardstock in it for photos but you can place photos anywhere you want! Stamp also some quotes with the new stamp sets! The album has place for 33 photos. On the front you put a strip of the paper collection, off center, then on both sides of that strip glue 2 other strips from the paper, on the left strip you can glue a silver decoration strip, then cut out a label with a new die and the paper collection and glue this half on top of the strips, also 2 corners of that paper with the new corner die, and cut a new tag also from the paper, pull a ribbon through and bind it with a thread.
Stamp the Flowers and leaves from the Oakberry Lane Blossom stamp using the Sweet Plum on white cardstock and cut them out with the coordinating die, then color the centers of the flowers with Buttercup and the rest of the flower with LuLu lavender, then the edges with Majestic Violet. The leaves you color with a mix of the greens and a little bit of the Rich Cocoa. Then put 1 layer of flowers in the 3D mold and spray them with a mist of water then add another layer of flowers and leaves and do the same, you can put 3 layers in the mold, now run them through your machine, place the flowers on your mat and press in the center so the flowers will pop up. Make holes in the centers and pull some flower stamens through, now put some glue on the flower with a sponge or glue bottle this is easy because of the fine tip, then sprinkle some shard glass in it. Place the flowers on the front of your album in a nice arrangement.
Stamp the Squirrels you like with the Black Ink and color them with Rich Cocoa and Toffee Crunch, take your Blender marker and color the little flowers with Cactus Flower. Cut them out with the coordinating dies and place them in between your flowers on the cover of your book.
Created By: Els Schutte
Popped Up Squirrels
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
Memento Dye Ink Pad - Rhubarb Stalk, TSMP301
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Memento Dye Ink Pad - Toffee Crunch, TSMP805
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Deluxe Flower Shaping Kit, HCST1-401
Regal Borders and Pockets Die, HCD1-779
Memento Dye Ink Pad - Lulu Lavender, TSMP504
Krystallos Shard Glass, 901
Brilliance Ink - Pearlescent Poppy, TSBL63
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Stack and Store Daubers-Pack of 30, HCDA2-450
Assorted Bead Stamens-Medium, HCS1-459-3
Ranger Archival Ink Pad - Buttercup, RACP632
Ranger Archival Ink Pad - Leaf Green, RACP436
Nuvo Crystal Drops Gloss - Sweet Lilac, NU668
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Oakberry Lane Antics Cling Stamp Set, HCPC-3841
Furry-Tailed Frolic Cling Stamp Set, HCPC-3839
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Lane Antics Die, HCD1-7199
Furry-Tailed Frolic Die, HCD1-7197
3D Blossoms Shaping Mold, HCFB1-469
Other Products: Big Shot, Foam pads, White cardstock
For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Cut a piece of white cardstock at 5 1/2 x 11 inches and score it and score and fold it on the long side at 5 1/2 inches, cut a piece of white cardstock at 5 1/4 x 10 1/2 score at 5 1/4 and fold this in half. Now measure from each side 1/2 inch in on the score line and make a mark, then go 1 inch up on both sides, 1/2 inch in again on both sides and 1 up on both sides, 1/2 inch in again and 1 up on both sides. (I will put the drawing on my Blog too). Now cut in both bottom 1 inch lines up then put your ruler at the end and fold the flap over the ruler, then make it really flat with your bone folder. Open the card and fold the flap inside and give it a good grease with your bone folder, now do the same with the next 1 inch up, cut it take your ruler and fold it again, open the card and fold this flap to the inside close the card and give it a good grease with your bone folder, do the same once more. Open the card now you have 3 stairs. Glue this piece in the other white card.
For the Inside of your card, cut 2 pieces of designer paper at 3/4 x 2 inches and 1 piece 3/4 x 3 inches. Ink the edges with Rich Cocoa and glue them on the stairs. Now stamp with the Rhubarb Stalk the Oakberry Blossoms, stamp several flowers (18) on white cardstock, cut them out with the coordinating die. Color the center of the flowers with Buttercup and the outside with the Pearlescent Poppy, put a dot of the lavender Nuvo drops in the center and let it dry. Stamp the Leaves from that set with the Rich Cocoa on white cardstock, color them with the mix of the greens and put some of the red color on the edges too, cut them out with the coordinating die. You don't have to shape these ones because they go on the inside of the card so they stay as flat as possible! Glue them all on the front of the 3 stairs in the card, also the leaves. Stamp 5 Squirrels you like with the Black Tuxedo, color them with a mix of Rich Cocoa and Toffee Crunch and cut them out with the coordinating dies and place 5 of them in between the flowers.
Cut a piece of paper from the paper pad at 5 x 5 inches, ink the edges and glue it on the front. Take a die from the Regal Borders and Pockets set and cut 1 out of white cardstock and glue this on the front of your album, cover it with glue and shard glass. Stamp the big flower from the Oakberry Lane Antics set with Tuxedo Black on white cardstock and cut it out with the coordinating die, then color the image with the same colors as the small flowers. Put some glue in the center and sprinkle some of the shard glass on it. Stamp some smaller flowers from the Oakberry blossom set and Rhubarb Stalk, cut them out with the die. Do the same with the leaves, stamp them with the Rich Cocoa and color them with a mix of Bamboo Leaves and Leaf Green ink. On the edge of the leaves you can add Pearlescent Poppy ink, cut them out with the coordinating die. Now put the flowers and the leaves in the 3D mold and spray them lightly with water and put the top on the mold and run it through your machine, make a hole in the center and pull a stamen through it. Now you can make a nice arrangement of the flowers on the front cover off your card, you still have 1 squirrel left so place him in between the flowers.
Created by: Els Schutte
Villa D'Squirrel
Save Project to My Library
Other Products: Light and Dark Brown Cardstock, Scor-tape, Big-Shot, Ice sticks, Card board, Ruler, Cutting knife, pencil, Moss, plastic acorns, Little stones, tiny resin rose, ladybug
For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Click here to view a larger photo of this project. Cut this Svg File out of the Cardstock and the paper collection papers, then glue it together as the instructions show you! Cut a piece of Cardboard for the garden, this one is 11 x 11 inches, cover the cardboard with Paper from the paper Collection. Take an empty spool from a tape roll and cover this, place this on the left upper corner of your garden, place the acorn on top of the spool, now it will stand. Take the 3 plastic acorns and cut off the bottom so that they get shorter, place them in front of the acorn like a step. Stamp with Jet Black and the Wildwood Cottage Stamp on White cardstock and color these with the Rich Cocoa, cut them out with the coordinating dies and glue the door and 2 windows on the acorn. Make a doorknob with the Nuvo drops. Use the Template (see my Blog) to cut out the shape for the bridge cut it out 2x and cut ice sticks at 2 inch and glue them on top of the bridge, now color the whole bridge with Rich Cocoa. Put some moss here and there, glue the little stones in a shape you like for a pond and fill it with a low layer of the 3D Crystal lacquer, let it dry, now stamp with Jet Black and the Woodsy Wonderland stamp some Greenery on White cardstock, color it with the bamboo Leaves and cut it out with the coordinating die, place them in the garden in front of the bridge, you can decorate it to your own wishes too.
Stamp the Flowers and leaves from the Oakberry Lane Blossom stamp with the Sweet Plum on White cardstock and cut them out with the coordinating die, then color the centers of the flowers with Buttercup and the rest of the flower with Cactus Flower. The leaves you color with a mix of the greens and a little bit of the Rich Cocoa and the pink. Then put 1 layer of flowers in the 3D mold and spray them with a mist of water then add another layer of flowers and leaves and do the same, you can put 3 layers in the mold, now run them through your machine, place the flowers on your mat and press in the center so the flowers will pop up. Make holes in the centers and pull some Flower stamens through, now put some glue on the flower with a sponge or glue bottle this is easy because of the fine tip, then sprinkle some shard glass in it.
Stamp the Squirrels with the Black Ink and color them with Rich Cocoa and Toffee Crunch, take your Blender marker and color the little flowers with Cactus Flower. Cut them out with the coordinating dies and place them in the garden, bridge, and roof, behind the Squirrels you can glue a piece of acetate so that they stand up very well.
Created By: Els Schutte
Christmas Floater
Save Project to My Library
Other Products: Gesso, Gray Cardstock, Scor tape,
For more tips on creating with the Merry and Bright collection, watch the tutorial at https://youtu.be/6bgO6epBuBI.
Instructions: Click here to view a larger photo of this project. Cut a piece of the Gray cardstock at 11 x 6" and put it on the Scor-pal and score at 1", 2 3/4", 3 3/4", 5 1/2", 7 1/4", 8 1/4", 10". Now make a mark on both sides of that line 1 inch in, then cut from mark till mark 1/8 wide. Put scor tape on both of the outside flaps on the good side, than fold all the score lines in. Cut a piece of the clear cardstock at 3 7/8 x 6", paste this on one of the taped flaps centered!!! Now stick the top piece of the acetate through the slit and then tape the other flap against the other part with the tape. Cut some pieces of the paper collection and decorate the card with this. Cut 2 images out of the paper collection of the same size and glue or tape them on the acetate 1 on both sides.
Stamp with Tuxedo Black some branches and pinecones from the Snowy pine village stamp set and from the Merry and Bright Accents on White Cardstock, color them with the Bamboo leaves and the Rich Cocoa, and cut them out with the coordinating dies, stamp with Tuxedo Black and the Merry and bright Accents the pearl string on White cardstock and color them with the teal Zeal and cut them out with the coordinating die, put some Nuvo drops on the string and let them dry! Now place some of the cutouts on the right top of the card, and on the left bottom of the card, make a nice composition, then put some gesso on some spots and put some glue on and sparkle some frosting powder on it and melt this with the heat tool.
Created By: Els Schutte
Bringing Home the Tree
Save Project to My Library
Other Products: Dowel, Gesso, Red Seam binding, Acrylic paint Copper, Silver Sticker sheet, White Cardstock, red cardstock, Black cardstock, Silver cardstock, Big Flat back Rhinestones, Pipe cleaners, Cutting Machine,Red Stickles, svg file https://www.simplycraftysvgs.com/shop/3d_designs/pickup-truck/
Click here to see how to put the truck together.
Instructions: Click here to view a larger photo of the truck. Cut out the Truck File with your Cutting Machine out of all the cardstock and Design Paper, you can also use a different color for your truck! See the Video how to put it together! Put some Clear cardstock in the windows if you like! Put some Flat back Rhine stones on your Mirrors and lights, and some Red stickles on your back lights. Cut the name Heartfelt Creations out of the paper and glue this on your License Plates
Take a piece of scratch cardstock and fold it double, now draw a half tree against the folding line you can make it as Long as you want, cut it out, if you unfold it you have a whole tree, place this tree on your design paper and cut 5 off them. Now fold them in half and glue them on top of each other, when you did the last one, now take your dowel, ink it with the Rich Cocoa and glue it in the center of your tree, now you can close your tree with glue. Ink all the edges with bamboo Leaves and it is ready to go in the back of the truck!
Take your Pipe Cleaner and make a circle of it, stamp with Rich Cocoa the Pinecone Branch from the Snowy Pine Village Stamps on White cardstock and Color them with bamboo leaves, Cut them out with the coordinating die and glue them down on the Pipe Cleaner Circle, Stamp some Pine cones with the Rich Cocoa and the Merry and bright Accent stamp on White Cardstock and Color them with Rich Cocoa and Sepia and cut them out with the coordinating die, Glue these on top of the Pine cone branches in a circle. Take your gesso and make some Pine cones white on 1 side, take a sponge and put some glue on it now dab this on your little wreath and sprinkle some Frosting powder on it and melt it with the heat tool. Glue the whole wreath on the hood of your car, make a nice bow and place this on top of the wreath. Ink all the edges of your car with Sepia and some Copper Acrylic paint. Enjoy The Ride!!!
Created By: Els Schutte
It's Clearly Christmas
Save Project to My Library
Other Products: Clear Cardstock 12x12, Red Ribbon, pearls on a string, Gesso, Glue Gun, Scrap Paper and Scissors for template.
For more tips on creating with the Merry and Bright collection, watch the tutorial at https://youtu.be/6bgO6epBuBI.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Click here to view a larger photo of this project. Take scrap paper and cut out a circle using a scissors or electronic die cutting machine. Cut it the size you want your wreath to be. Lay this circle template under your 12x12 clear cardstock, creating a template so you can see where to stamp your wreath, this will later be discarded. Take the Pine Branch from the Snowy Pine Village and stamp it on top of the clear cardstock several times, in a circle shape using Jet Black Stazon ink. This creates the base of your wreath.
Now stamp multiples of the following pieces on white cardstock to create the layers of your wreath. Stamp the Pine Branch using Rich Cocoa ink and die cut with coordinating die. Color with a mix of Bamboo Leaves and Leaf Green inks, and the stems with Rich Cocoa ink. Stamp the Pinecone with the Rich Cocoa, color it with a mix of Sepia and Rich Cocoa ink and die cut. Sponge some Gesso on one edge of each pine cone and let it dry. Stamp the Festive Holly leaves with the Jet Black ink, color them with the Bamboo Leaves and Leaf Green inks and die cut. Shape all of your pieces with the Deluxe Flower Shaping kit. Take your red Nuvo drops and place some dots on the spots where the berries are, allow to dry. When dry, put some glue on a sponge and sponge on the Holly Leaves and Berries then sprinkle some of the Frosting Powder on it and heat it with the heat tool.
Stamp multiples of the small poinsettias and holly leaves with Jet Black ink on white cardstock and color with Pearlescent Poppy ink, die cut and shape them with the 3D shaping Mold. Glue 2 on top of each other, make a hole in the center and add a stamen. Dab them with glue and sprinkle with the Frosting Powder, heat it with the heating tool.
Layer the shaped images along on top of the clear cardstock as desired. First adhere your pine branches on top of the wreath base, then add the pinecones, tucking them under the pine branches, followed by the Festive Holly leaves. Finally add the poinsettias, reserving one for the bow.
Make a nice red bow and glue this on top of the wreath, in the middle you can place a piece of the pearls on a string, and on top of that you place the last poinsettia.
Created By: Els Schutte
Christmas Cracker
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
Memento Dye Ink Pad - Rhubarb Stalk, TSMP301
Memento Dye Ink Pad - Teal Zeal, TSMP602
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Deluxe Flower Shaping Kit, HCST1-401
Sparkling Poinsettia Cling Stamp Set, HCPC-3680
Sparkling Poinsettia Die, HCD1-766
Scor-Pal Measuring & Scoring Board, 173842
Krystallos Shard Glass, 901
12 x 12 Cardstock Pack of 25 - White, HCPP3-452
Stack and Store Daubers-Pack of 6, HCDA1-449
Festive Holly & Cardinals Die, HCD1-7145
Festive Holly & Cardinals Cling Stamp Set, HCPC-3791
Heat It Craft Tool, RAHT
Bridal Bouquet Stamens-Small, HCS1-460
Ranger Archival Ink Pad - Jet Black, RACP468
Ranger Archival Ink Pad - Sepia, RACP505
Ranger Archival Ink Pad - Leaf Green, RACP436
Nuvo Crystal Drops - Rhubarb Crumble, NU679
Noel Ornament Die, HCD1-7188
Merry and Bright Accents Cling Stamp Set, HCPC-3838
Snowy Pine Village Cling Stamp Set, HCPC-3837
Merry and Bright Paper Collection, HCDP1-293
Merry and Bright Accents Die, HCD1-7196
Snowy Pine Village Die, HCD1-7195
Other Products: Light Blue Cardstock 12x12", White Ribbon, Gesso, Glue Gun, Gold Paper, Paper Cutter, Ruler, Pencil, Scissor, Bone folder, Brush
For more tips on creating with the Merry and Bright collection, watch the tutorial at https://youtu.be/6bgO6epBuBI.
Instructions: Click here to view a larger photo of this project. Take the 12 x 12" light blue sheet of cardstock and lay this on your scoring board, score at 2 1/2, 5, 7 1/2, 10 inches. Fold all the score lines like a harmonica, you'll have 1 inch left - this is your glue tab. Take your bone folder and press it really flat, then put marks on each corner at 1/2 inch, 1 3/4 inches and at 3 inch, then go 1 inch up on the 1 3/4 inch and draw a line, then you go to the 1/2 mark and connect them and also to the 3 inch mark and connect it then you have a V shape on each corner, you can cut them out, all 4 of them, (I will put a photo on my blog). Now unfold it and fold it back like a box and glue the ends together, let it dry and now close the ends with a ribbon, make a nice bow on it!
Take the pattern paper you like and cut at 2 1/4 x 6". Ink the edges with Teal Zeal Ink and glue them on the sides of your box. Cut a strip of gold paper at 3/4" wide and wrap it around the box. Take the Noel Ornament Die and die cut out of gold paper and glue this on top of the box, wrap the end over the edges off the box.
Stamp some Pine Branches from the Snowy Pine Village with Rich Cocoa on white cardstock. Color them with Bamboo Leaves ink and die cut with the coordinating die. Stamp some Pinecones from the Merry and Bright Accents with Rich Cocoa ink on white cardstock. Color them with Sepia and Rich Cocoa inks, die cut with the coordinating die. Stamp some Holly Leaves from the Festive Holly and Cardinals with Jet Black ink on white cardstock and color with the Bamboo Leaves and Leaf Green inks. Then put some Nuvo drops on the place where the berries are, let them dry.
Stamp the Sparkling Poinsettia with Rhubarb Stalk ink on white cardstock, die cut with the coordinating die. Color very lightly with the Cactus Flower ink at the edge a little bit darker. Shape with the Deluxe Flower Shaping kit. Glue 2 of each on top of each other and make a hole in the center and insert your stamens.
Now you can make a nice arrangement on top of the ornament die. Take your brush and put some gesso on top of the leaves, flowers and pine cones, you can also sponge it. Finally, take some glue and add that onto the flower, then sprinkle some of the Krystallos Shard Glass for a nice and shiny effect.
Created by: Els Schutte
Winter Wonderland
Save Project to My Library
Other Products: Grey Cardstock, Gesso, Glue gun, paper Cutter, Ruler, Pencil, Scissor, Bone folder, Brush
For more tips on creating with the Merry and Bright collection, watch the tutorial at https://youtu.be/6bgO6epBuBI.
Instructions: Click here to view more photos of this project. Cut a piece of Grey cardstock at 5 1/2 x 11 inches, score at 5 1/2 inches on the long side and fold. Cut a piece of Grey Cardstock 5 1/4 10 1/2 inches, score at 5 1/4 inches and fold. Now measure from each side 1/2 inch in on the score line and make a mark, then go 1 inch up on both sides, 1/2 inch in again on both sides and 1 up on both sides , 1/2 inch in again and 1 up on both sides. (I will put the drawing on my Blog too.) Now cut in both bottom 1 inch lines up then put your ruler at the end and fold the flap over the ruler, then make it really flat with your bone folder. Open the card and fold the flap inside and give it a good crease with your bone folder. Now do the same with the next 1 inch up, cut it, take your ruler and fold it again, open the card and fold this flap to the inside. Close the card and give it a good crease with your bone folder, do the same once more. Open the card, now you have 3 (stairs) Glue this piece in the other grey card. Cut a piece of Grey Cardstock at 2 x 12 inches and score at 3 x 8 5/8 inches and make it into a belly band
Stamp the Sparkling Poinsettias with Rhubarb Stalk on White Cardstock, cut them out with the coordinating die, color them very lightly with the Lady Bug, at the end a little bit darker, and shape them with your Deluxe Flower Shaping kit.Glue 2 of each on top of each other and put some glue in the center and add some prills to it. Glue also some Krystallos Glass in the flowers.
Stamp some Holly Clusters with Jet Black on White Cardstock and color with a mix of Bamboo Leaves and Leaf Green and cut them out with the ccoordinating die, make some berries on the clusters with the Nuvo drops, let ithem dry and take a sponge with glue and put this on top of the clusters and sprinkle some of the Frosting powder on it, melt this with the heat tool. Place the clusters on the Belly band, on top you can glue the Poinsettias. Stamp with Rich Cocoa some pinecones from the Merry and Bright Accent stamp set on White cardstock, color them with Sepia and Rich Cocoa and cut them out with the coordinating die put some white gesso on them, now you can glue them also on top of the band in between the flowers.
Cut a piece of paper with a nice image from the paper Collection for the front of your card and glue that down. For the Inside of your card, cut 2 pieces of Design paper at 3/4 x 2 inches and 1 piece 3/4 x 3 inches, Ink the edges with Teal Zeal and glue them on the Stairs.
Stamp the Word merry Christmas from the Silent Night Scroll set with Jet Black on White cardstock and color it with Bamboo Leaves, and Lady Bug and cut it out with the coordinating die, place some Nuvo drops on the place where the berries are and let them dry, Glue this on top of the stairs, use the winter wonderland name from the end of your paper and glue this on the top part of the stairs.
Cut our Snowy Village out of the paper collection with the die, cut it straight of at the bottom and glue this on the front of the first step, Now stamp 2 x the snowy village with Rich Cocoa on White cardstock and 2 x the trees of the Snowy Pine Village set and cut them out with the coordinating dies, color the doors and windows with the Rich Cocoa Ink and the Blender marker, color the trees with the bamboo Leaves. Glue one Village on the front of the second step, cut 2 Big trees loose and glue them along side the Village. Now cut the house and a few small trees off the next village so that is looks smaller and place this on the front of the third step.
Glue 2 trees on the small steps on both sides, now take a brush and gesso and make some white places in front of the houses and also make the trees, houses and banner white, take some glue on a sponge and put that also on the houses, trees and banner and sprinkle some of the Crystal Clear on it. In front of the houses you can also put some Seashell Nuvo crystal drops, make also some snowflakes with it for the bottom and back of your card. Let everything dry and then put the Belly band over your card to close it.
Created By: Els Schutte
We Wish You a Merry Christmas
Products Used
None, noneDesigner Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Deluxe Flower Shaping Kit, HCST1-401
Memento Dye Ink Pad - Lady Bug, TSMP300
Krystallos Shard Glass, 901
Brilliance Ink - Pearlescent Poppy, TSBL63
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Nuvo Crystal Drops - Red Berry, NU667
Stack and Store Daubers-Pack of 30, HCDA2-450
Rajni Chawla's Frosting Powder, PGM15016
Poinsettia & Holly Clusters Die, HCD1-7176
Poinsettia & Holly Clusters Cling Stamp Set, HCPC-3822
Heat It Craft Tool, RAHT
Assorted Bead Stamens-Medium, HCS1-459-3
3D Poinsettia Shaping Mold, HCFB1-463
Eyelet Lace Frames Die, HCD2-7192
Silent Night Scroll Cling Stamp Set, HCPC-3833
O Holy Night Paper Collection, HCDP1-292
Noel Ornament Die, HCD1-7188
Silent Night Scroll Die, HCD1-7186
Other Products: Red cardstock, Blue cardstock, Gold Cardstock Shiny, White Snowflake stickers le Suh, Shambala Beads Silver, Gold beads, red Ribbon, Gold paper, Black fine liner, Bling on the roll, Wire, Foam tape, Brilliance Graphite Black
For more tips on creating with the O Holy Night collection, watch the tutorial at https://youtu.be/UWDeK6soJ0E.
For more tips on creating with the flower shaping molds, watch the tutorialat https://youtu.be/FSdPL7nXvQE.
Instructions: Take a sheet of Red cardstock 12 x 12" for the base, take a light piece of Paper from the collection and cut this at 11 3/4 x 11 3/4" and glue this on top of the red cardstock. Now take a piece of Blue Cardstock and cut this at 8 x 11 3/4". Take a piece of gold paper and cut this at 7 x 11 3/4" and glue this on top of the Blue Cardstock in the center, then cut a piece of paper from the Collection at 6 x 11 3/4" and glue this on top of the Gold paper in the center.
Take a piece of wire and put the beads on it - start with 2 gold, 1 siver, 2 gold and so on, till you have the length you want. Now fold the top of the wire over the 3 pieces of paper you just glued down and secure it on the back with a piece of tape, now glue or tape the whole piece down on the first 2 papers.
Take the outside of the ornament die and cut I out of the blue cardstock, now cut the ornament of gold shiny cardstock and glue this on the blue ornament. Tape the whole ornament down with 3D foam on the bottom side of the wire with the beads. Make a nice red bow and glue this on top of the ornament.
Print you photo and mat this on Blue cardstock and then on the shiny Gold Cardstock, cut a frame with the eyelet Lace Frame die out of the Blue cardstock and cut 1 half off, glue this half under the frame on the left side. Tape this down on the left side of you layout. Take a strip of the Bling on the roll and glue this under the photo from left to right. Stick some snowflake stickers down, wherever you like.
Take the Poinsettia & Holly Cluster stamp and your Graphite Black Ink and stamp some of the poinsettias and the clusters on White Cardstock, color the Poinsettia with a mix of the lady bug and Pearlescent poppy, and the clusters with Bamboo leaves, then take the Nuvo drops Red berry and put them where the berries are, let them dry Cut them all out with the coordinating dies and shape them with the 3D Poinsettia mold, the clusters you shape on your mat from the shaping kit.
Take some Glue on a sponge and tip the ends of the Clusters and sprinkle some frosting powder on them and melt it with the heat tool. Make a hole in the center of the poinsettia and put a stamen through, now tip some Glue in the center and sprinkle some of the Shard glass on it, let it dry. When all the flowers and leaves are dry you can place them on the left upper corner of the photo and under the bow on your ornament.
Stamp with the Graphite Black and the word stamp from the Silent Night scroll stamp on white cardstock and cut it out with the connected die and color it with the lady bug, then cut it again from the gold shiny cardstock and glue this under the red word as a shadow and stick it down under the photo. Take a Black Fine liner and doodle a little bit next to the edge of the whole layout.
Created by: Els Schutte
Blazing Poppy on Ice
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
Tombow Dual Brush Marker N00 Blender, 282873
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Memento Dye Ink Pad - Peanut Brittle, TSMP802
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Deluxe Flower Shaping Kit, HCST1-401
Blazing Poppy Petals Cling Stamp Set, HCPC-3674
Blazing Poppy Die, HCD1-764
Memento Dye Ink Pad - Lady Bug, TSMP300
Krystallos Shard Glass, 901
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Nuvo Crystal Drops - Red Berry, NU667
Stack and Store Daubers-Pack of 30, HCDA2-450
Rajni Chawla's Frosting Powder, PGM15016
Festive Holly & Cardinals Die, HCD1-7145
Festive Holly & Cardinals Cling Stamp Set, HCPC-3791
Poinsettia & Holly Clusters Die, HCD1-7176
Poinsettia & Holly Clusters Cling Stamp Set, HCPC-3822
Heat It Craft Tool, RAHT
Assorted Pearl Stamens-Small, HCS1-459-1
3D Poinsettia Shaping Mold, HCFB1-463
3D Floral Basics Shaping Mold, HCFB1-464
Noel Sentiments Cling Stamp Set, HCPC-3834
Silent Night Scroll Cling Stamp Set, HCPC-3833
O Holy Night Paper Collection, HCDP1-292
Silent Night Scroll Die, HCD1-7186
Other Products: Cream Cardstock, Cutting Die Ice skates silhouette Store #39157, Rope, 3D foam pads, Black Fine liner, Paperclip, Scallop circle punch, Distress Ink Vintage photo, Brown Marker, Silver Marker,
For more tips on creating with the O Holy Night collection, watch the tutorial at https://youtu.be/UWDeK6soJ0E.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Cut a piece of cream cardstock at 8 1/2 x 5 1/2" and score this at 1/2 and 3/4 inch, fold the score lines. Cut another piece of cream cardstock to 7 1/2 x 5 1/2" and glue this on the 1/2" flap from the other part. Cut a piece of green designer paper from the collection at 5 1/4 x 7 1/4". Ink the edges with Vintage Photo and glue this on the front of the card. Cut a piece of light cream designer paper from the collection at 7 1/8 x 5 1/8". Ink the edges and glue this on top of the green one, take the black fine liner and make small stich lines around the edge. Cut the Ice skates here with your Silhouette machine and assemble. Color the bottom part of the skate brown and the steel part silver using markers. Make holes in the skate for the laces and get the rope through those holes, then get the fine liner and make little stitches on the shoe. Ink the edges of the shoe with Vintage Photo. Adhere using 3D foam pads.
Stamp the Silent Night Scroll stamp on White cardstock using Tuxedo Black ink and die cut with the coordinating die. Color the holly with the blender and Bamboo Leaves ink, and the flame with Peanut Brittle ink. Ink the background and edges with Vintage Photo ink, and adhere this on top of the skates, then curl the edges of the scroll a little bit. Stamp two Pinecones, the Merry Christmas sentiment with the bow on white cardstock using Tuxedo Black ink, die cut with coordinating die. Stamp the holly using Bamboo Leaves ink, and the other Merry Christmas sentiment with Vintage Photo ink and die cut images with coordinating dies. Color the bow with Lady Bug ink and the pine cones with Rich Cocoa and Bamboo Leaves, the holly with Bamboo Leaves ink. Take the Nuvo drops Red Berry and apply dots on the berries, allow to dry.
Stamp Blazing Poppy and 4 poinsettias on white cardstock using black ink and die cut. Color the centers of poppies very lightly using the daubers with Peanut Brittle ink, then color the edges with the Lady Bug ink. Color poinsettias with Lady Bug ink. Shape the poppies with the Basic Shaping mold and the poinsettias with the coordinating mold. You can see Emma Lou's video above for more instructions about using the mold. Pierce the center of flowers and insert stamens.
Assemble pieces as shown. Finally add Krystallos shard glass onto poinsettias and Frosting Powder onto poppy and on the rest of card as shown.
Created by: Els Schutte
Let it Snow
Save Project to My Library
Other Products: Acrylic Ball 5 Inch, Tape roll empty, White Ribbon, Snowflake Stickers, Doily, Cardboard Circle, Glue gun, Fake snow, Vintage Photo Distress Ink, White Glitter cardstock,
For more tips on creating with the O Holy Night collection, watch the tutorial at https://youtu.be/UWDeK6soJ0E.
For more tips on creating with the flower shaping molds, watch the tutorialat https://youtu.be/FSdPL7nXvQE.
Instructions: Click here for a larger photo of this project. Take a cardboard Circle of 6 inch and cover it with paper from the collection, on top of that glue a doily. Take the empty tape roll and cover it on the out and in side with paper from the collection. Cut a shape out of the white glitter cardstock with the ornament die, stamp a sentiment with Tuxedo Black Ink on white cardstock, cut it out with the die and glue this on top of the ornament, Ink the edges with the Vintage Photo and glue this on the front of the Tape roll. Glue this on top of the doily.
Cut 6 ornaments with the ornament die out of white glitter paper, fold them in half and glue them together as a circle, before you close the circle glue a piece of wire in the middle. Take the Acrylic ball and open it put some fake snow in it and then hang the ornament in it and make sure the wire sticks out, then you can close the ball.Glue the ball on the empty tape roll, take some Snow flake stickers and stick them on the ball. Make a big bow with the ribbon and glue this on top of the ball.
Stamp with Tuxedo Black the Poinsettia & Holly stamps and the Holly & Cardinals stamp on White Cardstock, color them with Bamboo Leaves and Lady Bug, cut them out with the coordinating dies, shape the poinsettias with the 3D poinsettia mold and glue 2 of them on top of each other, make a hole in the center and pull a stamen through it. Make some Berries on the Holly with the Nuvo Drops and let them dry, then put some Glue on the leaves and Flowers and sprinkle some Frosting powder on it and melt it with the heat tool. Glue the Holly and Flowers on top and on the bottom of the Snow globe.
Created By: Els Schutte
The Nativity
Save Project to My Library
Other Products: Gesso, Cardboard, Dowel 11 inch, Acetate, Styropur Ball, Christmas star (own stash), Ball chain, Bell, Stone mold, Plaster, Brown decoration sand, moss, Green Cardstock, 2 Silver beads, Wire, Rope, Acrylic paint: White, Ochre, Brown, Red, Brush, Crop-a-dile, Glue gun, Black cardstock, sookwang tape, Craft knife, Foam dots, Brilliance Ink Graphite Black
For more tips on creating with the O Holy Night collection, watch the tutorial at https://youtu.be/UWDeK6soJ0E.
Instructions: Click here to view a larger photo of this project. Cut the following pieces of Grey Cardboard: Bottom 15L x 51/2"H - Front 7W x 6 1/2"H - Right side 1 1/2W x 6"H - Left side 3 1/2W x 4 1/4"H - Back 5W x 4 1/4H - Tower: 4 x 3W x 8"H - Bottom Roof 1 x 3 3/4 x3 3/4" and Upper roof 1 x 3 1/2 x 3 1/2". House Right: Front 4W - 5"H - Back 4W x 5"h - Side 2W x 5"H. Cut 1 x 12 inch strips of Black cardstock and score them in Half so 1/2inch on both sides, then fold them in half and put scor tape on 1 side on both 1/2 inch sides, these are called connection strips. On my blog you will find the front opening pattern http://elsschutte.blogspot.ca/p/heartfelt-creations.html, put this on the front piece of the house and cut it out with a craft knife!
First we start with the Tower, put them together with the connection strips, then glue the big roof part flat on top of the tower, on top of that you glue the smaller roof part, cut the styropur ball in half and glue this on top of the roof, take a piece of rope and glue this around the ball. Take the front piece where you cut the arch out and take the right side piece, and put them together with a connection strip, put a connection strip on the end of the side too and connect this with the tower 1 inch from the right side! Now take the left side and connect this with a strip on the front and then connect the back to that and connect it to the tower! For the right house take the front and cut the door opening out (use this for the door) and connect front, side, back to each other with the strips and connect them to the tower. For the roof, cut a piece of cardboard of 4 1/2 x 3" and glue this on top of the right house, cut some 1.4 inch strips and glue them on top of the roof for decoration. For the big roof you have to measure your own house it depends on the thickness of your cardboard! For the right fence, cut a piece of 4 1/2 x 1 1/2 and glue this against the house. Now take a piece of scrap and glue this on top of it.
Now take the arch you cut out of the right house and cut it in half then you have 2 doors, cut pieces of cardboard and glue them on top of the door like planks, put them in place with connection strips, cut a piece of 4 1/4 x 1 1/4" for the left fence and decorate it with 1/2 inch strips. Cut strips 1/4 inch wide and different sizes long for (stones) above the door, arch and wall spaces, glue them down all uneven, Now glue the whole house down on the bottom plate and paint the whole house 2 times with white Gesso and let it dry, when it is dry you can paint it with a mix of White, Yellow Ochre, red and brown. Paint the doors with brown paint and also the edges of the house
Make some stones with plaster and a stone mold or take some out of your garden, glue them in the corner of the house in front of the tower paint them also with gesso and the acrylic paint and decorate it with brown decorative sand. Take 2 beads and fill them with Green paper grass and put them in front of the Arch.
Take Green Cardstock and make 16 strips of 1 1/2 x 5 inches then take a piece of wire and glue this in between 2 pieces of the cardstock then cut out a leave and cut fringes till the wire (See photo on blog) Take the dowel and cover it with rope, glue the dowel down on the left side of the house behind the fence and now you can bend the leaves and glue them on top of the dowel, put also some green paper grass on the bottom of the tree.
Stamp the Images from the O holy night stamp with tuxedo Black on White cardstock stamp them a few times for a 3D effect. Color them with the Brush Marker in the colors you like and cut them out with the coordinating dies, cut some extra pieces and put them on each other with the foam dots. Glue a piece of acetate behind the Images and glue them in place and decorate them with the moss. Glue acetate behind the angels and glue them on top of the arch and roof and decorate them with glue and Crystal Clear. Make a hole with the crop-a-dile in one of the roof pieces and put a ball chain and a bell through it. Last but not least stick a star on top of the Ball and your piece is ready for Christmas.
Bee Special
Save Project to My Library
Other Products: Cream Cardstock, Orange Cardstock, Black Cardstock, Decorative Sand, Image Bee Copple Lynne Anzelc, Straws, Pearl String, Black Marker, Foam Pads, Distress Ink Peeled Paint, Distress Ink Vintage Photo, Big Shot, Water Spray Bottle, VersaMark, Brilliance Graphite Black, Scissors
For more tips on creating with the Sweet as Honey collection, watch the tutorial at https://youtu.be/89nlTDw3kOE
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Cut a piece of cream cardstock at 5 1/2 x 7 1/2 inches and 1 piece at 5/1/2 x 8 1/2 inches. Score this piece with the long side up at 7 1/2 inches and 7 3/4 inches and fold these lines. The end piece is 1/2 inch, glue the piece that's 7 1/2 inch on the 1/2 inch piece flap, now you have a double card of 5 1/2 x 7 1/2 inches. Take your Intricate Swirl Frame die and cut this one out of orange cardstock and glue this on the front of your card. Take 2 straws and cut them in 3 different lengths and glue them on top of the card next to each other.
Stamp the large and small peony with the Morocco ink on white cardstock. Cut them out with the coordinating dies, color the large ones with Peanut Brittle in the center and very light Tangelo on the outside. For the small ones, use the Peanut Brittle in the center and the Buttercup Yellow on the outside. Lay them in the Flower Basic Shaping Mold, stamped side down and spray them lightly with water, then you can do another layer on top of that and spray them again, do the next layer and spray them, you can do 3 layers at the same time! Run them through your machine and shape them further with your Deluxe Flower Shaping Kit. I used 3 smaller and 3 bigger petals for the big peony. Shape the 3 smaller ones with the stamped side down, and the 3 bigger ones with the stamped side up side up, glue them all on top of each other, make a hole in the center and put your stamens through - use 8 stamens for the big flower and fold them double. Use 1 bigger stamen for the smallest peony, make 5 of them.
Stamp the coneflower from the Blossoming Coneflower set and the Backyard Blossoms set and the Garden Edge Coneflower with Rich Cocoa on white cardstock. Color them on top with Tangelo and then Sunflower Yellow and a mix of Buttercup and blend these, put some glue on the top and sprinkle the decorative sand on it for the pollen. Stamp the tiny long flowers from the Backyard Blossom set with the Rich Cocoa and color them with the Sunflower yellow and the Leaf Green, cut them out with the coordinating die.
Stamp the Rose Vines and the Leafy accents with the Rich Cocoa on White cardstock, color them with a mix of New Sprout, Leaf Green and Distress Peeled paint, cut them out with the coordinating dies and shape them with the Deluxe shaping kit. For the Leafy accent you can use the Leafy accent mold to shape your leaves.
Stamp the Lush Lilac flowers with Versamark on vellum, sprinkle gold embossing powder over it and melt this with the heating tool, then cut them out with the coordinating die. Place them on your shaping mat and just press them in the middle, put some dots in the center with the Nuvo Dandelion Yellow.
Stamp the bees from the Sweet as Honey set with the Graphite Black on white cardstock and cut them out with the coordinating die then color the body with Sunflower Yellow, Buttercup and Peanut Brittle. Take your black marker and make the black stripes on the body and add some Crystal Lacquer on the wings.
Cut out the image of the bee with a scissors and add Shard Glass on top of it. Cut 2 black stamens in half and glue them behind the heads like an antenna. Glue the large peony in the center and then start to make a nice composition with all the flowers you have made, cut some leaves and flowers apart and adhere them in between the other flowers. Glue the bee image on top of the large peony and add the small bees on some flowers. Glue some pieces of the string pearls in between the flowers too. Cut out a sentiment from the paper collection, mat on black cardstock with foam pads and adhere this on the right, upper corner.
Created By: Els Schutte
Hey friend how's your weekend going?
Are you looking for a new crafty project... we have a fabulous tutorial for you today that is perfect for so many occasions! Let us know what occasion you would make this for we are thinking a wedding and a Christening for sure! Adding pockets inside your projects lets you add that personal touch including photo's and messages to your loved ones, plus of course they are great to add gift cards in too!
Our Crafters Say:
"I have NEVER ever been disappointed with Heartfelts product or customer service.... by far the most delightful company to deal with. The products are of the finest quality and unique and beautiful designs." -April C
"Your products are my favorite because of the great quality and beauty they provide." -Charlene B
"My order always arrives in pristine condition, and any questions I have are quickly and expertly answered. Heartfelt Creations is the gold standard in every way--ingenuity of product, great quality, fantastic video tutorials, the best Design Team in the industry, and the ease of putting together wonderful cards with everything that works so well together, plus my past purchases are still well-loved and well-used, and I can incorporate the old with the new in Heartfelt Creations products--what more could any crafter want?!" -Joanne L
Let's get started and have some crafty fun together.
Directions:
Step 1: Cut a piece of white cardstock 7 1/2" H x 11 1/4" W. Score this at 5 1/2" and 5 3/4", fold the score lines and you will have a card 5 1/2 x 7 1/2". Take a piece of patterned paper from the Sweet as Honey paper collection and diecut using the Intricate Swirls Frames Die. Ink the edges and adhere it to the front of the card with Dries Clear Adhesive.
Step 2: Stamp the image from the Classic Rose Vines Cling Stamp Set on the front of the card using VersaMark Ink. Sprinkle with white embossing powder and heat set using the Heat It tool.
Step 3: Cut two pieces from the paper collection 5 1/4 x 7 1/4" each. Round the corners as shown. Ink the edges with distress Ink and glue them inside the card.
Step 4: Cut a piece of white cardstock at 7 1/2 x 4 1/2", lay your Regal Border die at the edge and run it through your die cutting machine, put glue on the sides and bottom and glue it on the left side of your card, this will be your left pocket. Cut a piece of white cardstock at 5 1/4 x 4" and make another pocket for the right side.
Step 5: Cut three straws in three different sizes, glue them on top of the card and adhere some tulle on top of the straws.
Step 6: Stamp the Large Peony with Peanut Brittle ink seven times on white cardstock and cut them out with the coordinating die. Color them with the Archival Cactus Flower very lightly in the center and on the edges, then place them in the 3D Flower shaping mold, spray them lightly with water and run them through the die cutting machine. Finish shaping them with the Deluxe Flower Shaping Kit.
Step 7: Shape four of them with the ink on the outside and three with the ink on the inside. Glue them all together making sure to offset the petals. Pierce a hole in the center and add the Bridal Bouquet stamens. Stamp three of the small peonies and color and shape them in the same way as the large ones.
Step 8: Stamp the Leafy Accent stamp two times on white cardstock using Rich Cocoa ink. Color the leaves with new Sprout and Bamboo Leaves, diecut them with the coordinating die and shape them in the Leafy Accent Mold. Ink the edges of the leaves with Cactus Flower.
Step 9: Stamp the Backyard Blossoms stamp on white cardstock two times using Rich Cocoa ink. Color the images with Cactus Flower and Bamboo Leaves ink and cut them out with the coordinating die.
Step 10: Stamp the Lush Lilac with Teal Zeal on white cardstock and color with New Sprout and Teal Zeal. Cut them out with the coordinating die and shape them with the Lush Lilac 3D shaping mold. Then place them on your shaping mat and press down in the center.
Step 11: Stamp the doves from the Flowering Dogwood collection on white cardstock with the Brilliance Graphite Black ink and cut them out with the coordinating die. Give them a soft color with the Dove Blender pen and put some glue on the wings with a sponge and sprinkle some Shard Glass on that. Glue two of them on the front of your card on top of the straws and tulle. Take a section of the leaves and glue that under the birds, then take the Large Peony and glue that down. Add the three smaller peonies and then the Lilacs, making a nice arrangement with all your flowers and leaves.
Step 12: Sponge the edges of the flowers with Dries Clear Adhesive and sprinkle with Crystal Clear Glitter.
Step 13: Add Nuvo Wedgewood Blue Crystal drops to the centers of the lilacs and to the card base as shown.
Step 14: Place the third Dove on the inside of the card with some flowers.
Have fun making lots of these for your friends and family.
We love to see what you make so make sure you share your projects with us over on our Facebook page here https://www.facebook.com/HeartfeltCreations
Tutorial by designer Els Schutte
Other Supplies: Two Paper Straws, Hot Glue Gun, Scor Tape, Corner Rounder, Big Shot, VersaMark, Tulle, Nuvo Crystal Drops Wedgewood Blue, Brilliance Ink Graphite Black
Heartfelt Creations Supplies:
Floral Parcel Post
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
3-D Crystal Lacquer, 3D1844
Memento Dye Ink Pad - Teal Zeal, TSMP602
Memento Dye Ink Pad - New Sprout, TSMP704
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Memento Dye Ink Pad - Potter's Clay, TSMP801
Memento Dye Ink Pad - Peanut Brittle, TSMP802
Deluxe Flower Shaping Kit, HCST1-401
Krystallos Shard Glass, 901
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Stack and Store Daubers-Pack of 30, HCDA2-450
Rajni Chawla's Crystal Clear, PGM15015
Brilliance Ink - Sunflower Yellow, TSBL11
3D Floral Basics Shaping Mold, HCFB1-464
Large Sweet Peony Cling Stamp Set, HCPC-3820
Small Sweet Peony Cling Stamp Set, HCPC-3819
Large Sweet Peony Die, HCD1-7174
Small Sweet Peony Die, HCD1-7173
Ranger Archival Ink Pad - Vibrant Fuchsia, RACP524
Ranger Archival Ink Pad - Buttercup, RACP632
Ranger Archival Ink Pad - Leaf Green, RACP436
Leafy Accents Die, HCD1-7193
3D Leafy Accents Shaping Mold, HCFB1-467
Nuvo Crystal Drops - Neptune Turquoise, NU661
Nuvo Crystal Drops - Ivory Seashell , NU675
Garden's Edge Coneflower Cling Stamp Set, HCPC-3828
Backyard Blossoms Cling Stamp Set, HCPC-3827
Blossoming Coneflower Cling Stamp Set, HCPC-3826
Garden's Edge Coneflower Die, HCD1-7182
Backyard Blossoms Die, HCD1-7181
Blossoming Coneflower Die, HCD1-7180
Sweet as Honey Paper Collection, HCDP1-291
Leafy Accents Cling Stamp Set, HCPC-3835
Other Products: Gesso, Hot glue Gun, Distress Ink Vintage Photo, Decorative sand, Corner rounder, Foam pads, Cream Cardstock, Scor tape, ruler, pencil, score tool, Envelope Punch board, Brilliance Graphite Black, Memento Morocco
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
To see how to shape the peony, watch the video at https://youtu.be/L9_MLkvpGPQ.
Instructions: Cut a piece of Creme cardstock at 8 x 8 inch and put a mark on the top of the paper on 4 sides at 4 inches, 4 3/4 inches, 5 1/2 inches then score 3 sides of the paper from mark till mark. I will put step by step photos on my blog here. Fold all the score lines, cut some pieces out and make 2 tabs for gluing the box together. You can round some corners with an envelope punch board, but you don't have too. Cut some paper from the paper collection and mat the box on the inside and front, now fold a piece of the Cream cardstock double and put your envelope on top of it against the fold then take a pencil and draw the envelope on the paper, cut it out and glue this behind your envelope, so you can use this as a card. Ink all the edges with the Vintage photo.
Stamp the Coneflower from the Blossoming Coneflower set, the Backyard Blossoms set and the Garden Edge Cone flower with Rich Cocoa on white cardstock. Color them on top with Tangelo and then Sunflower yellow and a mix of Buttercup and blend this in each other, the other coneflowers are colored with Vibrant Fuchsia. Put some glue on the tops and sprinkle the decorative sand on them for the pollen.
Stamp the Tiny Long flowers from the Backyard Blossom set with the Rich Cocoa and color them with Teal Zeal and the Leaf Green, cut them out with the coordinating dies. Stamp the sweet peonies on white cardstock with potter's clay ink, color with morocco and peanut brittle and cut them out with coordinating dies. Place the petals in the flower shaping mold, mist with water and and run through the die cutting machine. Finish shaping with the Deluxe Flower Shaping Kit.
Now stamp the Leafy accents on white Cardstock with Graphite Black, color them with a mix of greens and on top some Vintage Photo, cut them out with the connecting die and put them up side down in the Shaping mold spray them lightly with water put the top on the mold and run it through your machine.
If all your flowers are done and dry you can glue them on your envelope. Start with the inside and put some coneflowers there, then move on to the front and make a nice arrangement with all the flowers. On the long Blue Backyard flowers, put some dots with the Nuvo Crystal drops and also a little bit in between the flowers. Using dries clear glue, add glitter to the flowers. Cut out a sentiment label from the paper collection and glue this on the right bottom corner, now take some white gesso and give the whole envelope card a white wash.
Created by: Els Schutte
Just Hangin' With the Bees
Save Project to My Library
Other Products: Canvas 10 x 12 inch, Embossing powder Clear, Honey Stick, yellow Ribbon, Gesso, Cardboard, Hot glue Gun, Yellow cardstock, Distress Ink Vintage Photo, Decorative sand, Heat tool, VersaMark, spellbinder label dies, Brilliance Graphite Black
To see how to shape the peony, watch the video at https://youtu.be/L9_MLkvpGPQ.
For more tips on creating with the Sweet as Honey collection, watch the tutorial at https://youtu.be/89nlTDw3kOE.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Cut a piece of cardboard at 10 x 12 inch and make a frame of 1 3/8 inches all the way round, cover this with cream cardstock, take the Honey comb stamp from the sweet as Honey set and stamp it with Versamark Ink and sprinkle the Clear Embossing powder over it and melt it with the Heat tool, do this all the way round on the frame then go over it with Vintage photo Ink.
Cut a piece of paper from the collection in the size of your frame and glue it in the back of the canvas, now put some glue and Crystal clear on the wings of the bees. If you have a photo, mat it on a piece of yellow cardstock and glue this on top of the paper, you can also use a die to cut a shape. Now glue the frame on the Canvas so it looks like a shadow box.
Stamp the Coneflower from the Blossoming coneflower set and the backyard Blossoms set and the Garden Edge Cone flower with Rich Cocoa on white cardstock. Color them on top with Tangelo and then Sunflower yellow and a mix of Buttercup and blend this in each other, put some glue on the top and sprinkle the decorative sand on it for the pollen. Stamp the tiny long flowers from the Backyard Blossom set with the Rich Cocoa and color them with a mix of yellows and the Leaf Green, cut them out with the coordinating dies. Stamp the sweet peonies on white cardstock with potter's clay ink, color with morocco, and peanut brittle and cut them out with coordinating dies. Place the petals in the flower shaping mold, mist with water and and run through the die cutting machine. Finish shaping with the Deluxe Flower Shaping Kit. Take the Honey comb cutting die and put it on the same paper of the collection and cut some pieces out, glue 2 pieces of them on the left upper corner, glue a real Honey Stick on it and make a nice bow with the yellow ribbon.
Stamp with the Graphite Black some bees and cut them out with the coordinating die, then color them with a mix of the yellows and make the stripes black with a marker, put some glue on the wings and sprinkle some of the Crystal Clear on it and let it dry.
Now you can make a nice arrangement with all the flowers you made on the right bottom, cut a honeycomb out of the paper collection with a big die from the Sweet as honey collection, ink the edges, take your sentiment stamp also from that collection and stamp a sentiment on it and Glue it down on the top right corner, put a bee on top, too. Now take some gesso and make it thinner with water and give the whole thing a white wash, make with the Nuvo drops some drops on the long flowers and on the frame and done, ready to put it on your wall.
Created By: Els Schutte
A Buzzing Cottage
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
3-D Crystal Lacquer, 3D1844
Memento Dye Ink Pad - New Sprout, TSMP704
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Memento Dye Ink Pad - Potter's Clay, TSMP801
Memento Dye Ink Pad - Peanut Brittle, TSMP802
Memento Dye Ink Pad - Tangelo, TSMP200
Memento Dye Ink Pad - Morocco, TSMP201
Deluxe Flower Shaping Kit, HCST1-401
Krystallos Shard Glass, 901
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Stack and Store Daubers-Pack of 30, HCDA2-450
Brilliance Ink - Sunflower Yellow, TSBL11
Ranger Archival Ink Pad - Vibrant Fuchsia, RACP524
Ranger Archival Ink Pad - Buttercup, RACP632
Ranger Archival Ink Pad - Leaf Green, RACP436
Garden's Edge Coneflower Cling Stamp Set, HCPC-3828
Backyard Blossoms Cling Stamp Set, HCPC-3827
Blossoming Coneflower Cling Stamp Set, HCPC-3826
Garden's Edge Coneflower Die, HCD1-7182
Backyard Blossoms Die, HCD1-7181
Blossoming Coneflower Die, HCD1-7180
Sweet as Honey Paper Collection, HCDP1-291
Other Products: Cardstock: Blue/Green, yellow, red, Grey, and Green, Velvet Ribbon, Decorative sand, Black marker, Foam pads, Distress ink Vintage Photo, Silhouette Cameo, Glue gun, Dowel, icicle sticks, acetate, Button deer, Christmas light, Crystals, straw SVG File House, buttons, beads, Packing material
For more tips on creating with the Sweet as Honey collection, watch the tutorial at https://youtu.be/89nlTDw3kOE.
Instructions: Click here to see a larger photo of this project. Cut this SVG file of the house in any color you like! Put it together as the instructions will tell you, ink all the edges with the Vintage photo distress Ink to make it distressed. Then I used a piece of Packing material for the bottom, you can take a piece of flat Cardboard and wrap this in Green cardstock, cut a piece of the paper collection and glue this on top of the bottom, then place your house on top of it a little bit offset. Make a fence with the icicle sticks and Ink them with the Distress Ink. Cut a piece of a straw and Ink that too then glue it to the side of the house like a downspout, then you glue the fence to that so it will stand, on the right side behind the fence you can glue a dowel and on top of that place a wooden button, cut out a sentiment from the paper collection and glue this on the dowel.
Cut 3 bees from the paper collection and the Honey pot, put some 3D Crystal Lacquer on the wings and on the pot on the wings you can sprinkle some of the shard glass. Make a table with a wooden bead and a button on top and do the same for the seats but smaller, when the bees and the pot are dry put a piece of acetate on the back of them and glue them on the table and seats, place this in the garden. Put the other bee on a piece of acetate and glue him in front of the top window and decorate it with some green to hide the acetate. Use an old piece of a miniature Christmas light string (dollarstore) and cut 1 light off and glue that next to the door.
Stamp the Coneflower from the Blossoming coneflower set and the backyard Blossoms set and the Garden Edge Cone flower with Rich Cocoa on white cardstock, color them on top with Tangelo and then Sunflower yellow and a mix of Buttercup and blend this in each other, put some glue on the top and sprinkle the decorative sand on it for the pollen. Stamp the Tiny Long flowers from the Backyard Blossom set with the Rich Cocoa and color them with the Vibrant Fuchsia and the Leaf Green, cut them out with the coordinating dies. Place all the flowers in front of the fence and glue them to the fence, in front you can put some miniature train green, the pink flowers you can put them on the left side of the house, put some green in front of it and put the deer Button in front of it. Make a path with some decorative stones and you're done!
Created by: Els Schutte
Golden Coneflowers
Save Project to My Library
Other Products: Big shot, Foam pads, Gold glitter cardstock, Straws, Polka dot white ribbon, gold cord, White cardstock, gold Ink Colorbox, Corner rounder, Polka dot embossing folder Darice, Foamboard, Gold cardstock, Versamark.
For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.
Instructions: Cut a piece of White cardstock at 6 1/2 x 10" and score in half at 5", then cut a piece of gold glitter cardstock at 4 1/2 x 6" and glue this on top of the card, cut a piece of White cardstock at 4 x 5 1/2" and put that in the embossing folder and run it through your machine, put a layer of Foam board behind it to make it dimensional then put this on top of the gold Cardstock.
Stamp the coneflowers with VersaMark and put some gold embossing powder over it then melt it with the heat tool. Now cut them out with the coordinating dies. Glue the biggest coneflower on top of the card, then cut the straws in 3 different lengths and glue them on top of the flower, then on top of the straws you glue the smaller coneflower.
Cut out a tag with the tag die and stamp with the Heartfelt Love Sentiments stamp and gold ink then ink the edges with gold ink and pull a little piece of the ribbon through the hole and bind it together with a gold piece of cord. Glue the tag on the bottom part of the card on top of the flower.
Created By: Els Schutte
Sparkling Blossoms
Save Project to My Library
Other Products: Miniature train sands, Pearl pen yellow, Distress Ink Vintage photo, Glue gun, Big shot, Glue, Foam pads, staples, Purple cardstock, Purple glitter cardstock, Distresser, Purple Seam binding, Distress Ink Dusty Concord
For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.
Instructions: Cut a piece of Purple cardstock 10 x 7 inches, score it on 5" and fold it in half, then your card is 5 x 7 inches Cut a piece of the glitter cardstock at 4 3/4 x 6 3/4 inches and glue this on the front of the card. Take a piece of the design paper collection 4 1/2 x 6 1/2 inches, the one with the Purple Coneflowers on the left and cut next to the flowers leaving the bottom part straight, now take the distresser and distress all the sides and ink them with Vintage Photo, now only put some tape on the outside and glue the whole part down on the front of the card so then you have a pocket.
For the inside of the card you cut 2 pieces of the design paper 4 3/4 x 6 1/2 inches, distress all the edges and ink them with the vintage photo. For the left side you cut a tag out of the paper and mat it on a purple cardstock and cut it out so that you have a nice frame behind the tag, cut a strip from the design paper and glue this on the left side put tape on the tag only on 2 sides so that you create a pocket, now cut another tag out of the paper, mat it on cardstock take a piece of the seam binding and staple it on the tag, put this one in the pocket. For the right side you cut with a knife a slit into the paper, make 2 little holes with the Crop-o-dile and then cut a from hole to hole so then you have a nice slit and it won't tear! Now make 1 tag and mat it on purple cardstock and staple a piece of the seam binding on it and put it in the pocket (slit) then cut with the tag die a tag out of the paper and pull a piece of seam binding through it and put that in the slit too. For the front pocket you cut a nice big label out of the paper collection and a small one and bind them together on the top with a piece of seam binding and put that in the front pocket.
Coneflowers: Stamp some Cone flowers on white cardstock with the Rich Cocoa, cut them out with the coordinating dies and color them with the Lulu lavender, Dusty Concord and at the tips some Vibrant Fuchsia. Put some glue on the pollens and dip them in the (train) sand, let then dry. Also for the greenery, I colored them with a mix of Bamboo leaves and Leaf Green and on the tips some yellow dots with the Yellow pearlpen. Now you can make a nice arrangement on the front of your card, put some flowers on foam tape for dimension.
Created By: Els Schutte
Fairy Garden
Save Project to My Library
Other Products: Flat back pearls, Miniature train sands, Bead, wire, Pearl pen creme and yellow, White marker, Distress Ink Vintage photo and Fossilized Amber, Glue gun, Big shot, White cardstock, Black Fine marker, Glitter Glue, pencil, Foam pads, scor-pal, Stickles, Rabbit Image Lynn Design, Straws, Acetate, 4 spacers, Fairy Image Internet, Silhouette Machine, Light Green cardstock, Circle Punch, 2x Cardboard 6 3/4 x 6 3/4, Rhinestone butterfly, Black cardstock
For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.
Instructions: Click here to view a larger photo of this project. You will be making two boxes to create this easel card. Cut 4 pieces of Light Green Cardstock for the Box sleeves at 4 x 8 1/4" score them at 2 3/4", 3 7/8", 6 5/8" and 7 3/4" you have left 1/2 inch, put glue or tape on this and close the sleeves. Cut 4 pieces of Light Green Cardstock for the boxes at 4 3/4 x 6 1/8" score them 1 inch on every side then cut in to 2 sides till the score line and fold them into a box. Take your circle punch and punch a half circle on 1 side on the top of the box, make a hole under it. Take a flower stamen and put it into a spacer and put the whole thing in the hole of the box like a knob, cut off the wire and roll it up on the inside. Now put all the boxes in the sleeves and put them on a piece of the 6 3/4 x 6 3/4 Cardboard and glue or tape them down. On top of that you glue the other piece of cardboard. Cut a piece of design paper 6 1/2 x 6 1/2", ink the edges with the Vintage photo and glue this on top. Cut a piece of the light green cardstock at 6 x 12 inches and score it on 3 and 6 inches. On the side of the 6 inch piece you can make a nice edge with the Regal Borders and pockets Die, glue this on top of the design paper. Now cut a piece of the same Green cardstock at 6 x 6 inches and make a nice edge with the same edge die on 1 side, glue this piece on the 3 inch piece of cardstock so that it stands up, with the nice edge on top (easel card). Take 2 straws and cut them in different lengths and glue them in front of the standup flap so that it can't slide flat, Ink the straws with some Vintage photo.
Now for the box cut a piece of the Light green of 6 x 6 inch and score all the way 3/4 round then cut in 2 sides and fold and glue the box together, then for the lid do the same as the box but first glue a piece of design paper on top then make a hole in the center with the large circle die, then glue a piece of acetate behind it. For the inside of the box you can use the circle and glue it down in the center make a few flowers and use 1 in the box, glue it down with foam dots then it is a little bit 3D put a Rhinestone butterfly in it, now you can close the box by gluing the lid on it. Take some silver tape and glue this around the box, now glue the whole box on top of the card.
I found the fairy on Internet here and I traced it in my silhouette machine and cut it out of black cardstock and glued it on the right upper corner, put some stickles on her wings and give her a flat back pearl in her hands.
Now make all the flowers see further down in the instructions how to, then make a nice arrangement on the front, the rabbit is standing against a piece of acetate, I ordered the Rabbit on line here, I cut his arm loose and put some flowers in it.
Stamp the Big peony flowers with the Peanut Brittle on White cardstock and cut them out with the coordinating die, make a hole in the center, color them with tangelo and fossilized amber. Take a big bead and pull a wire through it cover the whole bead in glue and dip it in the (train) sand, then put it in the hole of the flower and glue it down! Pull the leaves a little bit to the back, then your 3D coneflower is done.
Stamp the coneflowers with Rich Cocoa on White cardstock and color them with the Vibrant Fuchsia, and the yellow ones with Fossilized Amber and in the center tangelo, for the leaves I used a mix of the bamboo leaves and leaf Green. Put some glue on all of the coneflowers tops take some of the (train) sand and dip the tops in that, now you have nice pollens on top of your flower! And on top of the flower petals you can put a white line with the white marker.
Created By: Els Schutte
Scenic View
Save Project to My Library
Other Products: Flat back Rhine stones, butterfly (internet), Miniature train sands, Pearl pen creme, White marker, Distress Ink Vintage photo and Fossilized Amber, Glue gun, Big shot, White cardstock, Black Fine marker, Glitter Glue, pencil, Foampads, scor-pal, Stickles, Xacto knife.
For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.
Instructions: Finished size is 5 3/4 x 6 x 2 inches. Cut 2 pieces of white cardstock at 5 3/4 x 10 inches, score at 2 inches on both ends. Cut another piece of white cardstock 5 3/4 x 8 inches, score at 1 inch on each side. On one of the 10 inch cardstocks, die cut the large circle in the center, on the 8 inch cardstock, die cut the second largest circle out in the center. Choose a panel from the backyard blossoms paper pad and trim to 5 3/4 x 6 inches. Fussy cut a cottage from the Lush Lilac paper pad. Use an Xacto knife to cut around a few flowers from the Backyard Blossoms panel, and tuck the cottage in behind it. Adhere this panel on the solid cardstock, and fold the scored sides forward. This will be the background.
Diecut the Frame A Card die on white cardstock and trim one side off and adhere it to the backside of the 8 inch cardstock, so its visible from the left side of the circle. Fold the 1 inch sides of this panel back, adhere the sides of this panel onto the sides of the background, creating dimension. Take the 10 inch remaining cardstock, with the large circle diecut, and fold those sides back. Adhere those onto the sides of the background. This will create the diorama, now accessories as desired.
Stamp three medium peonies in Rhubarb Stalk on white cardstock and die cut with the coordinating die, then color the center with Peanut brittle and the tops with Vibrant Fuchsia. Shape the flowers with the shaping tool set and adhere together creating on large flower. Stamp 2 of the extra small peony and 3 of the small peony with Rhubarb Stalk and die cut. Color the center with Peanut Brittle and the rest with Rose Madder. Stamp 4 Lilac petals in Rhubarb Stalk ink onto pink designer paper from the coneflower collection and die cut. Shape using the Deluxe Flower Shaping kit and insert stamen in the centers.
Stamp assorted coneflowers with Rich Cocoa ink on white cardstock and color them with the Vibrant Fuchsia ink or Fossilized Amber with Tangelo in the center. For the leaves I used a mix of the Bamboo Leaves and Leaf Green. Apply glue to the centers of the coneflower and add miniature train sand, allow to dry. Finish coneflower by adding a while line on the petals with a white marker.
For the rest of the greenery and flowers use the Rain Boots and Blossoms collection and the Backyard Blossoms, stamp them on white cardstock with the Rich Cocoa ink and color them with a mixture of Bamboo Leaves and Leaf Green, Die cut all the leaves and flowers with the coordinating dies and shape them with the Deluxe Shaping tool set!
Assemble as shown. Finish with Rhinestones and adding Pearl Pen drops on to desired pieces.
Created By: Els Schutte
Timeless Florals
Save Project to My Library
Other Products: Cutting file mantel Clock Dreaming Tree, Clock Components, Flat back Rhine stones, Images fairies and butterfly (internet), Beads, Miniature train sands, Pearl pen creme, White marker, Embossing folder wood, Filigree element, Silhouette machine, Distress Ink Vintage photo, Distress Ink Fossilized Amber, Acetate, Brown cardstock, Black Cardstock, Creme cardstock, wire, Glue gun, Big shot.
For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.
Instructions: Click here to view a larger photo of this project. Start with Cutting the clock file found here out of all the cardstock and glue it together as the instructions tell you. It is all on the Dreaming tree site if you click on the clock you get the instructions. Then put on the clock components, for the front and sides I used the design paper from the collection. On the sides of the clock you can use the embossing folder, put some brown cardstock in the folder and run it through the Big Shot machine and glue them on the side.
ROSES: Stamp the Big Yellow Peony with Peanut brittle on White cardstock, and the Pink one with Rhubarb Stalk and cut them out with the coordinating die, then color the yellow one with Peanut brittle and Distress Ink Fossilized amber, and the pink one with peanut brittle in the center and the rest of the flower with Vibrant Fuchsia. Now you can shape the flowers with the Deluxe Flower Shaping Kit.
CONEFLOWERS: Stamp the flowers with Rich Cocoa on White cardstock and color them with the Vibrant Fuchsia, and the yellow ones with Fossilized Amber and in the center tangelo, for the leaves I used a mix of the bamboo leaves and leaf Green. For the 3D Coneflowers you take a bead on a wire and then stamp an extra peony petal, color this in the same colors as the other Coneflowers, then make a hole in the center and pull the bead through that and secure it with hot glue, then fold the leaves backwards, put some glue on all of the coneflowers tops take some of the (Miniature) sand and dip the tops in that, now you have nice pollens on top of your flower! And on top of the flower petals you can put a white line with the white marker.
GREENERY: For the rest of the green and Flowers use the rain Boots and Blossoms collection and the rose Classic Rose vine, and the backyard Blossoms. Stamp them on white cardstock with the Rich Cocoa and color them with a mix of Bamboo leaves and leaf Green, on the rose leaves you can put some Vintage photo too then cut all the leaves and flowers with the coordinating dies and shape them with the Deluxe Shaping tool set! On some of the petals you can glue some flat back Rhinestones and on top of some flower branches add some pearl pen dots.
Cut out the fairies and Butterfly and put glue on the wings and on top of that some Crystallos Shard Glass, let them dry, behind the flying fairy you can put a piece of acetate then it will fly in front of the clock cover the acetate with some leaves. The other fairy is sitting on the right side corner with a flat back Rhinestone in his hand. Now make a nice arrangement on top of the clock with all the flowers you like. Glue the filligree element on the bottom front of the clock and at last put a battery in the clock! Done!
Created By: Els Schutte
Save Project to My Library
Other Products: White cardstock, White Ribbon, Gold stripe Cardstock, Gold Cardstock, Foam tape, Glue gun, Corner rounder
For more tips on creating with the Butterfly Dreams collection, watch the tutorial at https://youtu.be/uCKKJfAQFHA.
Instructions: Cut a piece of White Cardstock at 12 x 6 inches, put it on your score board and score it in half, so now your card is 6 x 6 inches. Cut a piece of the gold striped cardstock at 5 3/4 x 5 3/4 inches and round the corners. Die cut 2 squares with the Butterfly Kisses decorative die, 1 round one, 1 circle, all from white cardstock and die cut the sentiment letters from gold cardstock. Glue 1 Square frame in the middle of the card, then cut all 4 corners of the second frame and place them on each corner of the card. Now take a piece of 8 inch white ribbon, and place this on top. Fold it back and tape it down on the backside of the striped cardstock. Now glue the whole part on your white card. On top of the ribbon you place the round doily you cut out. Take your round circle and put foam tape on the back and glue it on the right bottom corner, then glue the gold word Thank You on top of that!
Make a nice bow with the white ribbon and glue this with the glue gun on top of the doily. Die cut a butterfly from the Fluttering Butterfly Dies out of the gold cardstock, bend the wings up and place it with the glue gun on top of your bow.
Created By: Els Schutte
Shadowed Flutters
Products Used
Designer Dries Clear Adhesive, 159723Memento Dye Ink Pad - Rhubarb Stalk, TSMP301
Memento Dye Ink Pad - Rose Bud, TSMP400
Memento Dye Ink Pad - Teal Zeal, TSMP602
Memento Dye Ink Pad - New Sprout, TSMP704
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Peanut Brittle, TSMP802
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Deluxe Flower Shaping Kit, HCST1-401
Regal Borders and Pockets Die, HCD1-779
Memento Dye Ink Pad - Sweet Plum, TSMP506
Tropical Hibiscus Cling Stamp Set, HCPC-3736
Tropical Hibiscus Die, HCD1-796
Memento Dye Ink Pad - Lulu Lavender, TSMP504
Classic Rose Vines Cling Stamp Set, HCPC-3753
Classic Rose Vines Die, HCD1-7111
Krystallos Shard Glass, 901
Brilliance Ink - Pearlescent Poppy, TSBL63
Stack and Store Daubers-Pack of 30, HCDA2-450
Tropical Cockatoo Cling Stamp Set, HCPC-3781
Tropical Cockatoo Die, HCD1-7136
Pastel Bead Stamens-Medium, HCS1-457-3
Bridal Bouquet Stamens-Small, HCS1-460
Rain Boots and Blossoms Cling Stamp Set, HCPC-3811
Rain Boots and Blossoms Die, HCD1-7169
Large Sweet Peony Cling Stamp Set, HCPC-3820
Small Sweet Peony Cling Stamp Set, HCPC-3819
Large Sweet Peony Die, HCD1-7174
Small Sweet Peony Die, HCD1-7173
Butterfly Kisses Cling Stamp Set, HCPC-3825
Fluttering Butterfly Cling Stamp Set, HCPC-3824
Butterfly Dreams Paper Collection, HCDP1-289
Fluttering Butterfly Die, HCD1-7178
Other Products: Nest, Fairies image Internet, Rhine Stones Pink, Distress Ink Vintage Photo, 7-7-Shadow Box Digi cuts, Cardstock White, Cardstock Bazzill Rain, Green Cardstock, pearl pen Creme, Pearl pen blue, Heat gun, Heat tool, Embossing powder Clear, Acetate, Versamark.
For more tips on creating with the Butterfly Dreams collection, watch the tutorial at https://youtu.be/uCKKJfAQFHA.
For more tips on creating with the Sweet Peony collection, watch the tutorial at https://youtu.be/L9_MLkvpGPQ.
Instructions: Click here to view more photos of this project. Cut the Shadow box out of the Bazzill Rain Color and Glue it together by following the instructions here. https://www.digicuts.co.uk/product/7x7-shadow-box-frame-svg-fcm-cutting-files/ Take a nice sheet of the paper collection and glue it in the box, this is your back. Stamp with Rhubarb Stalk the sentiment Butterfly Kisses and Wonderful Wishes from the Butterfly Kisses stamp. Put some glue on the Butterfly and put some of the Krystallos Shard glass on it. Cut a piece of Acetate at 6 1/2 by 6 1/2 and glue this on top of the box, then on top of that you glue the square with the shape. Cut 2 Borders from the regal Border and Pockets die from the paper collection and Ink the edges with the Vintage Photo Distress Ink, glue 1 on the bottom part, and 1 on the right side.
Stamp 3 Butterflies with the Fluttering Butterfly stamp in Black Tuxedo Ink on White cardstock then color them with the memento Inks In the Colors: Teal Zeal, Rose Bud, Lulu Lavender, Peanut Brittle, New Sprout and Bamboo Leaves. Cut them out with the coordinating dies, get some VersaMark Ink on them and cover them with Clear Embossing powder and melt that with a heat tool. Now glue 2 Butterflies on top of each other and shape the upper wings so that they are standing up, put some glue and some Krystallos Shard glass on the bottom part of the Butterfly. Now glue this one on the left upper corner. Glue the other Butterfly upside down behind the fairy so now it looks like his wings.
Stamp the Large and small peonies on White cardstock with the Rhubarb Stalk and cut them out with the coordinating dies, then color them with the Peanut Brittle in the middle and the rest with Pearlescent Poppy and shape them on the shaping mat with the shaping tools from the Deluxe Flower Shaping Kit. Cut some large and small Poinsettia's out of green cardstock and spray them lightly wet and roll the petals between your fingers, make a hole in them and glue them on the bottom of the flower! Now take 7 small ones and put a stamen in and glue them under the butterfly on the left side. Color the Big ones in the same colors as the small ones, shape them with the shaping tools on the shaping mat, make a hole in them and put some stamens in, now glue them on the right bottom corner. Under those Big flowers you can glue some smaller ones too. You can make a bud with 1 middle size flower, just roll it up and glue a (poinsettia) around it. Glue the fairy with the wings on top of that, on the other flower you can glue a fairy too. Put some blue dots in the nest with the Blue pearl pen and glue it in between the leaves. Now Stamp all the leaves you want from the various collections with the Tuxedo black and color them in different colors of green, like the Bamboo leaves and the New Sprout and put some Distress Ink on them too. Shape them and then arrange them in between your flowers.
Finish the box off with some Pink Rhinestones on some leaves and on the box, on the smaller leaves you can put some pearls with the Pearlpen.
Created by: Els Schutte
B-eautiful B-utterfly
Products Used
Designer Dries Clear Adhesive, 159723Memento Dye Ink Pad - Rhubarb Stalk, TSMP301
Memento Dye Ink Pad - New Sprout, TSMP704
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Peanut Brittle, TSMP802
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Deluxe Flower Shaping Kit, HCST1-401
Sparkling Poinsettia Die, HCD1-766
Classic Rose Vines Cling Stamp Set, HCPC-3753
Classic Rose Vines Die, HCD1-7111
Brilliance Ink - Pearlescent Poppy, TSBL63
Stack and Store Daubers-Pack of 30, HCDA2-450
Pastel Bead Stamens-Medium, HCS1-457-3
Bridal Bouquet Stamens-Small, HCS1-460
Large Sweet Peony Cling Stamp Set, HCPC-3820
Small Sweet Peony Cling Stamp Set, HCPC-3819
Large Sweet Peony Die, HCD1-7174
Small Sweet Peony Die, HCD1-7173
Fluttering Butterfly Cling Stamp Set, HCPC-3824
Butterfly Dreams Paper Collection, HCDP1-289
Fluttering Butterfly Die, HCD1-7178
Other Products: Fine liner Black, Cardstock Black, Cardstock White, Golden Rub on letters, Treasure Gold, Rhinestones Blue, Letter B SVG file Silhouette store, Wink of Stella Clear, Versamark, Clear Embossing powder, Heat tool, Distress Ink Vintage Photo, Craft knife.
For more tips on creating with the Butterfly Dreams collection, watch the tutorial at https://youtu.be/uCKKJfAQFHA.
Instructions: Take a piece of the paper from the paper collection, cut the B using the SVG file found here. When cutting the B, center it on the paper so that you still can use the remainder of the sheet. In the upper left corner there is a rose on the paper, cut it along the bottom of the rose, using the craft knife, allowing you to slide the black cardstock underneath it. Cut the Black Cardstock at 11 1/2 x 11 1/2 inches and glue this on your sheet. Now glue the letter B on top of that. Take your Fine Liner and make a nice stitched edge on the letter B. Cut 2 butterflies out of the paper collection and put Versamark on them, and on top of that Embossing powder. Melt that with the heat tool, then lightly shape the wings. Finish them off with some Treasure Gold. Put 2 pink stamens behind the Butterfly for his Antenna.
Stamp the large and small peonies with Rhubarb Stalk on white cardstock and cut them out with the coordinating die. Color them with Peanut Brittle in the middle and the rest of the flower with the Pearlescent Poppy. Shape them with the Deluxe Shaping mat and tools. Make 2 large flowers, 1 medium, 1 small and some tiny filler flowers. Pierce a hole in the flower centers with the paper pierce from the deluxe flower shaping kit and put some stamens in. For the smaller flowers you can do 1 big stamen. Stamp with Tuxedo Black some Rose Vines, color them with the New Sprout, Bamboo Leaves and a little bit of the Vintage Photo inks. Cut them out with the coordinating die and shape them with the Deluxe shaping mat and tools. Glue all of the flowers on the left bottom of the letter B and make a nice arrangement, put a few leaves on top under the rose shape. Glue one butterfly on the right upper corner off the letter B and give him a nice body with a kind of rhinestone shape, then the second Butterfly goes on top of the flower arrangement.
Take the Rub on letters and make the word butterfly. On the edge of the page, put some Wink of Stella Clear, also on the flat rose. On the large peonies I put also some Treasure Gold, you can apply it with a sponge or your finger. Finish your lay out with some blue rhinestones.
Created by: Els Schutte
Other Products: Creme Cardstock, Pearl pen creme, Straws, Ribbon with Hearts, Fine liner, paper Distresser, Distress Ink Vintage Photo, foam tape.
For more tips on creating with the Sweet Peony collection, watch the tutorial at https://youtu.be/L9_MLkvpGPQ.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Cut a piece of Creme cardstock at 8 x 11 Inchess and fold it double to 8 x 5 1/2, then cut a piece of the paper collection at 8 x 4 1/2 and distress the sides with the distress tool then ink it with the Distress Vintage Photo. Make some doodeling with the fine liner on the edges. Take your ribbon and fold it over the paper and tape it down on the back now glue this on the folded card.
Stamp with memento Rhubarb and the peony stamps on White cardstock, cut them out with the coordinating dies and color them with a mix of Rhubarb, Rose Bud and Peanut Brittle inks. Shape them in the Flower Shaping mold. Stamp some leaves with Tuxedo Black and color them with Bamboo leaves and a little bit of Vintage Photo, cut them out with the coordinating dies and shape them a little bit on your shaping mat.
Take 3 Straws and cut them in 3 different lengths and glue them on your card on top of the ribbon, then on top of the straws you can make a nice Bouquet with your flowers. In the Middle of the tiny flowers you can put a little dot with the pearl pen and also next to the flowers you can do that. In the Bouquet you can also stick some Flower stamens.
Take a label from the paper collection and stamp with the Black Tuxedo and the Today's Quotes stamp the word So Grateful, put this on a piece of foam tape and stick it on the right bottom corner.
Created By: Els Schutte
Check Please
Products Used
Designer Dries Clear Adhesive, 1597233-D Crystal Lacquer, 3D1844
Memento Dye Ink Pad - Rhubarb Stalk, TSMP301
Memento Dye Ink Pad - Rose Bud, TSMP400
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Peanut Brittle, TSMP802
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Deluxe Flower Shaping Kit, HCST1-401
Stack and Store Daubers-Pack of 30, HCDA2-450
Peony Bud and Blossom Cling Stamp Set, HCPC-3821
Large Sweet Peony Cling Stamp Set, HCPC-3820
Peony Bud and Blossom Die, HCD1-7175
Large Sweet Peony Die, HCD1-7174
Other Products: Fine liner Black, Brush, Cutting File Check Envelope Silhouette store, Foamtape, Distress Ink Vintage Photo.
For more tips on creating with the Sweet Peony collection, watch the tutorial at https://youtu.be/L9_MLkvpGPQ.
Instructions: Click here to view a larger photo of this project. Cut the file from the Silhouette store (found here) on white cardstock and glue it together, I used a black pen to create a dotted line around the edge. Stamp your flower 3 times on white cardstock with the Memento Rhubarb Stalk ink, and cut it out with the coordinating die, then color it with a mix of Rose Bud, Rhubarb Stalk and Peanut Brittle. Use one whole flower, cut the second flower some smaller and then the third, you only use the middle part. Glue them on top of each other with the foam tape so you get a 3D flower.
Stamp some leaves on white cardstock with Black Tuxedo ink, cut them out with the coordinating die, then color with Bamboo Leaves and Vintage Photo ink. Shape them a little bit on your mat, then take your brush and cover the whole flower in 3D Crystal Laquer and let it dry.
Create a bellyband that slides onto the card using white cardstock. Cut a buckle using your Silhouette, (found here), and adhere onto your belly band. Attach flower and leaves onto the belly band and slide it on your envelope.
Created by: Els Schutte
Sweet Charlie
Products Used
Designer Dries Clear Adhesive, 1597233-D Crystal Lacquer, 3D1844
Memento Dye Ink Pad - Rhubarb Stalk, TSMP301
Memento Dye Ink Pad - Rose Bud, TSMP400
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Peanut Brittle, TSMP802
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Deluxe Flower Shaping Kit, HCST1-401
Brilliance Ink - Pearlescent Coral, TSBL32
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Stack and Store Daubers-Pack of 30, HCDA2-450
Sweetheart Borders Die, HCD1-7161
3D Floral Basics Shaping Mold, HCFB1-464
Lush Lilac & Umbrella Spray Cling Stamp Set, HCPC-3817
Lush Lilac Cling Stamp Set, HCPC-3816
Lush Lilac & Umbrella Spray Die, HCD1-7171
Lush Lilac Die, HCD1-7170
Peony Bud and Blossom Cling Stamp Set, HCPC-3821
Large Sweet Peony Cling Stamp Set, HCPC-3820
Small Sweet Peony Cling Stamp Set, HCPC-3819
Sweet Peony Paper Collection, HCDP1-288
Peony Bud and Blossom Die, HCD1-7175
Large Sweet Peony Die, HCD1-7174
Small Sweet Peony Die, HCD1-7173
Other Products: Silver Heart, pearl pen white, creme, Bling on the roll, Pink lace, Wire with pompoms, tape, Cardstock Bordeaux, wooden word Memories, gold embossing powder, Heat tool, cardboard 12-12, Ribbon, 2 beads, Distress Ink Vintage Photo, Versamark Ink
For more tips on creating with the Sweet Peonycollection, watch the tutorial at https://youtu.be/L9_MLkvpGPQ.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Take a paper from the paper collection and adhere it on a piece of 12 x 12" cardboard. Make 2 holes in the top corners and pull a ribbon through it make a stop with a bead at the end. Mat your photo on a piece of Bordeaux Cardstock and adhere on your layout. Take a piece of pink lace and adhere along the bottom of the photo, also add a piece of the bling on a roll. I used a little silver heart on the dog's belt.
Stamp your peony petals on white cardstock with Memento Rhubarb Ink, color them with Rose Bud, Brilliance Coral and in the middle, Peanut Brittle. Then die cut with the coordinating die and shape them with the Flower Mold - see Video. Stamp the Lilacs with Rhubarb Stalk and color them also with Rose Bud and Coral. Diecut with the coordinating die and shape them on your shaping mat from the Deluxe Flower Shaping Kit.
Stamp the leaves, peony bud, peony blossoms, lilac stem in Tuxedo Black and diecut with coordinating dies. Color the leaves with the Bamboo Leaves and in some spots, add Vintage Photo Distress Ink. Color the lilac stem, peony bud and blossoms in Rose Bud, Coral, and Bamboo Leaves ink. Shape as desired with the flower shaping kit.
Diecut the lilac buds and sweetheart border on Bordeaux cardstock, cut the border in half and only use the curly pieces. Now you can make a nice flower arrangement on the bottom right. Take your Pearl Pen and make some dots in your flowers and on the lilac and some glitter glue on some flat flowers, and then with the 3D Crystal lacquer you can make some water drops on the flowers.
Take the wooden word and put some Versamark Ink on it and then put some gold embossing powder on top and heat with the heating tool. Adhere it on the upper left side of your photo.
Created by: Els Schutte
Tmeless Beauty
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
3-D Crystal Lacquer, 3D1844
Memento Dye Ink Pad - Rhubarb Stalk, TSMP301
Memento Dye Ink Pad - Rose Bud, TSMP400
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Deluxe Flower Shaping Kit, HCST1-401
Ornate Borders and Pockets Die, HCD1-780
Memento Dye Ink Pad - Sweet Plum, TSMP506
Memento Dye Ink Pad - Lulu Lavender, TSMP504
Classic Rose Vines Cling Stamp Set, HCPC-3753
Classic Rose Vines Die, HCD1-7111
Fleur Border Basics Die, HCD1-7120
Elegant Border Basics Die, HCD1-7121
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Stack and Store Daubers-Pack of 30, HCDA2-450
Rajni Chawla's Crystal Clear, PGM15015
Heartfelt Love Sentiments Cling Stamp Set, HCPC-3804
Today's Quotes Cling Stamp Set, HCPC-3813
Bridal Bouquet Stamens-Small, HCS1-460
3D Floral Basics Shaping Mold, HCFB1-464
Rain Boots and Blossoms Cling Stamp Set, HCPC-3811
Rain Boots and Blossoms Die, HCD1-7169
Lush Lilac & Umbrella Spray Cling Stamp Set, HCPC-3817
Lush Lilac Cling Stamp Set, HCPC-3816
Lush Lilac & Umbrella Spray Die, HCD1-7171
Lush Lilac Die, HCD1-7170
Large Sweet Peony Cling Stamp Set, HCPC-3820
Small Sweet Peony Cling Stamp Set, HCPC-3819
Sweet Peony Paper Collection, HCDP1-288
Large Sweet Peony Die, HCD1-7174
Small Sweet Peony Die, HCD1-7173
Other Products: Images Pinterest, Gold Rubber Band, Pony Beads, Black Fine liner, Distress Ink Vintage Photo, Pearl Pen Clear and White, Lace, Flatback Pearls, Thin White Rope, Seambinding Pink, Bordeaux Cardstock, Paperclip, Heart (Dollar store), Glitter glue Pink, Frame Image Pinterest, Keyhole (my stash), Cardboard 5 pieces 5 - 12 inch, scor tape.
For more tips on creating with the Sweet Peony collection, watch the tutorial at https://youtu.be/L9_MLkvpGPQ.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Click here to view a larger photo of this project. Take all 5 pieces of Cardboard and decorate them on both sides with design paper from the Collection. Then leave one complete and Ink it all the way around with Distress Ink Vintage Photo, this is the back. Then for the next one, the fourth, you cut a Horizontal V shape, when done you'll have 2 parts, ink all the edges with the distress Ink. For the Third one you cut a Vertical line a bit on the right side, then ink all the edges with the Distress Ink. For the second one you cut a vertical line on the left side, almost in the middle, then Ink all the edges with the Distress Ink. For the Front cover you cut a shape that looks like this / and ink all the edges! You can also choose to use different shapes like a half Circle or you can cut the shape of the design paper, (I will have some photos on my Blog). So now take the back cover and make 2 holes on the right side, 1/4 inch from the side and 3/4 inch from the top and bottom, do this on the left side too! Then you make the same holes on the same places in all your other 4 pieces. Take a piece of the gold rubber band and fold it double and put each end in a hole, start on the back and put one end in the upper hole and the other end in the Bottom hole, do the same at the other side. Now you have 4 strings of the rubber band on the front side, put a bead on each piece then put cardboard number 4 on it, get the rubber band through the holes and then a bead, do the same with all the pieces and at the end you will have 4 pieces of the gold rubber band on your front cover, then make a double bow in them and at the end I put a bead. So far you finished your basic book!
For the decorations I used images from Pinterest, but normally I would use my own photos. Take your photos and tape them on a piece of Bordeaux cardstock to mat them, then you have a nice little frame around your photo! Now you can put your photos in the album, and you can decorate it at your own taste with labels, pockets, borders etc. because the shapes or photo sizes are different.
For the cover I used 2 Images, I matted them on the Bordeaux cardstock and cut them out so that they have a small frame. I also put some dries clear glue on the image and covered it with the Crystal Clear. (You can't do this on a real photo!) Now get some white cardstock and stamp with memento Ink Rhubarb the large and small Peony and cut them out with the coordinating die. Color them on the back and front with Memento Rose Bud and then you put them in the Flower Shaping mold with the wrong side up, spray them a little bit wet and put the top on the mold and run it through your machine. Then turn them over and using the Deluxe Flower Shaping kit, press in the middle of the flower and put them together. See the video above. Then stamp with Memento Tuxedo Black the Lilac, the rain boot and blossom stamp, the leaves and Rose Vines, color all the leaves with memento bamboo leaves shade them a little bit and add some distress ink on them too. Color the Lilac with Memento Lulu lavender and Sweet Plum. When everything is colored you can cut them out with the coordinating dies and shape them on your Shaping mat. In the middle of the Lilac you can pierce a little hole and add a small flower stamen.
On every page I used my fine liner to make little lines on the edges. When all the flowers are shaped and dry then you can make a nice arrangement on your front cover.
Created by: Els Schutte
Lilac Birdcage
Lovely Lilac Birdcage
Other Products: White cardstock, Cutting machine (Big Shot), Scissor, Foam tape, Ribbon, Pearlpen creme, Lilac, Birdcage Photoframe (Dollarstore), Glue gun.
For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.
Instructions: Click here to see a larger photo of this project. Open the Birdcage and put a photo or Image from the paper collection in it. Now stamp with Black Tuxedo Ink the Lush Lilac stamp set and the Rain Boots and Blossoms stamp set. Color all the flowers with the Sweet Plum, Rose Bud, Lulu Lavender and the leaves with bamboo Leaves, cut them all out with the coordinating dies, and shape them with the Deluxe flower shaping set, make holes in all the small lilac flowers, cut the stamens in half and put a stamen in all of the flowers.
On top of the birdcage you can make a nice arrangement with all the flowers you made, Use a glue gun to glue all the flowers. Decorate some petals with a pearl pen, also on the bottom part of the bird cage you can put some Lilac pearls. Put the Ribbon on top of the cage, and your birdcage is done.
Created By: Els Schutte
Lilac Birthday Wishes
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
Memento Dye Ink Pad - Rose Bud, TSMP400
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Deluxe Flower Shaping Kit, HCST1-401
Memento Dye Ink Pad - Sweet Plum, TSMP506
Memento Dye Ink Pad - Lulu Lavender, TSMP504
Stack and Store Daubers-Pack of 30, HCDA2-450
Assorted Pearl Stamens-Small, HCS1-459-1
Rain Boots and Blossoms Cling Stamp Set, HCPC-3811
Rain Boots and Blossoms Die, HCD1-7169
Lush Lilac & Umbrella Spray Cling Stamp Set, HCPC-3817
Lush Lilac Cling Stamp Set, HCPC-3816
Lush Lilac Paper Collection, HCDP1-287
Lush Lilac & Umbrella Spray Die, HCD1-7171
Lush Lilac Die, HCD1-7170
Other Products: White cardstock, Ribbon, Acetate, Cutting machine (Big Shot), Scissor, Ribbon, Pearl pen Creme.
For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.
Instructions: Cut a piece of White Cardstock at 6 1/4 x 5 3/4" score on top of the smaller side 1/2 inch so that your card is square now and measures 5 3/4 x 5 3/4" with an 1/2 inch flap, now cut a piece of Acetate at 5 3/4 x 5 3/4" and attach this on the flap with tape, this is your card white background, Clear front. Cut 2 borders with the Regal Borders and pockets die out of white cardstock and attach them on top and one on the bottom of the card, for the inside you cut a piece of the paper collection at 5 1/2 x 5 1/2" and glue this on the inside of your card. Take a piece of ribbon and fold it over the top, make a nice bow on the front side.
Now stamp with Black Tuxedo Ink the Lush Lilac stamp set and the rain Boots and Blossoms stamp set, color all the flowers with the Sweet Plum, Rose Bud, Lulu Lavender and the leaves with bamboo Leaves, cut them all out with the coordinating dies, and shape them with the Deluxe Flower Shaping Kit, pierce holes in all the small lilac flowers, cut the stamens in half and put a stamen in each of the flowers. Put some dots on some flower ends with the pearl pen. Cut a little saying out of the paper collection and glue this on the bottom of the card with Dries Clear Adhesive.
Created by: Els Schutte
A New Country Home
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Ornate Borders and Pockets Die, HCD1-780
Memento Dye Ink Pad - Sweet Plum, TSMP506
Memento Dye Ink Pad - Lulu Lavender, TSMP504
Stack and Store Daubers-Pack of 30, HCDA2-450
Young At Heart Die, HCD1-7158
Small Camelia Carnation Cling Stamp Set, HCPC-3806
Small Camelia Carnation Die, HCD1-7164
Assorted Pearl Stamens-Small, HCS1-459-1
Rain Boots and Blossoms Cling Stamp Set, HCPC-3811
Rain Boots and Blossoms Die, HCD1-7169
Lush Lilac & Umbrella Spray Cling Stamp Set, HCPC-3817
Lush Lilac Cling Stamp Set, HCPC-3816
Lush Lilac Paper Collection, HCDP1-287
Lush Lilac & Umbrella Spray Die, HCD1-7171
Lush Lilac Die, HCD1-7170
Other Products: Creme cardstock, Lilac cardstock, Cutting machine (Big Shot), Scissor, Ribbon, Pearl pen Creme, distress tool, Distress Ink Vintage photo, Fine liner, Rope.
For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.
Instructions: Cut a piece of Creme Cardstock at 10 x 5 inches and score on the short side 1/2 inch, now cut a piece of creme cardstock at 9 1/2 x 5 inches and glue this one on the flap, then you have your double card. On the open side make a mark in the middle at 2.5 inches in then cut out that V shape. Distress all the edges with the Distress tool and Ink them with the Vintage Photo. Cut from Lilac cardstock a piece of 9 x 4 1/2 and cut a V shape out, then a piece from the paper collection and cut this at 8 x 4 and cut out a V shape. Ink this one too with Vintage Photo, glue all the pieces on top of the card and put small lines with the Fine liner on the top one to make it look like stitches.
Now stamp with Black Tuxedo Ink the Lush Lilac stamp set and the rain Boots and Blossoms stamp set, color all the flowers with the Sweet Plum, Lulu Lavender and the leaves with bamboo Leaves, cut them all out with the coordinating dies, and shape them with the Deluxe shaping set. Make holes in all the small lilac flowers, cut the stamens in half and put a stamen in all of the flowers. Stamp on Lilac cardstock some carnations and cut them out with the coordinating dies, wet them and shape them on your Deluxe shaping tool set. Put some dots on some flower ends with the pearl pen. Cut out a flag with the young at heart die and write the words "a new home" on it.
For the inside you cut a piece of creme cardstock at 2 inches, the width of the card and glue them on 2 sides in the card as a pocket, then cut a nice border with the ornate borders and pockets die and glue this one on the pocket on 3 sides, then you have 2 pockets. Cover it with a piece of paper from the collection and ink the sides. Now cut a piece of Creme cardstock of 5 x 3 and cut 2 edges and round 2 corners, make a hole in the top and pull a ribbon through it and wrap a piece of rope around that, Ink the edges.
Created by: Els Schutte
Spring is in the Air
Other Products: White cardstock, Lilac cardstock, Grey Board, Ribbon, Corner stickers, Brad, Acetate, Cutting machine (Big Shot), Scissor, Foam tape, Ribbon, Pearlpen creme and Lilac, Birdcage Photoframe ( Dollarstore), Glue gun, Versamark Ink, Silver Embossing Powder, Key, fastener.
For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.
Instructions: Cut out of the Grey board 2 pieces 8 x 8" each and 1 piece of 8 x 2". Attach 2 pieces of Lilac cardstock together, lay them flat on the table and get the 2 x 8 piece of the grey board and tape that down in the middle. Then leave a space of 1/8" on both sides of that piece and tape down the other 2 parts on each side. Now cut 3/4" all the way around. Put tape on the Lilac flaps and fold them in so that the grey board is all covered! Now cut 2 pieces of the Lilac cardstock at 8 3/4 x 7 3/4" and glue that in the album to cover the front and back. Now for the binding system you cut a piece 2 3/4 x 7 1/2", a piece of 2 1/4 x 7 1/2" and a piece of 1 3/4 x 7 1/2", score these 3 pieces at 3/4" on each long side and fold it. Now put tape on both sides of the flaps and glue them on top of each other by putting score tape in the middle of each piece start with the bigger one and going smaller. When everything is glued together then glue it on the spine of your album. Cut 6 pieces of white cardstock 8 1/2 x 7 1/2" and score 1/2 inch on each side of the 8 1/2 side. Fold them so then your pieces will measure 7 1/2 x 7 1/2", now put tape on those flaps on all the 6 pages. Cut 6 pieces of white Cardstock 7 1/2 x 7 1/2" and tape them on the other pile you just made so when you've done, you have 6 pages on both sides. Now get the tape on the Lilac flaps and put the white cardstock pages over the lilac flaps, so then you are ending with 6 pages with a pocket on the right side. Now cover the album with paper from the collection, Ink all the edges with the Vintage photo. Make a hole in the spine and put a fastener through and hang the key on it.
Now stamp with Black Tuxedo Ink the Lush Lilac stamp set and the rain Boots and Blossoms stamp set, color all the flowers with the Sweet Plum, Rose Bud, Lulu Lavender and the leaves with bamboo Leaves, cut them all out with the coordinating dies, and shape them with the Deluxe shaping set, make holes in all the small lilac flowers, cut the stamens in half and put a stamen in all of the flowers. Start on the left upper corner with a nice bow and then make a nice arrangement of all your flowers on the cover of your album.
Cut out the Birdcage with the die from creme cardstock, cover it with the Versa mark Ink then put some Silver Embossing powder on top and melt it with the heat tool. Cut a piece of Acetate and glue this behind your Birdcage, cut a bird from the paper collection and glue this on your album then on top you can glue the Birdcage - glue only the corners and bend it a little bit so that it is round, put a brad on top of it, cut a saying from the paper collection and bend it and glue it down. Put also some leftover flowers on the corner of the cage. Put some nice stickers on the corner of your album.
Created By: Els Schutte
Nesting Dogwoods
Other Products: White cardstock, Creme Cardstock, Green cardstock, Blue Cardstock, Brown Cardstock, Light Brown cardstock, Cutting machine Silhouette, Scissor, Foam tape, SVGCuts cutting file, Green stamens.
To see how to shape the flowering dogwood, watch the video at https://youtu.be/gI8RqHAt3vE.
Instructions: See a larger photo of this project here. Cut out the SVG file from SVGCUTS from all the cardstock Colors with your machine. For the panels you use the Singing in the Rain pattern paper.
Stamp the Flowering Dogwood on White cardstock using Rose Bud ink. Make 3 big flowers and 2 small flowers. Diecut with coordinating die and color them with the Rose Bud ink only on the edges, then shape them on your Shaping mat. Glue 2 on top of each other, make a hole in the center and put the stamens in. Add some glue on each flower and add some Krystallos Shard Glass on top of that, this will really make your flower bling!
Stamp flowers from the Rain Boots and Blossom stamps with the Tuxedo Black ink on white cardstock and color with the Bamboo Leaves and Rose Bud inks. Die cut using coordinating dies. Arrange them on the front flap of the card as desired.
Created By: Els Schutte
The Fairy's House
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Wildwood Cottage Cling Stamp Set, HCPC-3771
Wildwood Cottage Die, HCD1-7127
Stack and Store Daubers-Pack of 30, HCDA2-450
Raindrop Sentiments Cling Stamp Set, HCPC-3812
Rain Boots and Blossoms Cling Stamp Set, HCPC-3811
Singing in the Rain Paper Collection, HCDP1-286
Rain Boots and Blossoms Die, HCD1-7169
Other Products: White cardstock, Creme Cardstock, Cutting machine (Big Shot), Scissor, Ruler, Stickles, Distress tool, Foam tape, Distress Ink Vintage Photo, twin marker Blue 74, Twin marker green 43, Dutch Doobadoo Art Card stencil nr 470-713-311.
For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.
Instructions: Click here to view a larger photo of this project. There are 3 lines on the stencil, the outline is for the cardstock, the second line for Design paper and the middle lines are score lines. Lay the Dutch Doobadoo Stencil on a piece of Creme cardstock and draw around the outside and cut it out, then take a piece of pattern paper from the collection and lay the stencil on top of it draw the second line and cut the pieces out, run your distress tool over the edges to make it rough and then Ink them with the Distress Ink. Now glue them on top of the Cardstock shape. Cut the girl out of the pattern paper and put her on the left side of the card, put glue on her wings and dress, on top of that sprinkle some crystal clear glitter. Now cut out some trees and flowers and layer them with the foam tape over the girl, like she is walking behind it. Stamp the raindrops from the raindrop Sentiment stamps with Tuxedo Black and put some stickles on them.
For the Middle part of the card stamp with Black Tuxedo Ink 2 windows and the door, cut them out with the coordinating die, color the door and windows with the green twin marker nr 43, Glue them in the middle part of the card. Color the hearts in the windows and door with the blue twin marker nr 74, cut out 2 boots from the paper collection and glue them next to the door, put some stickles on the curtains. Cut a sentiment from the collection and pop it up too and mat it on a piece of creme cardstock and glue this on the middle panel.
Fussy cut the image of the fairy in the tree out of the paper collection and put foam pads under it and glue that on the right panel of the card, put some glue and Crystal clear on the Fairy's wings and let it dry. Cut out some flowers from the collection and pop them up too and stick them on the bottom of the card.
Created by: Els Schutte
Sunny Days
Other Products: White cardstock, Creme Cardstock, Green cardstock, Pearl pen creme and, Cutting machine (Big Shot), Scissor, Ruler, Seambinding Ribbon, Stickles, Embossing Folder Bubbles, Distress tool, fineliner, Twinmarker chocolat 92, Twinmarker violet 84, Foamtape.
For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Cut a piece of Green cardstock at 8 x 12" and fold it in half so it is 8 x 6". Now cut a piece of the design paper at 5 3/4 x 7 3/4" and make the edges rough with the distress tool and ink them with the teal zeal ink. Glue this on top of the card base with dries clear adhesive.
Take a piece of the same Green cardstock as the card and cut it at 4 1/4 x 5 3/4", put this in the embossing folder and run it through the die cutting machine. Now cut 4 strips from the embossed cardstock, each 1 inch wide and different lengths and cut a V shape out on the bottoms. Glue them next to each other with 1/8" of space in between them and on top. Cut another strip and glue that on the top over all the vertical strips. Cut a border out of creme cardstock with the Ornate Borders and Pockets Die and glue this on the top strip. Make a bow and adhere it to the Ornate Border. Cut a saying from the paper collection and mat this on a green background, (also a patterned paper) and glue this on the right bottom corner. Glue a leftover piece of the Ornate Border die on top of that.
Now stamp with Black Tuxedo Ink the Umbrella from the Songs of Spring Stamp and color it with the Rose Bud, Bamboo Leaves, Teal Zeal, Cantaloupe, Twinmarker Chocolat, twinmarker Violet. On the tiny flowers you can put dots with the pearl pen. Wrap a piece of ribbon around the stick of the umbrella then Glue the umbrella with some foam tape on the card and let the ribbon come out on the bottom, cut a V shape out of the end and tape that down. Put some stickles on the birds and Umbrella for some bling.
Created By: Els Schutte
Spring Bouquet
Other Products: White cardstock, Pearl pen creme, Cutting machine (Big Shot), Scissor, Ruler, Distress Ink Vintage Photo, Tulle, Flower Bouquet Doily, Ribbon, Flower tape white, staples.
For more tips on creating with the Camelia Carnation collection, watch the tutorial at https://youtu.be/rhk76SAIgWQ.
For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: To view a larger photo of this project click here. Stamp with Morocco Ink 30 petals of the Large Camelia Carnation, cut them out with the coordinating die and ink all the edges with the Morocco Place the petals in the flower shaping mold, spritz them with water and run them through the die cutting machine. Let them dry, shape them a little bit with the deluxe shaping kit and glue 5 petals together. Then stamp some rose vines with the Tuxedo Black and color them with the bamboo leaves and a little bit with the distress ink Vintage Photo. Cut them out with the coordinating die and shape them on the mat. Stamp some flowers and leaves from the Rain Boots and blossoms with the Black Tuxedo and color them with the bamboo leaves and Rose Bud, cut them out with the coordinating dies and shape them a little bit on the shaping mat.
Now make a hole in the carnations and insert a large Stamen. Do this with all six flowers and adhere them together with dries clear adhesive. Make a bow with the ribbon and staple this on the doily, then staple the Rose vines and some other leaves you like all the way around, then get the carnations and pull them through the doily with the wire from the stamen. Get your Tulle and put this on a wire too and pull it through the doily and arrange it between the Carnations. Add the rest of your greenery and arrange this also in between your flowers. Make some dots with the pearl pen on some greenery to make them look like flowers.
Now get your flower tape and wrap that over all the stamens so that it is nicely finished.
Created By: Els Schutte
Bagful of Beautiful Blooms
Other Products: White cardstock, Cardboard Tube 11 inch long, Vintage Decor sticker Viva, Pearl pen creme and white, Bling on the roll, brads, Corner rounder, Die Cutting machine, Scor tape, Scissor, Ruler, Distress Ink Vintage Photo.
For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: To see a larger photo of this project, click here. Cut a piece of the Design paper to the length of your cardboard tube, you can use the 12 inch length, Ink the edges with the Vintage photo Distress Ink, now glue or tape this on the tube, now you have an empty space left so cut a piece of design paper at the same width and 6 inches high and glue this on the empty space, then cut a piece of the same design paper at 7 1/2 inch long and make a nice edge on it with the Regal Borders and Pockets Die, then score at 4 inch from the beginning of the edge die and 5 1/4 x 6 1/2 inches, fold the middle double and glue this part on top, Ink all the edges with Bamboo Leaves, make a hole on each site at 2 1/2 inch from the side. Cut two pieces 1 X 12 inches and glue them on top of each other, Ink the edges with the bamboo leaves and round the corners. Then you make a hole on both ends 1/2 inch from the edge and you can connect the handle to the purse with 2 brads.
Now take the bling on the roll and put 2 strips on the front to cover the edges, then take a Viva Decor sticker and stick this in the middle of the edge die pattern. Make 2 circles for your side closures and glue them in the circle on the outside, mine are 3 3/4 inches but it depends on the size tube you have.
Stamp with Rose bud Ink the Large Camelia Carnation and the smallest flower of the Flowering Dogwood, cut them out with the coordinating dies and Ink the edges of the flowers with the rose Bud very softly, then put them in the 3D Shaping Mold spray them wet and put the top on it and run it through the die cutting machine. Let them dry and glue the flowers together. I did 5 petals in 1 flower, 2 large and 1 smaller carnation and I rolled 2 petals to a form a bud. In the 4 smallest dogwoods you make a hole in the middle and put a flower stamen in the center.Then stamp with the Black Tuxedo Ink the petals from the Tropical Hibiscus and the Rain Boots and Blossoms, color them with the bamboo leaves and the flowers with the Rose Bud, Cut them out with the coordinating dies and shape them with the Deluxe Flower shaping kit. Then you can make a nice arrangement on your purse with all the flowers and leaves. You can finish it off with some pearls from the pearl pen, and put some dries clear glue on the flowers and some Crystal Clear so that they are shiny.
Created By: Els Schutte
Circling Beautiful Blooms
Products Used
Memento Dye Ink Pad - Rose Bud, TSMP400Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Classic Rose Vines Cling Stamp Set, HCPC-3753
Classic Rose Vines Die, HCD1-7111
Woodsy Wonderland Cling Stamp Set, HCPC-3767
Woodsy Wonderland Die, HCD1-7123
Flowering Dogwood Cling Stamp Set, HCPC-3773
Flowering Dogwood Die, HCD1-7129
Stack and Store Daubers-Pack of 30, HCDA2-450
Rajni Chawla's Crystal Clear, PGM15015
Eyelet Circle & Basics Small Die, HCD1-7154
Fanciful Carnation Cling Stamp Set, HCPC-3808
Camelia Carnation Paper Collection, HCDP1-285
Fanciful Carnation Die, HCD1-7166
Assorted Pearl Stamens-Small, HCS1-459-1
Other Products: White cardstock, White Pearl pen, glitter glue, scor-tape
For more tips on creating with the Camelia Carnation collection, watch the tutorial at https://youtu.be/rhk76SAIgWQ.
To see how to shape the flowering dogwood, watch the video at https://youtu.be/gI8RqHAt3vE.
Instructions: Cut a piece of white cardstock at 9 x 5 1/2 inches and score at 2 inches on both short sides, now cut a piece of the pattern paper you like at 5 x 5 inches and glue this in the center of the card with dries clear glue. If you use the pattern paper with the water on it you can use the glitter glue to make it a little bit shiny.
Cut a piece of White cardstock of 7 x5 1/2 inches and score at 1 inch on both short sides. Now take the second big circle of the small circle die set and make an aperature in the center. Fussy cut some flowers from the paper collection and glue them behind the circle on the left side. Stamp some flowers from the Woodsy Wonderland stamp with Tuxedo black ink, color them in with the Rose Bud color and cut the flowers with the coordinating die. Now cut some flowers from the strip and glue them behind the flowers you already put there. Put some tape on the front of the flaps and tape this to the part with the background on it. it will fit in the score lines and then you fold up the flaps.
Cut a piece of white cardstock of 9 x 5 1/2 inches and score at 2 inches at both short sides, use the large circle from the Small circle die set to make an aperture in the middle. Put scor-tape on the backside of the flap. This part goes on top of the other 2 parts you just glued together. Take the backing off the tape and glue down the flaps. Now Stamp the Fanciful carnation with Tuxedo Black ink and color it with the Bamboo leaves and Rose Bud. Cut it out with the coordinating die and glue this on the bottom right corner of the card. Fussy cut out the arch and glue this behind the opening, and also the other 2 parts of the flower border, glue them on the left side of the arch. Stamp the Rose vines with Tuxedo Black and color them with Bamboo Leaves and a little bit of the Vintage photo and cut them with the coordinating die. Cut a little piece of it and glue it behind the top of the small circle, the other part goes on the top of the carnation image. Then stamp 1 large Dogwood and 2 smaller ones and cut them out with the coordinating die, pierce the middle of the flowers and insert some flower stamens. Sponge the flowers with dries clear glue, sprinkle with Crystal clear and adhere them on top of the Fanciful carnation and the Rose Vine. Decorate the front and the Arch with some pearls using the pearl pen.
Created by: Els Schutte
Carnation Cluster Brooch
Other Products: White cardstock, Pearlpen Yellow, butterfly internet, Black marker, brooch pin, Brush, foam pads, heat tool, yellow twinmarker nr.44,
For more tips on creating with the Camelia Carnation collection, watch the tutorial at https://youtu.be/rhk76SAIgWQ.
For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.
Instructions: To view a larger photo of this project, click here. Stamp with Tuxedo Black 2 of the same images of the Fanciful carnation Stamp, color it with the bamboo leaves and the Rose Bud Ink, then cut it out with the coordinating die, place them on top of each other with the foam pads, now stamp 1 time the small camellia carnation with the black Tuxedo, color it lightly with the Rose bud ink, cut it out with the coordinating die and shape it with the Deluxe shaping kit, Glue the flower on top of the double flower you just made.
Stamp with the rosebud ink 3 small roses with the Classic rose collection on the foam paper and cut them out with the coordinating die shape them with the heat tool, make a hole in the center and put a flower stamen in, and glue 2 of them close to the Carnation.
Stamp 3 small and 3 middle carnations with the Tuxedo Black and color them lightly with the Teal Zeal Ink and cut them out with the coordinating die. Cut off 2 big petals together and 1 big petal separate and 2 small petals together (do this 2x with another size too), then ink the edges a little bit more and make the center yellow with the marker, now glue the 2 petals on top of the 1 petal and on top of that the 2 smaller petals, make some very fine lines with a black marker and make a dot in the center with the Yellow pearl pen. Glue these 2 pansies on top of the broche and on the bottom you can place the last foam flower against the pansies. Add some white stamens in between. After putting the brooch together, cut out a little oval from the small oval die and glue this behind the brooch, on top of that you can place the brooch pin. Now take a brush and cover the whole brooch with 2 layers of the 3D Crystal Lacquer, on top you can put a nice butterfly, let dry and done!
Created By: Els Schutte
Yes, I Do!
Other Products: White shiny cardstock, Black cardstock, Flatback Pearls, Joy Button die, Scor tape, Brush, Envelope punch board.
For more tips on creating with the Camelia Carnation collection, watch the tutorial at https://youtu.be/rhk76SAIgWQ.
Instructions: Click here to see a larger photo of this project. Use the template from my blog here for the Tuxedo Shirt and cut it out of White Shiny cardstock. Fold and glue it together with dries clear glue. Cut a strip of 5/8 inch for the closure and glue this down, then cut 4 buttons out of the shiny white cardstock and glue them on top of the closure.
Use the template from my blog for the Tuxedo and cut it out of black cardstock, score and fold all the lines and glue the ends together on the bottom, just a small piece!
Stamp the Small Camelia Carnation with Toffee Crunch Ink on white cardstock and cut the petals out with coordinating die. Use the second largest petal to create the carnation. Stamp also two leaves from the same stamp set with Bamboo Leaves Ink, color using the same ink and diecut using the coordinating die. Then stamp with Tuxedo Black the Fanciful Carnation (the one with the curly leaves) and color it with Bamboo Leaves and cut it out with the coordinating die, then cut of a few of the curly leaves and glue them on top of the Tuxedo, now make them shiny with 3D Crystal Lacquer and a brush. Let it dry and in the mean while you can shape the Carnation on your shaping kit, then glue the flower on top of the leaves.
Use an envelope punchboard and black cardstock to create a bow and glue this on top of the collar. Add a flatback pearl in the middle. I will put a photo on my blog with the sizes of the bow and how to cut it.
Created By: Els Schutte
Number Please
Other Products: White cardstock, Black cardstock, Scor tape, Brush, Envelope punch board, Black acrylic paint, Old wooden Toy telephone, bird, Distress Ink Vintage photo, Card/Grayboard, Tillandsia, Brads, Pipe Cleaners Black, Washi Tape, score board, black fine liner.
For more tips on creating with the Camelia Carnation collection, watch the tutorial at https://www.youtube.com/watch?v=rhk76SAIgWQ.
Instructions: See a large photo of this project here. Start with making connection strips: Cut strips of black cardstock 12 x 1 inches and score them in half on your score board and on one side you put tape on both sides of the score line, make 15 of them! Cut 2 pieces of gray board for the back and front that measure 1 x 7 inches, cut 2 pieces for the sides that measures 11 x 5 inches, cut 1 piece for the bottom that measures 7 x 5 inches and 1 for the roof that measures 5 1/2 x 7 1/2 inches. Connect the front, sides, back and bottom with the connection strips so that it looks like a box and that the strips are on the inside. Put 1 strip on the inside of the roof and connect it with the box! Now you can decorate the whole box with pattern paper from the Camelia Carnation collection. Cut a card front from the paper pad, cut out the circle in the center with the large circle die and glue it to the phone as shown. I bought an old wooden Telephone at the SOS and painted it black to use for parts. Make a hole in the front of the phone you created where you can attach the dial circle. You can also glue the speaker on the front as shown.
Cut a piece of black cardstock that measures 4 x 3 inches, make 4 holes in the corners and put the brads in, open them on the back, cut 2 of the window box element dies and glue them on top of the black piece. Now cut a piece of black cardstock 4 x 1 inches and glue this over it in the middle, cut a strip of the pattern paper and write the words with a black marker, cut the ends in a v shape and glue this piece on top of the black strip using dries clear adhesive, now glue this one under the dial part. Cut a small circle from the same paper using the smallest circle die, write 25 on it and glue it to the phone.
Glue the ear receiver on the side of the phone, connect 3 pipe cleaners together by twisting them and curl them around a round item to create the coiled wire and now you can glue one end on the receiver and one end on the bottom corner of the phone. Cut a piece of Cardboard of 6 x 2 3/4 inches for the front, 2 pieces 1 1/2 x 2 3/4 inches for the sides and 1 piece 1 1/4 x 6 inches for the bottom connect these with the connection strips like you did with the box and then cover them with the design paper. Cut a decorative border from the designer paper from the Regal Borders and Pockets Die and glue it to the front of this box with dries clear adhesive. Glue this box on the bottom front of the telephone, put some Tillandsia in it and glue a bird on top of it.
Stamp with the Morocco ink 3 Big Carnations from the Large Camelia Carnation stamp, cut them out with the coordinating die and Ink the edges very light with the Morocco Ink, then wet the flowers a little bit and shape them with the Deluxe Flower shaping kit. Then do the same with the small Carnations, make 2 small ones and from the leftover petals you can shape a bud.
For the pansies, stamp a few of the small carnations and a larger size with Morocco ink. Cut them out with the coordinating die, now cut 1 petal of the bigger one and 2 petal of the bigger one, color them with the cantaloupe and sweet Plum Ink, glue the 2 petals on the 1 petal and then 2 smaller petals on top, then take a black marker and put some fine lines in the heart of the flower, and also a dot of the yellow pearl pen, make 5 of them. Add some 3D Crystal Lacquer on top and let it dry. Stamp the Rose Vines with Black Tuxedo Ink and cut them out with the coordinating die, color them with the bamboo Leaves and a little bit of the Distress Vintage photo. Now stamp with the bamboo leaves and the Fanciful stamp 3 of the images and cut them out with the coordinating die and color them with the Morocco Ink and bamboo leaves. Cut some strips of design paper at 7 1/2 x 2 inches and tear one side. Ink it with the distress ink Vintage photo and curl it a little bit, then glue them on top of each other on the roof, starting on the front.
Now make a nice bouquet on the left side of your phone, also put some flower stamens in the purple and the yellow ones, also put some Rose vines, 1 pansy and some stamens where the bird sits, and your phone is done. You can also make or buy an address book to put in the phone.
Visit my blog here for more photos.
Created By: Els Schutte
Elegant Floral Gift Box
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
Memento Dye Ink Pad - Rhubarb Stalk, TSMP301
Memento Dye Ink Pad - Rose Bud, TSMP400
Memento Dye Ink Pad - New Sprout, TSMP704
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Deluxe Flower Shaping Kit, HCST1-401
Classic Rose Cling Stamp Set, HCPC-3752
Classic Rose Vines Cling Stamp Set, HCPC-3753
Classic Rose Die, HCD1-7110
Classic Rose Vines Die, HCD1-7111
Stack and Store Daubers-Pack of 30, HCDA2-450
Window Box Fillers Die, HCD1-7149
Window Box Fillers Cling Stamp Set, HCPC-3795
Heartfelt Love Paper Collection, HCDP1-284
Gift Of Love Box Die, HCD1-7163
Assorted Bead Stamens-Medium, HCS1-459-3
Other Products: Lace, Distress Ink Vintage Photo, Creme cardstock, Pearl pen White, hot glue gun, Vellum, Versafine black ink, spray bottle with water
For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.
Instructions: Cut the die 4 times out of Creme cardstock, use the flower insert in all 4 pieces to cut the flower window out, after that you can cut 4 pieces of the vellum and glue this behind the windows. Now you can glue the box together by putting dries clear glue on the tabs, when the box is done you can Ink all the edges with the Vintage Photo ink. Cut out 4 times the little top part from pattern paper and ink this too with the same ink and glue the pieces on the top part of the box, You can also cut a strip of pattern paper for the bottom and the top part.
Put a piece of lace all around the top part, put some dots with the pearl pen on the window Flowers and on the bottom design paper strip, stamp the rose vines with the Versafine black and color them with a mix of New Sprout and Bamboo Leaves and Vintage photo, Cut them out with the coordinating die and glue this on top of the box.
Now Stamp 5 Big Rose petals with the classic rose stamp set using Rhubarb Stalk ink and cut them out with the coordinating die, wet them with a spray of water and shape them with the deluxe flower shaping kit. After each petal you color the rose on the back with the Rose Bud. Color very lightly and when the rose is done you can put some Rhubarb stalk ink and Ink the edges of the rose to make it darker, then you can glue them on top of the rose vines.
Stamp with Rhubarb Stalk some flowers of the window box fillers on creme cardstock and cut them out with the coordinating die, I didn't color the flower itself, now shape them with the shaping kit, make a hole in the center and put a flower stamen in, now you can glue the flowers next to the rose.
Created by: Els Schutte
New Items for Black Friday....................
Love Each Other
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
Memento Dye Ink Pad - Rhubarb Stalk, TSMP301
Memento Dye Ink Pad - Rose Bud, TSMP400
Memento Dye Ink Pad - New Sprout, TSMP704
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Deluxe Flower Shaping Kit, HCST1-401
Classic Rose Vines Cling Stamp Set, HCPC-3753
Classic Rose Vines Die, HCD1-7111
Flowering Dogwood Cling Stamp Set, HCPC-3773
Flowering Dogwood Die, HCD1-7129
Stack and Store Daubers-Pack of 30, HCDA2-450
Rajni Chawla's Crystal Clear, PGM15015
Forever Love Background Cling Stamp Set, HCPC-3805
Heartfelt Love Paper Collection, HCDP1-284
Eyelet Hearts Die, HCD1-7162
Other products: Dark Pink Cardstock, Vintage Photo Ink, Lace, Pearl Heart embellishment, Golden corner stickers, Gold embossing powder, Charm, Charm clip, Versa fine Black Ink, White Pearl pen, Distress tool, Heat tool, Glue gun, Distress Ink Vintage photo, Versa mark Ink
Instructions: Cut a piece of Cardstock of 6 x 12" and fold it in half, then your card is 6 x 6". Cut a piece of designer paper from the Love paper Collection at 5 3/4" x 5 3/4". Use distress tool to distress all of the edges, tear your paper on the upper side, ink all your edges with the Vintage photo.
Take the Big forever Love Background stamp and stamp this with Versa mark Ink, sprinkle with gold embossing powder on top and melt this with your Heat tool. Glue a piece of lace behind the tear and glue the whole part on top of the card. Now mat your photo with 3D foam tape on a piece of cardstock which is a little bit bigger then the photo, Ink all the edges of the cardstock and the photo.
Cut out a heart with the Heart Die and then you place the bottom part of the photo in it stick a corner sticker on the left bottom corner of the photo and glue this all down on the top of the card. Tie a bow around the left side of the heart with a piece of lace and add an embellishment to it. You can also glue an embellishment on the piece of lace where you made the tear.
Now stamp some rose vines with the black versa fine Ink and color them with a mix of the bamboo leaves and new Sprout and Vintage photo, cut them out with the coordinating die and glue some rose vines on the bottom of the heart. Stamp some Dogwood flowers with Rhubarb Stalk and color them with Rose Bud very lightly and in the middle add some New Sprout. Cut them out with the coordinating die and shape them with the Deluxe Flower Shaping Kit. Make a hole in the centre and pull some stamens through it and cover them with Crystal clear. Now glue them on top of the vines. Decorate the front also with some dots with the pearl pen.
For the inside cut 2 pieces of Design paper of 5 3/4 x 5 3/4 inches, distress them and Ink them with Vintage Photo and glue the upper one down. Cut a heart from the eyelets heart dies and glue this on top of the design paper, stamp the word I love you from the Love sentiments with Versa mark Ink and put Gold embossing powder on it and melt it with the heat tool. Cut a dark pink border with the Sweetheart Border die and adhere to the center of the 2 1/2 x 8" with a strip of tape. Score this strip on both sides at 1 1/4 inch, add dries clear adhesive to the flaps, the bottom edge and the side edges, wrap the one inch flaps around the back of the 5 3/4 x 5 3/4" designer paper and adhere to form a pocket. Glue the whole thing down on the bottom part of your card base. Cut out a sentiment from the paper collection, Ink all the edges with Vintage photo, mat it on dark pink cardstock and glue it down on top of the pocket you just created. Cut a journaling card out from the design paper, ink the edges with Vintage Photo and mat this on cardstock and put it in your pocket and your card is ready to send!
Created by: Els Schutte
Love Potion
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
3-D Crystal Lacquer, 3D1844
Memento Dye Ink Pad - Rhubarb Stalk, TSMP301
Memento Dye Ink Pad - Rose Bud, TSMP400
Memento Dye Ink Pad - New Sprout, TSMP704
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Deluxe Flower Shaping Kit, HCST1-401
Classic Rose Vines Cling Stamp Set, HCPC-3753
Classic Rose Die, HCD1-7110
Classic Rose Vines Die, HCD1-7111
Flowering Dogwood Cling Stamp Set, HCPC-3773
Flowering Dogwood Die, HCD1-7129
Stack and Store Daubers-Pack of 30, HCDA2-450
Tropical Paradise Cling Stamp Set, HCPC-3783
Tropical Paradise Die, HCD1-7137
Rajni Chawla's Crystal Clear, PGM15015
Window Box Fillers Die, HCD1-7149
Banners Of Love Cling Stamp Set, HCPC-3803
Heartfelt Love Paper Collection, HCDP1-284
Sweetheart Borders Die, HCD1-7161
Banners Of Love Die, HCD1-7160
Other Products: Crystal (sos store), Bling on a roll small and wide, small flat back pearls, Bling Letters, Glitter sticker nr.2, Internet images lady & Butterfly, Feather, Pearl pen white, row of small silver beads, cardboard, Distress Ink Vintage photo, Tule, Versafine Black, Cutting knife, paper trimmer, ruler, pencil, glue gun, empty match box, tape, score board, cardstock crème and white, silver embossing powder, heat tool, Versamark ink
For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.
Instructions: To view a larger photo of this project, click here. First start with making construction strips, take a piece of white cardstock 12 x 12" and cut this in strips of 1" wide and 12" long score them in half and put on the back side of the strip on both 1/2 inch parts tape, then fold them in half. Use the Template from My blog http://elsschutte.blogspot.ca/p/heartfelt-creations.html and draw the outlines with a pencil on the cardboard and cut this out with a knife. For the sides you have to cut a long piece of 1 1/2" wide, now measure the sides of the bottle and make marks on every corner and cut them in with your knife (not all the way through, but just that you can bend them). Now you can use the construction strips to connect the side with the front and back, put 1 half of the strip on the front or back and then connect the side strip on the other half of the strip. The Bottom of the box stays open.
When the box is done you can cut out your pattern paper - you can use the template of the bottle for it. Ink all the sides with Vintage Photo and glue the paper on the bottle. Also cover the matchbox with pattern paper and ink the sides with the same ink, and glue this part on the top. I found a nice piece of Crystal in the SOS store and I glued that on top. Around that, glue a string of silver beads around the crystal and on top of that you can glue a Butterfly. I put Crystal Clear on the wings of the Butterfly. Around the matchbox you can attach a string of bling on the roll, the wide one, I also did this on the Bottom of the Bottle. Around the sides of the Bottle I used the small one.
Embellish the box: Fussy cut the image of the lady (or any image you like) and glue this on the bottle, adhere small flat back pearls on her neck and ear. Stamp the word Love from the banners of love set on Crème cardstock with Versamark ink, add silver embossing powder on it, heat set. Diecut with coordinating dies and adhere. I added crystal letters stickers under this. Now stamp the classic rose vines, with the Versafine black on white cardstock, and color them with Bamboo Leaves, New Sprout and Vintage Photo. Die cut with the coordinating die, and shape using the Flower shaping kit. Stamp some dogwood flowers on white cardstock with The Rhubarb Stalk ink and color lightly with Rose Bud and New Sprout inks. Die cut and shape. Add some Crystal Clear, pierce the centre and insert stamens in the centre. Die cut Classic Rose, on white cardstock using 5 big petals to make the big rose and 5 small petals to make the small rose. After each layer color the back of the rose, and when the rose is finished you can ink the top of the rose with the Rose Bud and Rhubarb Stalk inks.
Die cut the Window Box filler flowers on white cardstock. Cut the flowers off the stems, and shape, dot the centre with a pearl pen, allow to dry. Stamp some curly leaves from the Tropical Paradise set with black Ink on white cardstock. Color with the Bamboo Leaves ink and die cut. Die cut the Sweetheart Borders Die on cream cardstock and cut apart into smaller pieces, as desired.
To assemble in this order: Start rose vines, tule, roses, dogwoods. In between the flowers you can fill in some spots with the other flowers and leaves you made, so then you have a nice arrangement. In between you can use the cut a parts of the border die and adhere those under the ends of the arrangement. Add dots using the pearl pen. I added a feather, border die piece and dogwood flower to the hat. For the bottom you cut a piece of cardboard 6 1/2 x 2 1/2" and decorate with designer paper. Cut 2 pieces of cardboard of 3/4 x 1" and 2 pieces of 3/4 x 4 3/4", decorate them with pattern paper and glue them together in the center of the bottom, now you have a little box. Ink all the edges with the Vintage Photo and the Bottle will fit over it.
Created by: Els Schutte
At The Beach Folio
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
3-D Crystal Lacquer, 3D1844
Deluxe Flower Shaping Kit, HCST1-401
Ornate Borders and Pockets Die, HCD1-780
Stack and Store Daubers-Pack of 6, HCDA1-449
Window Box Fillers Die, HCD1-7149
Window Box Fillers Cling Stamp Set, HCPC-3795
Simply Classic Die, HCD1-7159
Simply Classic Cling Stamp Set, HCPC-3801
Young At Heart Paper Collection, HCDP1-283
Other Products: Cardstock cream & red, Distress Ink Vintage Photo, Scor-Tape, paper clip, brad, seam binding, blue twine, silver marker, pearl pen, corner punch, Zig markers, camera Template Silhouette store
For more tips on creating with the Young at Heart collection, watch the tutorial at https://youtu.be/kmqAVM6ibfM.
Instructions: Cut 2 pieces of 5 ½ x 8" cream cardstock and score them on 1 short side at ½", now glue these on the score line on top of each other.
Cut a nice image of the paper collection for the cover of your card, the size is a ¼" size smaller than your card, I used the paper with a palm tree and the car. I put some Crystal Lacquer on the windows so that they shine, allow to dry. Cut the corners with a corner punch, ink all the edges with Vintage Photo ink.
Stamp flowers and leaves in black ink onto cream cardstock and die cut with coordinating dies. Color with Zig markers and shape lightly using the deluxe flower haping kit, and trim flowers from stems. Adhere onto the back of truck. Using a pearl pen put dots into each flower, along greenery and on the palm tree.
For the inside top part cut out a piece of decorative paper ¼" smaller than the card and cut the edges with a corner punch. Ink all the edges and glue the paper down, cut a piece of cream cardstock at 9 ½ x 3 ½" and fold that in half, cut a half circle out of the front top, then glue the sides down so that you have a pocket, now make an harmonica card by cutting a piece of cardstock of 10 ½ x 4 ¼" and score at 1" (pocket) 4", 7", 10" then you have a piece of 1" for a pocket and a piece of ½" for a tab. Glue this tab under the left side of the pocket. Now glue the ribbon on the back of the pocket, glue the pocket on the top part of the card, close to the fold line. Make a tag for the inside 2 ¾" x 6" and cut off the top edges and put an image on it from the collection, make a hole in it and put a piece of twine through the hole.
I cut out the camera from the silhouette store (https://www.silhouettedesignstore.com/view-shape/75317) and in the hole I put a brad, only put glue on the left and bottom part and glue this on top of the pocket. Decorate the harmonica fold with some of the images of the collection or you can put some photos on it too! Tie the ribbon into a bow on top of the harmonica.
For the bottom part of the card cut out a piece of decorative paper from the collection ¼" smaller than the card, cut the corners, ink the edges. Now you take a piece of cream cardstock of 3 x 7". Take the Ornate Border die and die cut the edge as shown. Trim the strip to make a nice edge (using scissors or paper trimmer). Fold the ends of the strip to the back of the pattern paper and now you can adhere the whole thing down, creating a pocket. On the bottom of your card cut a strip of paper 5 ¼ x 1 ½" and glue this on top of the pocket. Now you can make some tags of your choice for in the pocket. I cut the tags and matted everything on cream cardstock.
Created by: Els Schutte
Jacob's Ladder in a Box
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
Ornate Borders and Pockets Die, HCD1-780
Stack and Store Daubers-Pack of 6, HCDA1-449
Beary Fun Retreat Cling Stamp Set, HCPC-3797
Young At Heart Die, HCD1-7158
Young At Heart Paper Collection, HCDP1-283
Other Products: Grayboard, Cardstock: Blue, Brown, Cream, Red, Black, Blue ribbon(5 yards), Distress Ink Vintage Photo, Silver paper, Scor-Tape
For more tips on creating with this collection watch the tutorial at https://youtu.be/kmqAVM6ibfM.
Instructions: For more images of this project see here. Cut 12 pieces of 4 x 4" out of gray board. Cover all 12 pieces on one side with pattern paper, photo, and any image you want. Distress all the edges.
Now take six pieces and put the blank side up, mark the 6 pieces ½ inch in, on both sides and 1 directly in the middle (I will put up some drawings on my blog). IMPORTANT the photos on the bottom parts are facing to the right and the photos on the top part are facing the other direction, otherwise they are upside down when you open the book!!!
Now place one piece in front of you with the lines up apply Scor-Tape on the guidelines, lay the left edge of the ribbon along the tape at the top and bottom line so that the ribbon trails to the right, place the middle ribbon the opposite direction, allowing the ribbon to trail off the left.
Now select an “ Unmarked” piece of decorated Gray board and apply tape or glue to the whole back surface of the undecorated side, place this on top of the Glued ribbons and the Gray board.
Flip the top and bottom ribbons over the decorated side of the gray board that was just glued down, the top and bottom ribbons should now trail off the left, and the middle will go to the right, do NOT adhere the ribbons!
Select another marked piece and place that with the marked side up directly on top of the first set, Repeat these steps till you have one piece left.
Before adhering the final piece of gray board trim the ribbons so that the ends are hidden when the project is complete.
Now Grab the top part and bend it then all the pages are falling down, then bend it again and they will fall again you can go on for hours…..
For the box you have to cut a piece of Black Cardstock at 10 ½ x 10 ½" and score it all the way round at 3" then cut in the score lines on 2 sides and glue the box together.
Now cut a piece of black cardstock for the lid at 7 5/8 x 7 5/8" and score this all the way round at 1 ½" and cut on the score lines on 2 sides and glue the lid together, now die cut 4 ornate borders and glue these on the sides of the lid, now you can put decorative paper on the box and some images from the collection.
Created by: Els Schutte
Vintage Garage
Other Products: Wooden sticks, Pearl pen, Chain, Piece of plastic wire, silver sticky Duct tape, Silver marker, Gears silhouette store, tire, wooden dowel. Greenery, acetate, gold sticker, rust paint Viva Décor, black marker, plaster rock, tape, hot glue, red, white and yellow cardstock, wooden blocks, Distress Ink Vintage Photo, scor-board, Twin markers CG8 – 5 – 11, acetate, black round bead.
For more tips on creating with this collection watch the tutorial at https://youtu.be/kmqAVM6ibfM.
Instructions: For a larger view of this project see here. Cut some gray board in the following sizes: Bottom 10" x 6", two times. Sides 2 ¾" x 6", Front 7"x 6", Back 7" x 6", Roof 5" x 9".
Mark the windows on the front from 1 inch on the bottom and ½ inch on the other 3 sides, in the middle window there is an extra window on a height of 3 inch with a piece of ½ inch on top of that for the sides you do the same 1 inch on the bottom and ½ inch on the other 2 sides.
First make some hinges you do that to cut a piece of Cardstock at 1" x 12" then fold it in half on your score board then on the back of the paper on both sides of the score lines you put tape, then fold them.
Now get your pieces and lay them flat on the table and lay them like this: Back – hinge – Side – Hinge – Front – Hinge – Side – Hinge, now tape the hinges on the sides of the panels in the order how they lay in front of you, don’t tape the last one down yet because it will be easier to decorate! I will put a photo on my blog! On the inside of the windows you can adhere acetate behind the windows, you can also glue a back wall piece on the back and put some white cardstock on the inside panels, then you can close the garage! Now put on all the bottom and roof sides paper hinges on the inside!!!
Put designer paper on the outside of the garage at your own taste and ink the edges!
Get your bottom part and put designer paper on it. Put your garage on it and tape it down with the hinges, put a decorative paper on the floor and cut a scooter out and make a sign for in the garage I put a strip of acetate on the back and glued it down. I also made a closed sign and glued it on the door. For the hangers I used a sticker and cut it in length. Now you can attach the roof also on the hinges!
Get your wooden popsicle sticks and glue them on the roof, ink them using Vintage Photo ink. Cut out a border from the designer paper and glue little pennant banners behind it (I cut these out by hand form red cardstock). I also made a sign of 2 leftover pieces of the sticks and I glued 2 little chain pieces on the back and then I glued it under the roof. I fussy cut a ticket image of the paper and I put Crystal Lacquer on top let it dry. Then glue it on the sign!
I cut the dowel in the good size and put Vintage Photo Distress ink on it and glued it in between the bottom and the roof. Cut out some signs, mat them on red cardstock and glue them on the dowel. Then I adhered a piece of plaster rock and some greenery on front of the dowel.
For the gas pump (I have a pattern on my blog) print this, and cut it out of gray board. Glue the pieces together and cover the gas pump with red cardstock, take the smaller pattern and use that for the yellow cardstock. Put some gold sticker lines on them and glue a meter in the middle. I also put some Crystal laquer on that. Then adhere a black bead on the side, glue a piece of black wire in it and tape some silver duct tape on the end. Adhere it on top with the glue gun, and put some greenery in front of it, put some dots on the front with a pearl pen.
Now die cut a car image you like out of designer paper and glue that on top of the roof with a piece of acetate. Decorate it with some artificial greenery. Stamp some flowers using black ink on white cardstock from the window box fillers stamp, and die cut. In the centre of each flower, I used a pearl pen.
Now stamp, colour and die cut a car you like and die cut the windows out, and glue 3 wooden blocks on the back. Then you die cut the same car out of red cardstock and glue this on the other side of the blocks. I coloured the car with the markers and a silver marker and I used the pearl pen for the mirror and wheels. Glue the car in front of the pump.
I also cut out some gears from the Silhouette store and I made them a little bit rusty, and I put them next to the door and pump.
Beary Flying Kite
Other Products: Dutch Doobadoo Stencil Kite, black marker, Spellbinders Sunflower die, white seambinding, Distress Ink: Vintage Photo, Fossilized Amber, Versafine Black, cream cardstock, kraft cardstock, Pearlpen, glue gun, tape
For more ways to use the Beary Retreat collection see this video.
Watch this video for tips on shaping the sunflowers.
Instructions: Visit this link to see a larger image. Color your ribbon with Distress Ink, Fossilized Amber and Vintage Photo and let it dry. Now cut out the kite with the template first out White cardstock, then the little parts of designer paper. Glue the kite on a piece of kraft paper and cut this out by hand. Now you can make some little dots or stripes with a black marker for a stitching effect.
Now asemble the shadow box and add an image for the background cut from designer paper.
Die cut the bear from designer paper using coordinating die. Stamp leaves and paw prints on cream cardstock using Versafine black ink and die cut with coordinating dies. Color using Bamboo Leaves and Toffee Crunch ink. Shape leaves using Deluxe flower shaping kit. Adhere the bear inside the box and adhere the whole thing on the kite. Fussy cut a sentiment from the designer paper and adhere on top.
Die cut the flower with the Spellbinder die and color it, using Fossilized Amber and Toffee Crunch ink alond with daubers. Shape using the Deluxe flower shaping kit. Add Dries Clear glue to the center of the flower and add Go Man Go prills, allow to dry.
Decorate the kite with the flowers and leaves, adding the paw prints on the side. Get your ribbon and make tiny bows of them and glue them on the tail of the kite.
Created By: Els Schutte
2,79 GB (18%) van 15 GB gebruikt
Laatste accountactiviteit: 4 uur geleden
Details |
Gerelateerde Google+ pagina
|
Winter's Eve Shadow Box Album
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Rajni Chawla's Crystal Clear, PGM15015
Festive Holly Paper Collection, HCDP1-280
Winter's Eve Paper Collection, HCDP1-281
Window Box Fillers Die, HCD1-7149
Window Box Fillers Cling Stamp Set, HCPC-3795
Card Shadow Box Set-White, HCBC1-456-2
Other Products: Gray Board, Light Blue Cardstock, Light Blue Seam Binding, Tape, White Snowflake Stickers, White Glitter Paper, Distress Ink Vintage Photo, White Pearl Pen
Instructions: Cut 2 pieces gray board of 5 x 5" and cover this with designer paper. Adhere on both sides 2 pieces of seam binding, this is for the closure.
Cut 3 Pieces of light Blue Cardstock at 8 ½ x 8 1/2". Fold this in half, then turn it and fold it in half again, then turn it and fold it once from point to point, now you fold those points to the inside. Do this with all 3 of them, you can see what I mean on my blog, I will put some photo’s there!
Now you put 1 piece with the points up, then 1 down and one up, now you can glue them on top of each other. Decorate all the parts with designer paper, I inked all the edges with Vintage Photo ink. After this you can glue them between the front and back cover.
Now assemble the shadow box, in the back you can glue a nice background, you can find this in the paper pad, then decorate some pieces with Crystal Clear. Close the box and decorate the front with some deer fussy cut out of designer paper, white glitter paper for the snow.
Stamp the leaves from the window filler stamp and die using black ink on white cardstock and diecut I colored it with the Bamboo Leaves and on top I made some berries with a pearl pen. At last I decorated the box with some snowflake stickers.
Created by: Els Schutte
Soft Pink Dogwoods
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Regal Hummingbird Cling Stamp Set, HCPC-3742
Regal Hummingbird Die, HCD1-7102
Brilliance Ink - Pearlescent Coral, TSBL32
Flowering Dogwood Cling Stamp Set, HCPC-3773
Flowering Dogwood Die, HCD1-7129
Stack and Store Daubers-Pack of 30, HCDA2-450
Tropical Paradise Cling Stamp Set, HCPC-3783
Tropical Paradise Die, HCD1-7137
Rajni Chawla's Crystal Clear, PGM15015
Festive Holiday Die, HCD1-7146
Window Box Elements Die, HCD1-7150
Beary Fun Retreat Die, HCD1-7151
Beary Fun Retreat Paper Collection, HCDP1-282
Beary Fun Retreat Cling Stamp Set, HCPC-3797
Eyelet Circle & Basics Small Die, HCD1-7154
Other Products: Kraft cardstock Letter Size, Tulle, Vintage Image, Bling On The Roll, Lace, Rose Lace, Distress Ink-Picked Raspberry, Vintage Photo, Charm, Distress Tool, Thin Rope, Ribbon, Seam Binding, Pearl Pen, Crafting Scissors
For more tips on creating with this collection watch the tutorial at https://youtu.be/DpUPW0oxiJ4.
Instructions: Fold a letter size length wise in half, then on the top half you part it in 3 pieces, cut them in to the fold line.
Fold the middle part in half, fold the side parts in a diagonal from the outside upper corner to the downside left corner they are all Mountain folds.
Cut a piece of 4 x 4 ½" of kraft and glue it on the middle piece, just on the bottom part of the fold. Then cut and adhere designer paper on all the parts of the card also on the bottom.
Distress and ink all the edges with Vintage Photo. Glue a ribbon on the bottom part and next to it a piece of bling on the roll.
Die cut 2 lattice pieces from the Window Box Elements die out of kraft paper, using a scissors cut them in half. Use one piece on the bottom and glue a piece of the rose ribbon on top. Now glue one piece on the middle panel and the other 2 pieces on the side panels.
Die cut a circle from designer paper with the Biggest Small Circle die, and two pieces with the Festive Holiday die. Then die cut the image with a smaller circle die. Arrange these pieces as shown and glue the whole thing on the middle panel.
Stamp, color and die cut the bear using Vintage Photo ink on white cardstock. Give him a little bow and glue him on top of this all.
Now stamp, color and cut the leaves and flowers from white cardstock and decorate your card with them at your own taste. I stamped and colored the flowers in Picked Raspberry ink. I stamped the leaves in black ink and colored with Memento ink. Die cut with coordinating dies and shape using the Deluxe Flower Shaping Kit. Adhere onto card as shown. Using the pearl pen, make some dots on the leaves.
Tie a bow with the tulle and add a charm on top of it, glue it on top of the middle panel. Glue another charm on the bottom of the panel, and put some Crystal Clear on the Image.
Created by: Els Schutte
Beary Fun Diorama
Other Products: Cardboard, Bead, Wire, SVG Trailer Cut File, Rope, Dowel, Pearl pen, Glitter Glue, Acetate, Score board, Rhinestone, White Cardstock, Black Cardstock, Distress Ink: Vintage Photo, Silver Paper DCWV, Twin markers: 35, 44, 92, EB5, 14, 24, 48, 43, WG1, Silhouette machine
Watch this video here for tips on how to create scenes from the Beary Retreat Collection.
Instructions: To see a close up photo of this diorama click here. Cut a piece of cardboard for the bottom of 11 x 8" and 1 piece of 2 ½ x 8" for the back wall and 1 piece of 6 x 2 ½" for the side. Put them together with a paper hinge. The paper hinges are made of cardstock, they are 12 x 1" and you score them in half and you put tape on both sides of the score mark. So put 1 hinge on the back of the bottom and 1 hinge on the left side of the bottom plate and connect them with the pieces of 2 ½" high.
Now you put designer paper on the bottom and on the back of the back part and side part to cover it as desired.
Fussy Cut 2 images out of the designer paper and glue them on the back and side part.
Die cut the SVG file of the trailer using your silhouette machine and glue it together as the instructions say.
Decorate it with flags made from designer paper glued onto a rope and the awning is made from designer paper. The antenna is wire twisted around a pencil to create the curly look. I also fussy cut a bear out of the designer paper and I put him in the door opening and a rhinestone on the wheel.
Glue a dowel on the right and make a cut a flag and glue it on top of the dowel.
Now you can stamp, the bears, campfire and sunflowers you want using black ink on white cardstock. Color them using distress ink and Twin markers listed above. Die cut with coordinating dies, then I glued them on small square of clear acetate folded in half and adhere them in front of the trailer as shown.
Stamp wild flowers, grass, hollow log and leafy greens in Bamboo Leaves onto white cardstock. Color using same ink along Twin markers as desired. Die cut with coordinating dies and adhere to clear acetate folded in half to attach onto scene base as shown.
Once all is placed as desired add some glitter glue to campfire and using a pearl pen, I added some dots on the door and above awning of the trailer. You can decorate it at your own taste, you can put as many bears you want around the campfire!
Created By: Els Schutte
Winter's Eve Trifold
Other Products: Snowflake stickers, Versafine Black, pearl pen red, small white ribbon, grey cardstock, white cardstock, Vintage Photo Distress Ink, distress tool, heat tool, 3D tape
For tips to create your own window scene check see this video here
Instructions: My card is 6" high. Take 3 pieces of the pocket and flipfolds and attach them together like a 3 folded panel. Then cut 2 off at the same height, and the middle one 1 inch longer.
Cut 6 panels out of the paper collection and distress the ends, with a distress tool. Ink all the edges and glue them on the back and front panels. Glue a ribbon in between the paper and the card so you can tie it. Fold the longer piece on the center panel, to the inside as a pocket. Add glue on both corners leaving the center open for the pocket. Die cut a border on white cardstock using two Delicate Border dies, and glue this along the pocket. For the sides I tore 2 pieces of white cardstock and glued them on the corners, only using glue on 3 sided to create a pocket. Cover the edge with Crystal Clear.
To decorate the center panel: Die cut a window frame from white cardstock using the window die. Die cut the window panes from designer paper using window panes and straight window dies. Cut an image from designer paper (I chose the tree and girl image) Adhere tree and girl imae to card base, then layer window pane on top.
Die cut the Window Box Elements shutters die from white cardstock and cut in half lengthwise. Adhere on both sides of window, then adhere white window frame.
Stamp Hollies using black ink on white cardstock and diecut. Color using Bamboo Leaves along with the daubers. Shape using the deluxe flower shaping kit. Add Frosting Powder, and heat set with the heat tool. Glue this on a corner of the window using dries clear glue.
Close your card and put a sentiment from the paper on a mat and glue that down with the 3D tape so that it pops out a little. Then decorate the front with the hollies and snowflake stickers. I also cut 4 tiny circles out of gray cardstock and glued two of them, back to back, on the end of the each ribbon. I added a snowflake sticker on them. Finally add Nuvo Red Berry drops to all the stamped berry images. Let dry.
Sea Life Layered Card
Other Products: Eiskristal Viva 923400156, Pearl pen Clear, Pearl pen white, Embossing powder gold, Versa fine Ink Onyx Black, Glue Dots, Distress Ink Vintage Photo, Fossilized Amber, White Cardstock, 2 under water plants Silhouette store, acetate, heat tool, Glue dots
Watch a video on making the Hibiscus Flower here
For tips on how to create a layered card and shadow boxes check out this video here
Instructions: Click here to see the inside pages of this layered card. Construct 6 x 6" layered card then cut designer paper for the front and white cardstock for each back side of each page (sponge edges of all pages). The first page is the largest circle, this is also the cover of the album.
I stamped the hibiscus flowers and leaves with black ink and then I colored the flowers with the Rose Bud and Fossilized Amber in the middle. I colored the leaves of the flower with Bamboo Leaves. Die cut with coordinating dies, shape using deluxe flower shaping kit, then I glued some Eiskristals in it.
I also stamped, the coral, a seahorse with black ink on white cardstock and diecut with coordinating dies and colored images. I used a quote from the designer paper for the front, cut and matted with another layer of designer paper.
Then on the back of each page I glued a piece of Acetate and Then I put 2 water plants on the back, then I covered the back of the page with white Cardstock to cover the acetate, and you also can glue some items on it like the clear water drops I made them with the Pearl Pen Clear.
For the second page I cut out an extra circle of the small Circle die set The biggest one with the scallop and the 3th one, if you cut them together you get a frame now glue this on your 2nd page and make dots with the white pearl pen. Stamp, color and cut the jelly fish, put some eiskristals on it and glue him on top of the frame, decorate the page also with those Eiskristals. Put some clear drops on the acetate, and cover the back with the White cardstock.
For the 3rd page, I stamped a fish with gold embossing powder colored, cut it and I put it on the page glue some acetate behind it, then on the back I glued a piece of Coral and then the cover with white cardstock, on top of the acetate some clear drops.
For the 4th page I made another fish, I cut out some shells from the paper and put them on glue dots so that they look 3D, behind it I put a piece of coral then acetate on the back, clear drops and white cardstock on the back.
For the last page I only used a piece of the paper with a nice image, I decorated it with Eiskristals, and clear dots.
Created By: Els Schutte
Holiday Dogwoods Layout
Other Products: Snowflake stickers, Versafine Black, pearl pen red, Light Blue cardstock, White cardstock, heat tool, Flower stamens, Needle, Any Die Shapes you like, Photo painting (Michael Schutte), Embossing tool
See the link for tips on Shaping the Flowering Dogwood
Instructions: Take a light Blue Cardstock and use the backside. Now take a few dies where you like the outside shape, lay down the die on 1 top corner and trace it with a pencil all the way around and also the inside, then put it on the opposite corner and do the same. Then you put an edge die down and do the same, if you traced them all, you going to put very tiny holes on the pencil lines, maybe 2 millimeters in between the holes, after you’ve done this turn your page and put glue on the holes, this is very easy with the fine tip! Then you cover the glue with the Crystal Clear powder.
Stamp the dove in black ink onto white cardstock and die cut. Add Crystal Clear powder on dove and adhere to layout.
Die cut a Festive Holly Decorative Arch from white cardstock. Mat a photo on white cardstock and glue this on the layout with the decorative arch under the right upper corner. Now take an sentiment from 1 of those papers and mat it on another paper from the collection and glue this under the photo.
Stamp holly, Wildwood Cottage drooping greenery and rose foliage in black ink on white cardstock and diecut with their coordinating dies. Stamp in Dogwood flowers in Toffee Crunch ink on white cardstock and diecut with coordinating dies. Stamp poinsettias in using the Frost White ink on vellum and add white embossing powder. Heat set. Color flowers and leaves. Rose Bud on the back of the poinsettias, Bamboo Leaves for the leaves and Rose Bud for the dogwoods. Shape using the Deluxe flower shaping kit. Sprinkle all pieces with the Frosting Powder. Add flower stamens the the centeres of flowers.
Arrange pieces at your own taste on your lay out and adhere. Place snowflake stickers on layout as shown.
Created By: Els Schutte
Woodland Winter's Eve
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Lady Bug, TSMP300
Nuvo Crystal Drops - Red Berry, NU667
Stack and Store Daubers-Pack of 6, HCDA1-449
Rajni Chawla's Crystal Clear, PGM15015
Rajni Chawla's Frosting Powder, PGM15016
Festive Holly & Cardinals Die, HCD1-7145
Festive Holly & Cardinals Cling Stamp Set, HCPC-3791
Winter's Eve Paper Collection, HCDP1-281
Winter's Eve Cling Stamp Set, HCPC-3796
Other Products: White cardstock, Spellbinder label, 3D snow pen, snowflake stickers, rope, Versafine black, Dutch Doobadoo card shape stencil, Markers, Vintage Photo Distress ink, 3D Foam strips
Instructions: Cut the card with the stencil out of white cardstock, fold all the score lines. Now you cut it two more times out of pattern paper without the score lines. Cut off the piece that you need for the background and front bottom. The other piece you can glue on the back but not on the folded parts.
Fussy cut some scenery images out of the paper, ink with Bamboo Leaves ink and decorate them with 3D snow, glitter and frosting powder. Glue those on both sides where the card pops up.
Stamp the sled in black ink onto white cardstock and diecut with coordinating die. Color with markers and glue that next to the label. Adhere a piece of rope on top of the sled to the back. Stamp Holly & Berry (HCPC-3791) onto white cardstock and diecut. Color using the daubers along with Bamboo Leaves ink and Lady Bug ink. Shape using the Deluxe flower shaping kit and add Nuvo Red Berry drops on the berries.
Stamp sentiment on white cardstock and diecut using Spellbinder Label die. Ink the edges using dauber and Vintage Photo ink and adhere on card base using Foam strip.
Created by: Els Schutte
Vellum Poinsettia Lantern
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
Memento Dye Ink Pad - Rose Bud, TSMP400
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Deluxe Flower Shaping Kit, HCST1-401
Embossing Powder - White, RPEJ685
Sparkling Poinsettia Cling Stamp Set, HCPC-3680
Sparkling Poinsettia Die, HCD1-766
Stack and Store Daubers-Pack of 6, HCDA1-449
Rajni Chawla's Crystal Clear, PGM15015
Festive Holly & Cardinals Die, HCD1-7145
Festive Holly & Cardinals Cling Stamp Set, HCPC-3791
Winter's Eve Paper Collection, HCDP1-281
Window Box Elements Die, HCD1-7150
Other Products: Silver beads, Light Blue Seam binding ribbon, Snowflake stickers, Light Blue cardstock, Silver Washi tape, Bling on a roll, Silver ring, Plastic Diamond, Glue gun, Heat tool, Pearl pen, Gesso, White cardstock, Cardboard, Clear acetate, Vellum, Versamark, Black Archival ink
Watch the Video on Sparkling Poinsettia
Instructions: Please visit my blog for lantern pattern. Cut the lantern pattern 4 times out of cardboard and 4 times of designer paper from the Winter's Eve paper collection and 4 times out of light blue cardstock. Cut out 4 construction strips of 1 x 9 1/2" and fold them in half. Put tape on one back of construction strip both sides of the fold. Now you can connect all the sides with the construction strips. Don’t close the lantern when it is flat, it works easier to have it shaped when adding the last construction strip. Now paint the whole lantern on the inside and outside with Gesso, let it dry. Glue your patterned paper on the front of each panel, cut out the middle but leave an 1/2 inch strip on each side so you can fold it to the inside to cover the edge. Now you can glue the Acetate pieces on the inside of the lantern. Now you can close the lantern and cover the inside with Light Blue cardstock for a nice finish, I also put a strip of silver Washi tape on top of the windows.
Die cut 4 decorative pieces from the Window Box Elements Die from white cardstock and glue them on the outside of each of the clear acetate windows. Glue a strip of the bling on the roll along the window and put some snowflake stickers on the clear acetate.
It is time to stamp, color, die cut and shape some holly and berries. I stamped and die cut 4 of the holly and berry corners in black archival ink. I colored using the holly using daubers and Bamboo Leaves ink. I put some red pearl pen on the berries, let it dry and then put some frosting powder on it and melted that with the heat tool.
I stamped the poinsettia with Versamark ink and white embossing powder. I embossed it with the heat tool then you color them on the back with the rose bud ink and daubers. Now you can die cut them using the coordinating dies, and shape them with the Deluxe Flower Shaping kit. Assemble using dries clear glue adding stamen in the center. Arrange flowers and Holly as shown and adhere using hot glue.
Make 4 holes on top of each panel and put a ribbon through it. I put a bead on the outside so that the ribbon doesn’t slide through the hole. Now on top you put all the ribbon through a silver ring so that you can hang it. Finally I glued a plastic diamond under the lantern using hot glue.
Created by: Els Schutte
Pattern lantern you can make it as big as you like.
Winter Dogwoods
Other Products: Cardstock; red and crème, flower stamen, 3Dtape, Spectrum Noir GB10, Glue gun, Versafine black, heat tool, white snowflake stickers, tape, ribbon, rope, fine liner, silver pen, corner rounder, skates file is from the silhouette store, heat tool, Twin Marker nr 5
Watch this tutorial to Tips for intricate die cutting for intricate die cutting
Watch this video for shaping the Dogwood flowers HERE
Instructions: Cut a piece of red cardstock 6 x 12", score at 6" and fold. Cut piece of paper from the paper pad at 5 ½ - 5 ½" Round the corners and adhere this on top of the card base. Die cut the skates out of crème paper using your Silhouette machine, there are 3 pieces. Using a silver pen, change the color of the blade to silver. The second part you make the heel brown with Spectrum Noir marker and the upper part you make stitches with a fine liner. Make some holes in it and put a rope true the holes and make a bow on top make the sides old with Vintage photo. On top of the blades I put some Crystal Clear for an icy appearance.
Diecut Decorative Arch from white cardstock. Stamp, and die cut the holly berries using black Onyx ink on white card stock. Color using Bamboo Leaves and the berries with a twin marker nr 5. Stamp the Dogwood flowers in Toffee Crunch ink and diecut using coordinating die. Color using sponge daubers along with Archival Brilliance Pearlescent Coral and then with the same red marker. Shape using the Deluxe Heat set and also some Crystal Clear.
Add Decorative Arch to card panel. Make a bow from seam binding ribbon and adhere that on the top corner of the card. I also added mesh ribbon as well. Place the skates on 3D tape and put them on top of that, tucking them under the ribbon a little. Decorate everything now with the flowers and the berries as shown.
Created By: Els Schutte
New The festive Holiday collection
Lighted Holiday Home
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
Clear Cardstock 8.5 x 11, GBKK811B1
Memento Dye Ink Pad - New Sprout, TSMP704
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Memento Dye Ink Pad - Morocco, TSMP201
Deluxe Flower Shaping Kit, HCST1-401
Memento Dye Ink Pad - Lady Bug, TSMP300
Stack and Store Daubers-Pack of 6, HCDA1-449
Rajni Chawla's Crystal Clear, PGM15015
Rajni Chawla's Frosting Powder, PGM15016
Festive Holly & Cardinals Die, HCD1-7145
Festive Holly Paper Collection, HCDP1-280
Festive Holly & Cardinals Cling Stamp Set, HCPC-3791
Festive Holiday Die, HCD1-7146
Holly Berry Jingle Die, HCD1-7147
Festive Holiday Cling Stamp Set, HCPC-3792
Holly Berry Jingle Cling Stamp Set, HCPC-3793
Other Products: Gray board, Flower stamen, wooden blocks, 3Dtape, Glue gun, 3D schnee soft, versafine black, heat tool, Wooden Dowels different sizes, Little string lights, Gesso, Brush, Tiny Treasures boots and dog, Homemade texture paste, stencil, cardstock for hinges, tape, distress ink Vintage photo, Pipe Cleaners, stickles silver, Window die S2078 Spellbinders, Wooden beads and buttons, String of pearls, Glossy Accent, Green tree, White tree, metal ornaments, Green Moss Construction Strips, Hot Glue, Red Ribbon
Instructions: To view a close up of this home click here. Cut out gray board the following sizes: Back 8 x 8 1/2", side 8 x 8 1/2", side 8 x 8 1/2", front 5 x 8", floor bottom 9 x 9", floor inside 8 x 5", stairs (use pattern listed on my blog), and strips of 1/2". Connect the side panels to the back & front panel with construction strips (1 x 8 1/2" ). For the small side panel I cut out a opening that is 4 3/4 x 4", in the back panel I cut out 2 windows of 1 3/4 x 2 1/4". In the right side panel there is another window in this size. Mark on the inside of the for panels a line of 5" high, put construction strips on them and then you connect the whole house together. On the construction strips you can glue the inside bottom.
Now glue the whole house on the bottom plate, cut out the stairs (see pattern on my blog) and make strips of 1/2 x 2 1/2" and lay them on top and front of the stairs, for the stair rail I put some strips on the sides and then on top I put 2 small dowels, you can decide how long and high you want to make it.
On top of the porch I glued 1 thicker dowel and on top 9 smaller ones. I also made a door 3 x 5" and some panels on the front and the small side. Now you can paint the whole house with Gesso, 2 layers. Allow to dry. Using a stencil add a stones effect on the outside & inside of the wall with a stencil and some texture paste, let dry.
Diecut 6 windows on white cardstock. Trim off the top part on 3 of them and cut clear cardstock, adhere to the back of these 3 windows. Add some glue and sprinkle with Frosting Powder around the windows as shown and heat set. Adhere these windows on the inside of the project the other 3 windows are going on the outside adding Frosting Powder to those as well. Distress building using Vintage Photo distress ink and water. Now you can add your lights where you want them and I put some green pipe cleaners around the house and stair rail.
Diecut two Arch Medallions from white cardstock and two Arch Medallion Outline from Clear cardstock, adhere together using Dries Clear Glue. Adhere to porch to appear as a railing. Die cut Lamp Post from designer paper using coordinating die along porch railing. Stamp holly images in black ink and die cut. Color using Stack and Store Daubers and the following inks: New Sprout, Bamboo Leaves, and Lady Bug Red. Shape the stamped images using the Deluxe Flower Shaping Kit. Sponge Dries clear glue onto stamped images as desired and sprinkle with Frosting Powder, heat set.
Finally decorate the house with everything at your own taste. I made tiny wreaths using pipe cleaners, adding red ribbon bows and trimmed the green tree using string pearls. I also found some tiny treasures, like the dog and the boots. Visit my blog for more information.
Created by: Els Schutte
Christmas Record
Other Products: Album record(LP), Flower stamen, wooden block, 3Dtape, Spectrum Noir GB10, Glue gun, 3D schnee soft, versafine black, heat tool, Spell Binders Circle dies
Watch this tutorial for tips on using the Festive Holly collection https://youtu.be/PufXslTDQhs.
Instructions: Diecut a circle from the paper collection, make a hole in the middle and glue this in the middle of the record. Stamp Sentiment using black ink onto circle. Stamp all the stamps from the Festive Holiday Collections I did the holly several times in black ink onto white cardstock. Color, Diecut and shape them using the Deluxe flower shaping kit. Now you can glue and Frosting powder on all of the images and melt it with the heat tool.
For the flowers I used the dogwood, stamp, diecut, color and shape them. I made a hole in the middle and then I added some stamens, give them a color with the marker, on top of the flowers I used Chrystal Clear. Now you can make a nice arrangement on the album, I put the wagon wheel on a wooden block so that you get more depth.
Winter Shaker Book
Other Products: Cardstock Red, Green, Creme, Flower stamen, 3Dtape, Spectrum Noir GB10, Glue gun, Versafine black, heat tool, Acetate, 3D snow, Gold stickers, white stickers, Bookbinders tape, Gray board, Tape, Spellbinders label die, scallop circles die, empty tape roll, ribbon
Watch this tutorial for tips on using the Festive Holly collection here.
Instructions: Cut 7 pieces of red Cardstock at 4 x 12", 7 pieces of Green Cardstock at 4 x 11", 7 pieces of Crème Cardstock at 4 x 10". Fold all pieces in half, glue the red ones on top of each other when they are folded. On the Green and the Crème pieces you put tape at the end of both short sides, you can see how to do this on my blog. Now put the Green ones in between the Red ones and tape the sides on top of each other. Now on the Crème ones you cut a shape out of the middle of the right side (you can use any shape you like) then you tape the Crème ones (only the left side) in between the Green ones like you did with the other color, don’t tape the right side yet because we are going to put a pattern paper behind the opening. In the paper pad you will find lots of images that you can use as a background, after you put the background in you can tape the right side down.
For the cover you cut gray board at 4 ¼ x 6 ¼ Cover this with pattern paper, take a piece of bookbinders tape and fold this around the spine then you can get your ribbon and tape this on the top to the back, now you can glue your covers on the album.
For the Shaker box on the cover, I used an empty spool cover the inside and outside of the spool. Now glue an image from the paper pad inside the spool and put some Crystal Clear in it. Diecut a circle from clear acetate and glue on top of spool. Diecut a circle frame using two scalloped dies on designer paper and glue this on top to complete the shaker box spool. Diecut 2 decorative arches from white cardstock and adhere them on the cover creating a circle. Adhere shaker box onto cover using hot glue. Add gold corner stickers onto corners.
Stamp Holly Berries in black ink onto white cardstock diecut with coordinating die. Color, and shape them and glue them on top of the shaker box, add some frosty accent on the berries and some 3D snow at last you can put some tiny snowflake stickers on the cover.
On each page choose designer paper and decorate as desired. I added more holly berries along the diecut frames inside.
Created By: Els Schutte
New Wedding Collection
Classic Wedding Explosion Box
Products Used
Memento Dye Ink Pad - Bamboo Leaves, TSMP707Classic Rose Cling Stamp Set, HCPC-3752
Classic Rose Vines Cling Stamp Set, HCPC-3753
Classic Rose Die, HCD1-7110
Classic Rose Vines Die, HCD1-7111
Nuvo Crystal Drops - Gloss White, NU651
Decorative Medallion Die, HCD1-7144
Classic Wedding Paper Collection, HCDP1-279
Classic Wedding Wishes Cling Stamp Set, HCPC-3790
Other Products: Couple, Ribbon, Pearls, Pearl pen crème, Glitter glue, Gray Cardstock, Acetate, Dove, Lace, gold thread, score board, distress ink Picked Raspberry, Vintage Photo, Versafine Black, Hot glue gun, Ribbon
To see how to shape the roses, watch the tutorial here.
Instructions: Take two 12 x 12" piece of gray cardstock and score it at 4 and 8" turn it and score again 4 and 8". Cut off the corners on both papers, then take a piece of 11 1/4 – 11 1/4" and score this at 3 3/4 and 7 1/2" turn it and do the same again! Cut these corner off also. Now glue them all on top of each other first the 2 big ones and then the small one. Decorate all the panels with paper from the collection. You can make some pockets too, and fussy cut tags of your choice adding gold thread if desired.
Glue the wedding couple in the middle of the box using hot glue. Diecut medallion out of gray cardstock using medallion die. This medallion will be placed behind the wedding couple to create a fence effect. I used strips of clear acetate folded in half and glued the medallion onto the strips of acetate to allow it to stand up.
Stamp Roses and leaves in Versafine Black ink and diecut with coordinating dies. Using the stack and store daubers, color leaves in Bamboo Leaves with light touches of Vintage Photo and Flowers in Picked Raspberry. Shape using Deluxe flower shaping kit following video for shaping flowers. Add desired flowers and leaves in front of couple.
Lid: Using gray cardstock cut out a square of 6 1/8 – 6 1/8" and score at 1 inch all the way round, on one side use a scissors to cut two times one on the left corner and one on the right corner just to the score line, on the opposite side of the square and repeat this process. Fold along the score line and add glue on tabs to shape lid. Cut pieces of patterned paper on top and sides of the lid and box.
Take the ribbon and create a bow and adhere this on top of the box. Arrange flowers and adhere onto lid as well as dove embellishment. Add lace along all sides of the lid. Add Nuvo drops in centers of small flowers and dots around as desired.
Created by: Els Schutte
Classic Wedding Layout
Other Products: Pink Cardstock, Gold Cardstock, Square Doily, Lace, Flatback Pearls Wedding sticker, Gems, Pearl Sticker, Heart Sticker, Pearl Pen Creme, Ribbon, Dove Embellishment, Glue Gun, Heat tool, Gold Embossing Powder, Versamark, Vellum, Sequins, Organza Ribbon, Black Versafine ink, Vintage Photo ink
Instructions: To see a larger photo of this layout click here. Take a piece of the designer paper and cut 1/4 inch off on the bottom and on one side. Take the doily and glue this on the paper little off center. Mat your photo on pink cardstock, and then on gold cardstock. Adhere directly on top of the doily. Take your lace and lay that on top of the photo on the bottom and adhere it on the back of the layout. Stamp a sentiment with the Versamark and gold embossing powder, heat emboss this and adhere it on a piece of gold cardstock, fussy cut it out and glue it above the photo.
Diecut the botanic window out of pink cardstock. Choose an image out of the designer paper, diecut using Botanic outline die. Glue this behind the window and adhere this on the right side next to the photo. Diecut a medallion out of pink cardstock and glue this under your photo.
Stamp Classic Rose flowers using black Versafine ink onto vellum and diecut with coordinating die. Color using Stack and Store Daubers using Lady Bug Red ink color roses on the back of the vellum and shape using Deluxe Flower Shaping Kit. Stamp Classic Rose Vines in black Versafine ink onto white cardstock and diecut. Color using Bamboo leaves ink, accenting with Vintage Photo ink and shape. Stamp two small rose hearts in black ink onto white cardstock, diecut, color and shape. Stamp Wedding Rings in black ink onto gold cardstock and diecut.
Adhere pieces onto layout as shown and attach sequins among vellum flowers as desired. Add pearls onto flower centers, sequins, botanic window and wedding rings. Finally finish by adding drops of the Pearl Pen to the baby's breath.
Created By: Els Schutte
Vellum Rose Diorama
Other Products: Charm, Seam binding, Pearls, Versa mark, Gold embossing powder, Pearl pen crème, Glitter glue, Pink Cardstock, White Cardstock, Acetate, Pink marker Spectrum PL2, Distress Ink Picked raspberry, Heat tool
Watch this helpful video on creating vellum roses here.
Instructions: Cut 2 pieces of white cardstock 9 x 5", score these on the short sides at 2" (both sides), then cut a piece of 7 x 5" and score this at 1" on both short sides. On one 9 x 5" piece, adhere a paper of your choice from the paper collection. On the second 9 x 5", diecut a Botanic Window Frame. Cut clear acetate to 8 1/2 x 4 1/2", adhere this behind window. Adhere Window Frame on the clear acetate. Now you take the 7 x 5" piece and diecut the Botanical Window center, you can decorate this with some glitter glue.
Now you're ready to assemble the box, take the long 9 x 5" piece with the background on it and lay that flat on your table, fold the 2 side flaps up. Take the 7 x 5" piece, fold the 2 flaps down and glue this piece in the folds of the big one. Now you take the next big piece 9 x 5" and fold the flaps back and lay this on top of the rest and glue down the flaps.
Stamp the roses on vellum using black ink and diecut. Stamp leaves in black ink some onto white cardstock and some onto vellum and diecut. Stamp Wedding Bell Garland and sentiment in Versamark along with gold embossing powder, Heat set. Diecut bells with coordinating die, using a scissors cut a set 2 bells for top. Fussy cut sentiment, mat on pink cardstock and fussy cut that a well. Color and shape all images as desired (Bamboo Leaves ink for leaves and Picked Raspberry for Flowers. Make a bow with the seam binding and place this on top, glue leaves behind it and the bell image under it on top of the bow you glue a charm and a pearl of your choice. Arrange flowers as desired on the bottom left. Add Pearls to center of flowers and use a pearl pen to embellish as you please.
Created By: Els Schutte
Elegant Handbag And Shoe
Products Used
Designer Dries Clear Adhesive, 159723Metal Tip for Adhesive Bottles, 352854
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Lady Bug, TSMP300
Classic Rose Cling Stamp Set, HCPC-3752
Classic Rose Vines Cling Stamp Set, HCPC-3753
Classic Rose Die, HCD1-7110
Classic Rose Vines Die, HCD1-7111
Stack and Store Daubers-Pack of 6, HCDA1-449
Decorative Medallion Die, HCD1-7144
Classic Wedding Paper Collection, HCDP1-279
Other Products: Vellum, Ribbon, Pearls on a string, Versafine black, Bling on a roll, Label Nestabilities, Decor sticker, Pearl pen salmon, Silver cardstock, Flatback pearls, white brads, ball chain, Key hanger, Charm, Glue gun, Fine marker black, Template shoe Viva, White Cardstock, SVGCuts (purse), gesso, Silhouette Cameo.
Click here to watch a video on vellum roses
Instructions: To see a close up view of this project click here . Cut out the SVG file of the purse with white, Silver cardstock, and Designer paper and put it together like the instructions say. I decorated the sides with an embossing folder to give it some texture. Now you can decorate the purse with a ball chain, charms and a label.
For the shoe I traced the pattern of the template on white cardstock and designer paper, glue everything together following the instructions. Now cut 2 medallions out of white cardstock, 1 for the back and 1 for the front of the shoe. Glue some bling of the roll on the edge of the shoe all the way round. Make a bow and glue it on the front of the shoe, with some pearls on a string, stick the decor sticker in front of the bow.
Now you can stamp some roses and leaves on vellum, color, die cut and shape them and put them on top of the shoe on the front. I also made some tiny flowers, I used 1 layer of the smallest rose I put some white gesso on the back and I glued them also on the front, then I cut out a label with a spellbinders die and with a black marker I put the number (size) on it and some tiny dots and glued it inside the shoe now your shoe is ready!
Created by: Els Schutte
Dalvouw means Valley fold
Bergvouw means Mountain fold
Classic Petunia Release Notes:
Move on over spring, and let summer begin…the new Classic Petunia Collection by Heartfelt Creations has arrived! No flower signifies summer more than the large trumpet shaped blossom of the gentle petunia! Surround yourself with memories of wandering through greenhouses filled to the brim with a multitude of varieties in every color, from solids to variegated, compact to blanketing and of course those showy hanging baskets and container gardens spilling over with these heat loving flowers! The becomingly illustrated cling stamp sets found within this collection will have you planning your very own garden themed paper crafts filled with trailing petunias, bountiful bouquets and lavish petunia filled hanging baskets. Three sizes of coordinating stamp and petal die cuts will allow you to recreate the ever popular petunia, making it easy to cut and shape the perfect blossom in the ideal size and color necessary for any project from handmade cards, scrapbook layouts and even altered art pieces. A beautiful selection of premade card panels and scrapbook pages filled with illustrations of graceful petunias in hanging baskets, classic terra cotta pots and pretty garden scenes showcasing elegant petunia draped wishing wells and white washed garden benches allow for ease in creating any garden variety creations. Filled with classic petunia pinks and deep purples along with pretty leaf like greens, the delicately patterned papers in this charming paper collection will transport you to your favorite garden plot! So join with us as we usher in the summer season with the tender flowers of the new Classic Petunia Collection….no fertilizing, deadheading or watering required! We promise!
Fairy Diorama Card
Heartfelt Creation Products:
Large Classic Petunia stamp HCPC -3787
Large Classis Petunia die HCD1 -7140
Small Classic Petunia stamp HC PC-3785
Small Classis Petunia die HCD1 -7139
Classic Petunia Bouquet stamp HCPC -3787
Classic petunia Bouquet die HCD1 -7141
Classic Petunia Paper Collection HCDP1-278
Ink Bamboo Leaves memento TSMP-707
Crystal Clear
Designer Dries Clear Adhesive 159723
Metal tips for adhesive 352854
Other Products: Cutting file Big card Dreaming Tree, http://www.3dsvg.com/shop/cards-svg-files/christmas-paperscape-box-cards-svg-bundle/ White Cardstock, Spellbinders label, Glitter Glue, Spectrum marker PL4, Versafine black, Paper pen purple, distress ink: Dusty Concord, Picked Raspberry
Instructions: Cut out the big card (8"-11") out of white cardstock, I changed the whole card myself on my Silhouette, then I glued the card together, put some glitter glue and crystal clear on some parts, let this dry and in the mean while you can stamp cut and color the Petunia's in the colors you like, I used purple tones and the small flowers are pink.in the centre of the flowers I put some dots with a purple paper pen.
If everything is dry you can decorate your card with the flowers you made. Then I cut out a label with a spellbinders label set and stamped a sentiment of the collection on it, on the bottom I used a strip of the design papers also on the inside of the back panel.
Created By Els Schutte
Chocolate Egg
Heartfelt Creation Products:
Large Classic Petunia stamp HCPC -3787
Large Classis Petunia die HCD1 -7140
Small Classic Petunia stamp HC PC-3785
Small Classis Petunia die HCD1 -7139
Classic Petunia Bouquet stamp HCPC -3787
Classic petunia Bouquet die HCD1 -7141
Classic Petunia paper Collection HCDP1-278
Designer Dries clear adhesive 159723
Metal tips for adhesive 352854
Ink Memento Bamboo Leaves TSMP-707
Ink Memento Toffee Crunch TSMP-805
Other Products: Styropor egg, Clay, Ribbon, wire, paper pen Salmon, Cheese cloth, Glue gun, Dark brown acrylic paint, Spectrum marker yellow GB5,
Distress ink fossilized amber.
Instructions: First glue the 2 half eggs together as one and cut a little piece of the bottom so that it will stand, then cover the whole egg with clay as smooth as you can, let it dry, in the mean while you can stamp, and cut and color the petunia's I used yellow tones, but you can do your own color! When the egg is dry you can paint it with dark brown acrylic paint, let this dry very good!
If the egg is dry you can start decorating it, first I made a bow, glue this down with the heat gun and then I put some cheesecloth in front of this, now you can put all your flowers on it in a nice arrangement, at the end I curled the wire around a pencil and stuck it in between the flowers, at the end of the wire you can glue a butterfly, and also one on the flowers. I cut the butterfly out of the petunia collection.
Created by Els Schutte
Wishing well
Large Classic Petunia stamp HCPC -3786
Large Classic Petunia die HCD1 -7140
Small Classic Petunia stamp HCPC-3785
Small Classis Petunia die HCD1 -7139
Classic Petunia Bouquet stamp HCPC -3787
Classic petunia Bouquet die HCD1 -7141
Classic Petunia paper collection HCDP1-278
Ink Bamboo Leaves memento TSMP-707
Memento Tuxedo Black ink
Flower Shaping kit
Other Products: Cutting file: , cutting machine, Cardstock: Grey, White, Brown, Ink Distress: Vintage Photo, Picked Raspberry, Paper pen light Yellow, Moss and Spanish moss, Decorative filler: Little stones,Tiny shovel, Greyboard: 5 – 7 inch, gluegun, scissors, paper trimmer
Watch this tutorial to see how to shape the petunias https://youtu.be/KOy_qNB9OAk.
Instructions: Cut out the SVG file ( http://www.fleurettebloom.com/Im-Wishing-3D-SVG-Kit_p_196.html) of Grey Cardstock and glue everything together, follow the instructions. Cut the roof parts out of Heartfelt Creations paper and bend the ends of it and ink them, now you can glue them on the roof. Make the bucket out of design paper and put a rope on it and hang it in the well, connect it to the top part with a knot, follow the instructions for this.
Stamp border petunias from the Large Petunia set in black ink onto white cardstock, color them and cut them in two, now shape them a little bit and glue them with some Spanish moss in the bucket. Stamp some Large, small petunias in black ink onto white cardstock and diecut with coordinating dies. Color them with Picked Raspberry ink and shape them. Color the leaves with Bamboo Leaves ink. I cut out some extra leaves for the top of the well.
Cut a piece of grey board 5 x 7 inch and cover this with a piece of green design paper. Glue the well on this and glue some moss around it. Now you can put some glue on the place where you want to have a path and put some very little stones on top of it, press really hard on this so that they stick very good. Cut out the bench from the Classic Petunia paper and put a little piece of acetate behind, bend it and glue the chair in the garden. Glue a shovel against the well.
You can now decorate the whole well with flowers, hanging baskets, hummingbirds and things you like. I also cut out a sentiment from the collection and I glued it on the front of the well. In the middle of the flowers I put little dots with the light yellow paper pen.
Done, now you make a wish!
Friendship Umbrella
Instructions....
https://www.heartfeltcreations.us/gallery/9747/classic-rose-umbrella
Friendship Umbrella
https://www.heartfeltcreations.us/gallery/9747/classic-rose-umbrella
2 comments:
Love all your cards my favourite is the Envelope card
Thanks marilyn!!
Post a Comment